1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Vortice Record Extractor Fan M10/4T 100mm with Timer. This unit is designed for intermittent or continuous ventilation in small to medium domestic or commercial premises, such as bathrooms, utility rooms, or kitchens. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Figure 1: Front view of the Vortice Record Extractor Fan M10/4T 100mm with Timer. This image displays the fan's white casing and central circular grille.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Installation must be carried out by a qualified electrician in accordance with all local and national wiring regulations.
- Always disconnect the power supply before performing any installation, maintenance, or cleaning.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not use this fan with any solid-state speed control device.
- Ensure that the air discharge is not obstructed.
- The fan must not be installed in areas where the ambient temperature exceeds 40°C (104°F).
3. Package Contents
Carefully unpack the product and check for any damage. If any components are missing or damaged, contact your retailer immediately.
- Vortice Record Extractor Fan M10/4T unit
- Instruction Manual
- Mounting hardware (screws, wall plugs)
- Power cord (may not be included depending on regional regulations or specific model variant)
4. Specifications
The following table outlines the key technical specifications for the Vortice Record Extractor Fan M10/4T 100mm with Timer.
| Feature | Specification |
|---|---|
| Brand | Vortice |
| Model Name | M10/4T (11630) |
| Electric Fan Design | Exhaust Fan |
| Power Source | Electrical Cable |
| Voltage | 240 Volts |
| Wattage | 16 Watts |
| Air Flow Capacity | 85 Cubic Meters Per Hour (approx. 50 CFM) |
| Noise Level | 39 Decibels |
| Blade Length | 100 Millimeters |
| Item Weight | 0.43 Kilograms (approx. 15.1 ounces) |
| Package Dimensions | 18.4 L x 7.6 H x 13.0 W (centimeters) / 7.6 x 5.39 x 3.23 (inches) |
| Installation Type | Wall Mount |
| Room Type | Bathroom |
| Special Feature | Timer Function |
| Control Method | Touch (likely referring to external switch) |
| Finish Type | Metallic |
| Certification | CE Approved |
Figure 2: Technical data and energy label for the Vortice Record Extractor Fan. Key data points include a maximum flow rate of 82 m³/h, total electrical power consumption of 14.3 W at maximum flow, and a sound power level (LWA) of 51 dB(A).
5. Installation
Installation should only be performed by a qualified professional to ensure compliance with electrical safety standards and optimal performance.
5.1. Choosing a Location
Select a suitable wall-mount location, typically in a bathroom or utility area, ensuring adequate space for the fan and ducting. Avoid locations directly above heat sources or where the fan might be exposed to direct water spray.
Figure 3: Example of a Vortice extractor fan installed on a wall in a room, demonstrating typical placement for ventilation.
5.2. Mounting and Wiring
- Prepare the Opening: Create an appropriate opening in the wall for the fan's ducting, typically 100mm in diameter. Refer to the dimensional drawing for precise measurements.
- Secure the Fan: Mount the fan unit securely to the wall using the provided mounting hardware. Ensure it is level and stable.
- Electrical Connection: Connect the fan to the main electrical supply. The M10/4T model includes a timer function, which requires specific wiring to a switched live and permanent live supply. Consult the wiring diagram provided with the product packaging or a qualified electrician for correct connection.
- Ducting: Connect appropriate ducting to the fan's outlet to direct extracted air outdoors. Ensure all connections are sealed to prevent air leakage.
Figure 4: Technical drawing illustrating the dimensions of the Vortice Extractor Fan, including overall width (A), height (B), depth (C), and duct diameter (E, F).
6. Operation
The Vortice Record Extractor Fan M10/4T is designed for simple operation, typically controlled via an external light switch or a dedicated fan switch.
6.1. Basic On/Off
When connected to a light switch, the fan will activate when the light is turned on. When connected to a dedicated fan switch, simply toggle the switch to turn the fan on or off.
6.2. Timer Function
The M10/4T model features an adjustable timer. After the fan is switched off (e.g., by turning off the light), the fan will continue to operate for a preset duration before automatically shutting down. This duration can typically be adjusted using a small potentiometer located within the fan unit (access usually requires removing the front cover and disconnecting power). Experiment with the timer setting to achieve the desired run-on time for effective ventilation.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your extractor fan. Always disconnect the power supply before any maintenance.
7.1. Cleaning the Exterior
Wipe the exterior of the fan with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
7.2. Cleaning the Fan Blades
Periodically, dust and debris may accumulate on the fan blades, reducing efficiency. To clean:
- Disconnect Power: Ensure the fan's power supply is completely disconnected at the circuit breaker.
- Remove Cover: Carefully remove the front grille or cover of the fan.
- Clean Blades: Gently clean the fan blades and surrounding areas with a soft brush or a vacuum cleaner with a brush attachment. Avoid bending the blades.
- Reassemble: Once clean, reattach the cover securely.
Figure 5: Internal view of the Vortice Extractor Fan, showing the fan blades and motor housing, which may require periodic cleaning.
8. Troubleshooting
If you encounter issues with your Vortice Extractor Fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply Faulty wiring Internal fault | Check circuit breaker and wall switch. Ensure correct wiring (consult electrician). If problem persists, contact support. |
| Fan is excessively noisy | Loose mounting Obstruction in fan blades Motor issue | Ensure fan is securely mounted. Disconnect power and check for obstructions. If noise persists, contact support. |
| Insufficient air extraction | Blocked ducting Dirty fan blades Incorrect fan size for room | Check ducting for blockages. Clean fan blades as per maintenance section. Ensure fan is appropriately sized for the room volume. |
| Timer not working correctly | Incorrect timer setting Wiring issue | Adjust the timer potentiometer. Verify timer wiring with an electrician. |
For issues not listed here or if solutions do not resolve the problem, please contact qualified technical support.
9. Warranty and Support
9.1. Warranty Information
Please refer to the warranty card or documentation included with your purchase for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
9.2. Customer Support
For technical assistance, spare parts, or service, please contact your retailer or visit the official Vortice website for support contact information.
