NETGEAR WNR2000
Contents
NETGEAR Wireless-N Router WNR2000 User Manual
Model: WNR2000
Product Overview
The NETGEAR Wireless-N Router WNR2000 is designed to provide reliable wireless connectivity for your home or small office network. This desktop router supports 802.11b/g/n (draft 2.0) standards, offering fast wireless speeds for browsing, streaming, and online gaming. It is compatible with multiple voltage inputs (100-240V), ensuring broad usability.

Image: Front view of the NETGEAR Wireless-N Router WNR2000. The router is black with a textured, perforated design on its sides for ventilation. The front panel features the NETGEAR logo at the top and several indicator lights and buttons below it, including power, internet, wireless, and WPS. It stands on a small, flat black base.
Setup Guide
Follow these steps to set up your NETGEAR Wireless-N Router WNR2000:
- Unpack the Router: Carefully remove the router and all accessories from the packaging. Ensure you have the router, power adapter, and an Ethernet cable.
- Position the Router: Place the router in a central location in your home or office, away from obstructions and sources of interference like cordless phones or microwaves.
- Connect to Power: Connect the power adapter to the router's power port and then plug it into an electrical outlet. Wait for the power indicator light on the router to become stable.
- Connect to Modem: Connect one end of the Ethernet cable to the Internet (WAN) port on the router (usually yellow) and the other end to an Ethernet port on your modem.
- Connect a Computer (Optional for Setup): For initial setup, it is recommended to connect a computer directly to one of the router's LAN ports (usually numbered 1-4) using another Ethernet cable. Alternatively, you can connect wirelessly using the default Wi-Fi network name (SSID) and password found on the router's label.
- Access Setup Wizard: Open a web browser on the connected computer. The router's setup wizard should automatically launch. If not, type
routerlogin.netor192.168.1.1into the browser's address bar and press Enter. Follow the on-screen instructions to configure your internet connection and wireless settings.
Operating Instructions
Once your router is set up, you can connect your devices and manage your network.
Connecting Devices:
- Wired Connection: For devices requiring a stable, high-speed connection (e.g., desktop computers, gaming consoles), connect an Ethernet cable from the device to any of the available LAN ports (1-4) on the router.
- Wireless Connection:
- On your wireless device (laptop, smartphone, tablet), search for available Wi-Fi networks.
- Select the network name (SSID) you configured during setup (or the default one if you haven't changed it).
- Enter the wireless password (security key) when prompted.
- Your device should now be connected to the wireless network.
- WPS (Wi-Fi Protected Setup): For devices supporting WPS, press the WPS button on your router and then activate WPS on your device within two minutes to establish a secure wireless connection without entering the password.
Managing Your Network:
You can access the router's web interface by typing routerlogin.net or 192.168.1.1 into your web browser. Use the username (default: admin) and password (default: password) you set up to log in. From here, you can:
- Change Wi-Fi network name and password.
- Set up guest networks.
- Configure parental controls.
- Update firmware.
- View connected devices.
Maintenance
Regular maintenance helps ensure optimal performance and longevity of your router:
- Firmware Updates: Periodically check for and install firmware updates from the NETGEAR support website or through the router's web interface. Firmware updates often include performance improvements, security patches, and new features.
- Cleaning: Keep the router clean and free of dust. Use a soft, dry cloth to wipe the exterior. Ensure ventilation holes are not blocked.
- Placement: Avoid placing the router in enclosed spaces, near heat sources, or in direct sunlight. Optimal placement is in an open area, centrally located, and elevated if possible, to maximize Wi-Fi coverage.
- Restarting: If you experience slow speeds or connectivity issues, try restarting your router by unplugging the power adapter for 10 seconds and then plugging it back in.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Solution |
|---|---|
| No Internet Connection |
|
| Cannot Connect to Wi-Fi |
|
| Slow Wireless Speed |
|
| Forgot Router Login Password |
|
Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | WNR2000 |
| Wireless Communication Standard | 802.11b, 802.11g, 802.11n (draft 2.0) |
| Frequency Band Class | Single-Band (2.4 GHz) |
| Connectivity Technology | Wireless, Ethernet |
| Ports | 1 WAN (Internet) port, 4 LAN (Ethernet) ports |
| Input Voltage | 100-240V |
| Special Feature | WPS (Wi-Fi Protected Setup) |
| Color | Black |
| Item Weight | 1.05 pounds (approx. 0.48 kg) |
| Dimensions | 10.2 x 9.1 x 2.6 inches (approx. 25.9 x 23.1 x 6.6 cm) |
Warranty and Customer Support
NETGEAR products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official NETGEAR support website. Warranty periods may vary by region and product type.
If you encounter any issues or require technical assistance, please contact NETGEAR customer support. You can typically find support resources, including FAQs, troubleshooting guides, and contact information, on the official NETGEAR support website:
Please have your product model number (WNR2000) and serial number ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.