Antari FLR-4 Low Lying Fog Fluid Instruction Manual

Introduction

The Antari FLR-4 is a premium water-based fog fluid specifically formulated for use with Antari Low Lying Fog Machines and other standard water-based fog machines. This fluid is designed to produce a quick-dissipating fog effect, ideal for various stage and event applications. Its unique composition ensures a clean operation, leaving no oily residue, and is manufactured with high-purity ingredients for safety and machine longevity.

Safety Information

• Non-Toxic: All Antari fog fluids, including FLR-4, are certified as non-toxic when used for their intended purpose.
• Non-Irritating & Odorless: The FLR-4 fluid is formulated to be non-irritating and odorless, enhancing user comfort.
• Non-Flammable: This fluid is non-flammable, contributing to a safer operating environment.
• Eco-Friendly: Manufactured with pure, virgin polyfunctional alcohols used in food and cosmetics industries, making it eco-friendly and safe for human contact.
• Pure Water Composition: Made with DE-IONIZED pure water, free from impurities and metal content, which helps prolong the life of your fog machine.
• Leak Prevention: Bottles are foil-heat sealed to prevent leakage during transport and storage.

Setup and Preparation

1. Inspect Fluid Container: Before use, ensure the fluid bottle is sealed and undamaged.
2. Prepare Fog Machine: Ensure your fog machine is clean and in good working order. Refer to your fog machine's manual for specific instructions on fluid reservoir access.
3. Fill Reservoir: Carefully pour the Antari FLR-4 fog fluid into the fog machine's fluid reservoir. Do not overfill. Avoid mixing with other types of fog fluid unless explicitly stated by the machine manufacturer.
4. Secure Cap: After filling, securely close the fluid reservoir cap to prevent spills and contamination.

Operating Instructions

1. Power On: Turn on your fog machine and allow it to pre-heat according to its manufacturer's instructions.
2. Test Operation: Once the machine is ready, perform a brief test to ensure fog is being produced correctly.
3. Adjust Output: Adjust the fog output settings on your machine to achieve the desired effect. The FLR-4 fluid is designed for quick dissipation, making it suitable for low-lying fog effects.
4. Monitor Fluid Level: Regularly check the fluid level in the reservoir during operation to prevent the machine from running dry, which can cause damage.

Maintenance and Storage

• Fluid Storage: Store Antari FLR-4 fluid in its original sealed container in a cool, dry place, away from direct sunlight and extreme temperatures.
• Machine Cleaning: To prolong the life of your fog machine, it is recommended to periodically run a fog machine cleaning solution through it, especially if the machine will be stored for an extended period.
• Avoid Contamination: Always ensure the fluid reservoir is free from dust, debris, or other contaminants before adding fluid.

Troubleshooting

If you encounter issues with fog production, consider the following common troubleshooting steps:

• No Fog Output:
  • Check if the fog machine is powered on and fully heated.
  • Ensure the fluid reservoir has sufficient fluid.
  • Verify that the pump is functioning and not clogged.
  • Inspect the nozzle for blockages.
• Weak or Inconsistent Fog:
  • Confirm the fluid level is adequate.
  • Check for air bubbles in the fluid line.
  • Ensure the machine is not overheating or underheating.
  • Consider cleaning the machine with a dedicated cleaning solution.
• Unusual Odor:
  • While Antari FLR-4 is odorless, an unusual smell might indicate contamination or a machine issue. Drain the fluid, clean the machine, and refill with fresh fluid.

For persistent issues, consult your fog machine's specific user manual or contact Antari customer support.

Specifications