Product Overview
The Woodford RK-101 Repair Kit is a genuine replacement component designed for use with Woodford Model 101 Anti-Siphon Wall Faucets. This kit provides the necessary parts to restore the functionality of your faucet, addressing common wear and tear issues.
Included Components
- Handle Screw
- Wheel Handle
- Packing Nut
- EPDM Packing
- Packing Support Washer
- Antiturbulence Sleeve
- Check Valve
- Valve Seat Rubber
- Retainer Screw
- Vacuum Breaker Float Kit
Image: All components of the Woodford RK-101 Repair Kit, including the handle, various washers, screws, and valve parts, neatly arranged for identification.
Installation Instructions
Follow these steps carefully to install the Woodford RK-101 Repair Kit components into your Woodford Model 101 Anti-Siphon Wall Faucet. If you are unsure about any step, consult a qualified plumber.
- Preparation: Locate the water shut-off valve for the faucet you are repairing and turn off the water supply completely. Open the faucet to drain any remaining water.
- Disassembly: Carefully remove the existing handle and any other external components. Use appropriate tools to unscrew and remove the old internal parts, such as the packing nut, old packing, and valve seat components. Note the order and orientation of each part as you remove it.
- Inspection: Clean the inside of the faucet body and inspect it for any corrosion or damage that might prevent proper sealing of the new parts.
- Component Replacement:
- Install the new Valve Seat Rubber and Retainer Screw.
- Insert the Antiturbulence Sleeve and Check Valve.
- Place the EPDM Packing and Packing Support Washer onto the stem.
- Thread on the new Packing Nut, tightening it securely but not excessively.
- Assemble the Vacuum Breaker Float Kit as per the original configuration.
- Reassembly: Reattach the Wheel Handle and Handle Screw. Ensure all connections are snug.
- Testing: Slowly turn the water supply back on. Check for any leaks around the faucet body, handle, and spout. Operate the faucet several times to ensure smooth operation and proper water flow. If leaks persist, re-check the installation of each component.
Maintenance
Regular maintenance can extend the life of your Woodford faucet and its components. While the RK-101 is a repair kit, understanding general maintenance practices is beneficial.
- Winterization: For outdoor faucets, ensure proper winterization procedures are followed to prevent freezing and damage, especially to the anti-siphon mechanism.
- Leak Detection: Periodically check for drips or leaks. Addressing minor leaks promptly can prevent larger issues and water waste.
- Component Inspection: If you notice reduced water flow or difficulty operating the handle, it may indicate wear on internal components. Consider inspecting the parts for signs of degradation.
Troubleshooting
This section addresses common issues that may arise after installing the repair kit or during general use of your Woodford Model 101 faucet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Faucet still leaks after repair. |
|
|
| Water flow is restricted. |
|
|
| Handle is stiff or hard to turn. |
|
|
Specifications
| Manufacturer | Woodford |
| Part Number | RK-101 |
| Item Weight | 4 ounces |
| Product Dimensions | 5 x 2 x 7 inches |
| Item Model Number | RK-101 |
| Material | Rubber |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
| ASIN | B008B6GYHI |
| Date First Available | June 13, 2012 |
Warranty Information
Specific warranty details for the Woodford RK-101 Repair Kit are provided by the manufacturer. Please refer to the packaging or contact Woodford directly for comprehensive warranty terms and conditions.
Customer Support
For technical assistance, questions regarding installation, or to inquire about additional replacement parts, please contact Woodford customer support. Contact information can typically be found on the manufacturer's official website or product packaging.
