Timberland TBL13319JS/02

Download PDF
Contents

Timberland Hydroclimb Analog Multifunction Watch

Model: TBL13319JS/02

1. Introduction

Thank you for choosing the Timberland TBL-13319JS-02 Hydroclimb Analog Multifunction Watch. This timepiece is designed for durability and functionality, featuring a robust stainless steel case, a precise quartz chronograph movement, and specialized functions for date, tide, and moon phase tracking. Its water resistance makes it suitable for various outdoor activities.

Timberland Hydroclimb Watch, front view

Figure 1: Front view of the Timberland Hydroclimb Watch with a black dial and yellow silicone strap.

2. Setup and Initial Use

2.1 Setting Time and Date

  1. Pull the Crown: Gently pull the crown (the knob on the side of the watch case) out to the first or second click position, depending on your model's specific functions.
  2. Adjust Time: Rotate the crown to set the hour and minute hands. Ensure you set the correct AM/PM for the date change mechanism.
  3. Adjust Date: If applicable, rotate the crown in the opposite direction or pull it to a different click position to adjust the date.
  4. Push Crown Back: Once set, push the crown back in completely to start the watch movement and ensure water resistance.

2.2 Setting Tide and Moon Phase Functions

The Hydroclimb watch features dedicated tide and moon phase indicators. Specific adjustment procedures for these functions may vary. Typically, these are set using dedicated pushers or by manipulating the crown in specific positions. Refer to the detailed diagram in a comprehensive manual for precise instructions on calibrating these features based on your local tide and moon cycle data.

3. Operating the Watch

3.1 Chronograph Function

Your watch is equipped with a chronograph for measuring elapsed time.

  • Start: Press the upper pusher (button) to start the chronograph.
  • Stop: Press the upper pusher again to stop the chronograph.
  • Reset: Press the lower pusher to reset the chronograph hands to zero.

3.2 Water Resistance

This watch is water resistant to 100 meters (330 feet). This makes it suitable for snorkeling and swimming. It is not suitable for diving. Ensure the crown is fully pushed in before any water exposure to maintain water resistance.

Timberland Hydroclimb Watch on a wrist

Figure 2: The Timberland Hydroclimb Watch displayed on a wrist, showing its size and fit.

4. Maintenance and Care

  • Cleaning: Clean the watch case and strap regularly with a soft, damp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is dry before storing.
  • Avoid Extreme Temperatures: Do not expose the watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect its accuracy and seals.
  • Chemicals: Avoid contact with solvents, detergents, perfumes, and cosmetic products, which can damage the case, strap, or seals.
  • Battery Replacement: When the watch stops or the second hand jumps irregularly, the battery needs replacement. This should be performed by a qualified watch technician to ensure proper sealing and function.

5. Troubleshooting

ProblemPossible CauseSolution
Watch not runningDepleted batteryReplace battery (professional service recommended).
Incorrect time/dateCrown not fully pushed in; incorrect settingEnsure crown is pushed in. Re-set time/date as per Section 2.1.
Condensation under crystalTemperature change; seal compromiseAvoid sudden temperature changes. If persistent, seek professional service.

6. Specifications

  • Model Number: TBL13319JS/02
  • Movement: Quartz
  • Case Diameter: 43 Millimetres (approx. 44mm wide)
  • Case Thickness: 13 Millimetres (approx. 14mm thick)
  • Case Material: Solid Stainless Steel
  • Crystal: Mineral glass with sapphire coating
  • Band Material: Yellow Silicone Rubber
  • Band Width: 24mm
  • Water Resistance: 100 meters (330 feet)
  • Functions: Chronograph, Date, Tide, Moon Phase
  • Weight: 136.08 g
  • Batteries: 1 Product Specific battery (included)
Watch size comparison chart

Figure 3: General watch size comparison chart, illustrating various case diameters.

7. Warranty and Support

This Timberland watch comes with a 2-year store warranty, as stated in the product description. For warranty claims or technical support, please contact the seller of record or an authorized Timberland service center. Keep your purchase receipt as proof of purchase.

Timberland watch gift box

Figure 4: The original Timberland gift box in which the watch is packaged.

For more information or to explore other Timberland products, visit the official Timberland Store on Amazon.

© 2023 Timberland. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.