Thermaltake SP-1200MPCBUS

Download PDF
Contents

Thermaltake Smart M 1200W Power Supply User Manual

Model: SP-1200MPCBUS

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your Thermaltake Smart M 1200W Semi-Modular Power Supply. This power supply unit (PSU) is designed to deliver stable and reliable power to your computer system, featuring 80 PLUS Bronze efficiency and a semi-modular cable design for improved airflow and easier installation.

Please read this manual thoroughly before installation and keep it for future reference.

2. Safety Information

To prevent personal injury or damage to your equipment, observe the following safety precautions:

  • CAUTION! HAZARDOUS AREA: Do not open the power supply casing. High voltages are present inside.
  • No serviceable components inside: Refer all servicing to qualified service personnel.
  • Ensure the power supply is disconnected from the AC power outlet before installation or maintenance.
  • Install the power supply in a well-ventilated area, away from heat sources and moisture.
  • Use only the cables provided with the power supply.
  • Do not force connectors. Ensure correct orientation before plugging in cables.

3. Package Contents

Verify that your package contains the following items:

  • Thermaltake Smart M 1200W Power Supply Unit
  • Modular Cable Set (PCI-E, SATA, Peripheral)
  • Main Power Cable (24 Pin, attached)
  • ATX 12V (4+4 Pin) Cable (attached)
  • EPS 12V (8 Pin) Cable (attached)
  • AC Power Cord
  • Mounting Screws
  • User Manual (this document)

4. Setup and Installation

Follow these steps to install your power supply:

  1. Prepare Your System: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case.
  2. Mount the Power Supply: Insert the power supply into the designated PSU bay in your computer case. Secure it with the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing down or into the case, depending on your case design).
    Top view of the Thermaltake Smart M 1200W Power Supply, showing the large cooling fan with a protective grille and the Thermaltake 'Tt' logo in the center.

    Image: Top view of the Thermaltake Smart M 1200W Power Supply, showing the large cooling fan with a protective grille and the Thermaltake 'Tt' logo in the center. This is the side that typically faces into or out of the PC case for cooling.

  3. Connect Main Power Cables:
    • Connect the 24-pin Main Power connector to your motherboard.
    • Connect the ATX 12V (4+4 Pin) and/or EPS 12V (8 Pin) connectors to your motherboard's CPU power sockets.
  4. Connect Modular Cables: Identify the necessary modular cables for your components (graphics cards, SSDs, HDDs, optical drives). Plug these cables into the corresponding ports on the power supply unit and then connect them to your devices.
    Side view of the Thermaltake Smart M 1200W Power Supply, showing the semi-modular cable connection panel with labeled ports for PCI-E, Peripheral, and SATA cables.

    Image: Side view of the Thermaltake Smart M 1200W Power Supply, showing the semi-modular cable connection panel. Ports are clearly labeled for PCI-E, Peripheral, and SATA cables, allowing users to connect only the necessary cables.


    Close-up view of the modular cable connections on the Thermaltake Smart M 1200W Power Supply, showing various colored wires plugged into the PCB.

    Image: Close-up view of the modular cable connections on the Thermaltake Smart M 1200W Power Supply. This image highlights the individual cable connections to the power supply's PCB, demonstrating the semi-modular design.

  5. Connect AC Power: Once all internal connections are secure, close your computer case. Connect the AC power cord to the power supply's inlet and then to a wall outlet.
    Rear view of the Thermaltake Smart M 1200W Power Supply, showing the AC power inlet, the main power switch, and a honeycomb ventilation grille.

    Image: Rear view of the Thermaltake Smart M 1200W Power Supply, featuring the AC power inlet, the main power switch (labeled 'I' for On, 'O' for Off), and a honeycomb ventilation grille for exhaust.

  6. Power On: Ensure the power switch on the back of the PSU is in the 'I' (On) position. You can now power on your computer.

5. Operating Instructions

The Thermaltake Smart M 1200W PSU is designed for continuous operation in a home or office system. It features an intelligent RPM control for its 135mm hydraulic bearing fan, which adjusts fan speed based on load and temperature to maintain optimal cooling and quiet operation.

  • Power On/Off: Use the main power switch on the rear of the PSU to cut off all power to the unit. For normal operation, leave this switch in the 'I' (On) position and use your computer's power button.
  • Efficiency: The unit meets 80 PLUS Bronze efficiency at 115Vac input, providing up to 85% efficiency. This helps reduce energy consumption and heat generation.
  • C6/C7 States Ready: Optimized for modern CPU power-saving states.

6. Maintenance

Proper maintenance ensures the longevity and performance of your power supply:

  • Dust Removal: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
  • Environmental Conditions: Operate the power supply within the specified temperature range of 0°C to +40°C and humidity range of 20% to 90% (non-condensing).
  • Cable Management: Ensure cables are neatly routed to avoid obstructing airflow within the computer case.

7. Troubleshooting

If you encounter issues with your power supply, try the following steps:

  • No Power:
    • Check if the AC power cord is securely connected to both the PSU and the wall outlet.
    • Ensure the main power switch on the PSU's rear panel is in the 'I' (On) position.
    • Verify all power cables (24-pin, CPU, PCI-E, SATA) are correctly and firmly connected to the motherboard and components.
    • Test the wall outlet with another device to ensure it has power.
  • System Instability/Random Shutdowns:
    • Ensure the power supply is adequately ventilated and not overheating.
    • Check for loose cable connections.
    • Confirm that your system's power requirements do not exceed the PSU's capacity.
  • Unusual Noises: If you hear grinding or excessive fan noise, ensure no cables are obstructing the fan. If the noise persists, contact support.

If these steps do not resolve the issue, please contact Thermaltake customer support.

8. Specifications

Detailed technical specifications for the Thermaltake Smart M 1200W Power Supply:

Product label of the Thermaltake Smart M 1200W Power Supply, displaying detailed electrical specifications, certifications, and warnings.

Image: Product label of the Thermaltake Smart M 1200W Power Supply. This label provides critical information including model number (SP-1200AH5CSB), input/output voltages, maximum currents, total power, and safety certifications.

FeatureSpecification
ModelSP-1200MPCBUS
Max. Output Capacity1200W
Peak Output Capacity1440W
Efficiency80 PLUS Bronze (Up to 85%)
PFC (Power Factor Correction)Active PFC
Input Voltage100V - 240V
Input Current15A
Input Frequency Range50Hz – 60Hz
Cooling System13.5cm Hydraulic Bearing Fan
MTBF100,000 hrs minimum
Operating Temperature0°C to +40°C
Operating Humidity20% to 90%, non-condensing
Dimensions (W x H x D)150mm x 86mm x 160mm
ProtectionsOCP, OVP, UVP, OPP, SCP
Main Japanese Capacitors105°C/221°F rated
Connectors1x 24 Pin Main Power, 1x ATX 12V (4+4 Pin), 1x EPS 12V (8 Pin), 12x SATA (5 Pin), 6x PCI-E (6+2 Pin), 6x Peripheral (4 Pin), 1x FDD Adapter (4 Pin)

9. Warranty Information

The Thermaltake Smart M 1200W Power Supply comes with a 5-Year Warranty. For detailed warranty terms and conditions, please refer to the official Thermaltake website or contact customer support.

Warranty information can also be found at: www.thermaltakeusa.com/warranty

10. Support

For technical assistance or customer service, please contact Thermaltake support:

  • Phone: 1-800-988-1088
  • Email: support@thermaltakeusa.com
  • Website: Visit the official Thermaltake website for FAQs, drivers, and additional product information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.