Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Elkay VRC8WSK Vandal Resistant EZH2O Bottle Filling Station with Bi-Level Cooler. Designed for durability and user convenience, this unit offers both a quick bottle fill and a traditional water fountain, promoting sustainability by reducing plastic bottle waste.
Key Features:
- Stainless steel clad, vandal-resistant construction.
- EZH2O Bottle Filling Station for clean, quick fills.
- Bi-level cooler design for accessibility.
- Heavy-duty, push-button water fountain with stainless steel cabinet and galvanized structural steel chassis.
- Quick fill rate (1.5 GPM) with laminar flow to prevent splashing.
- Vandal-resistant, chrome-plated bubbler.
- LCD Green Ticker display showing the number of plastic bottles saved.
- Refrigerated water for a refreshing drink.
Setup and Installation
The Elkay VRC8WSK is designed for wall-mounted installation using a hanger bracket. Ensure the installation location provides adequate space and access for plumbing and electrical connections, as well as proper ventilation for the refrigeration unit.
Installation Steps:
- Site Preparation: Choose a sturdy wall location capable of supporting the unit's weight (64 lbs / 118 lbs shipping weight) and dimensions (18.63"D x 36.13"W x 38.81"H). Ensure compliance with ADA guidelines for accessibility.
- Mounting Bracket: Securely attach the hanger bracket to the wall according to the provided template (not included in this manual, refer to manufacturer's full installation guide).
- Unit Placement: Carefully lift and place the bottle filling station onto the secured hanger bracket.
- Plumbing Connections: Connect the water supply and drain lines. The unit features bottom access for plumbing. Ensure all connections are watertight.
- Electrical Connection: Connect the unit to a standard corded electric power source. The unit operates at 370 watts.
- Testing: After installation, slowly turn on the water supply and check for leaks. Plug in the unit and verify proper operation of both the bottle filler and water fountain.
Image: Elkay VRC8WSK Bi-Level Bottle Filling Station, showcasing its wall-mounted design and dual functionality.
Image: Technical drawing illustrating the dimensions of the Elkay VRC8WSK unit.
Operating Instructions
Using the Bottle Filling Station:
- Place your water bottle directly under the filling nozzle.
- Press the designated button for bottle filling. The water will flow at a quick rate (1.5 GPM) with laminar flow to minimize splashing.
- The bottle filler features an automatic 20-second shut-off timer. Release the button or remove the bottle when full.
- Observe the LCD Green Ticker display, which tracks the number of disposable plastic bottles saved.
Image: Close-up view of the EZH2O Green Ticker display, showing the count of saved plastic bottles.
Using the Water Fountain:
- Locate the push-button bubbler on the cooler basin.
- Press the button to activate the water stream. The vandal-resistant, chrome-plated bubbler is designed to direct water flow away from the spout for hygienic use.
- Release the button to stop the water flow.
Image: The lower water fountain basin of the Elkay VRC8WSK, showing the bubbler and drain.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Elkay EZH2O Bottle Filling Station.
Cleaning:
- Clean the stainless steel surfaces regularly with a mild soap and water solution, or a stainless steel cleaner. Avoid abrasive cleaners or scouring pads that can scratch the finish.
- Wipe down the bubbler and bottle filler nozzle to prevent mineral buildup.
- Ensure the drain area is clear of debris to maintain proper drainage.
Filter Status:
This specific model is non-filtered. If you have a filtered variant, monitor the filter status light and replace the filter cartridge as recommended by the manufacturer to ensure continued water quality.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow from bubbler or bottle filler. | Water supply off, unit unplugged, clogged lines. | Check water supply valve. Ensure unit is plugged in. Inspect and clear any visible clogs. |
| Water is not cold. | Refrigeration unit not powered, insufficient ventilation, thermostat setting. | Verify power. Ensure adequate airflow around the unit. Consult the full manual for thermostat adjustment. |
| Slow water flow. | Low water pressure, clogged aerator/nozzle. | Check building water pressure. Clean the bubbler and bottle filler nozzle. |
| Water leaks. | Loose plumbing connections, damaged seals. | Inspect all plumbing connections and tighten if necessary. If leaks persist, contact a qualified plumber or Elkay customer service. |
For more complex issues, please refer to the complete Elkay VRC8WSK service manual or contact Elkay customer support.
Specifications
| Model Number | VRC8WSK (Related variant: VRCTL8WSK) |
| Brand | Elkay |
| Color | Stainless Steel |
| Material | Stainless Steel |
| Product Dimensions (D x W x H) | 18.63"D x 36.13"W x 38.81"H |
| Item Weight | 64 Pounds |
| Wattage | 370 watts |
| Installation Type | Hanger Bracket |
| Access Location | Bottom |
| Power Source | Corded Electric |
| Style Name | Non-filtered |
| UPC | 094902771809 |
Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your product or visit the official Elkay website. Elkay provides support for their products to ensure customer satisfaction.
Contact Elkay:
- Visit the Elkay Store on Amazon for product information.
- Refer to the manufacturer's website for detailed contact information and support resources.
