1. Safety Information
Read and understand all instructions before beginning installation. Failure to follow these instructions could result in electric shock, fire, or serious personal injury.
- Ensure the installation site is structurally sound and can support the fan's weight (24.9 pounds).
- All wiring must be in accordance with national and local electrical codes.
- Disconnect power at the main circuit breaker before installation or servicing.
- Do not operate the fan with damaged blades or housing.
- Keep hands, clothing, and other objects clear of the fan blades when in operation.
- This fan is rated for outdoor usage.
2. What's in the Box
Verify that all components are present before beginning installation.
- Craftmade K10795 DC Epic Ceiling Fan Motor
- Premier Reversible Hand-Scraped Walnut/Walnut Blades (5 blades)
- Downrod
- Remote Control
- Mounting Hardware
- Instruction Manual
Image: All components of the Craftmade K10795 70-inch DC Epic Ceiling Fan, including the motor, five reversible blades, downrod, remote control, and mounting hardware.
3. Setup and Installation
Professional installation is recommended. Ensure power is disconnected at the circuit breaker before proceeding.
3.1 Mounting the Bracket
- Locate a suitable ceiling joist or outlet box capable of supporting the fan's weight.
- Secure the mounting bracket to the ceiling using the provided screws and washers.
3.2 Assembling the Fan
- Attach the downrod to the fan motor assembly.
- Carefully route the electrical wires through the downrod.
- Attach the fan blades to the blade holders, then secure the blade holders to the motor housing. Ensure all screws are tightened.
3.3 Wiring the Fan
- Hang the fan assembly onto the mounting bracket.
- Connect the fan's electrical wires to the household wiring according to the wiring diagram (typically black to black, white to white, and green/bare copper to ground).
- Ensure all connections are secure and insulated with wire nuts.
3.4 Final Assembly
- Secure the canopy to the mounting bracket, covering the wiring connections.
- Restore power at the circuit breaker.
- Test the fan operation using the remote control.
4. Operating Instructions
Your Craftmade K10795 fan is operated via the included remote control.
4.1 Remote Control Functions
- Fan ON/OFF: Press the power button to turn the fan on or off.
- Fan Speed: Use the speed buttons to cycle through the available fan speeds (e.g., Low, Medium, High).
- Reverse Function: A button on the remote or fan housing allows you to change the direction of blade rotation for summer (downward airflow) or winter (upward airflow) operation.
Note: Ensure the remote control has fresh batteries for optimal performance.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents.
- Blade Balance: If the fan wobbles, check that all blade screws are tight. A balancing kit (not included) can be used if wobbling persists.
- Annual Inspection: Periodically check all connections and mounting hardware for tightness.
Caution: Always disconnect power at the circuit breaker before cleaning or performing any maintenance.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery dead. | Check circuit breaker; Verify all wire connections are secure; Replace remote control batteries. |
| Fan wobbles excessively | Loose blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Use a blade balancing kit; Ensure mounting bracket is securely fastened. |
| Remote control not working | Dead batteries; Remote not paired with fan. | Replace batteries; Refer to remote pairing instructions (usually in a separate remote manual or quick start guide). |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Craftmade |
| Model Number | K10795 |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Style | Mission |
| Special Feature | Remote Control |
| Mounting Type | Downrod |
| Controller Type | Remote Control |
| Material | Wood |
| Wattage | 27 Watts |
| Number of Blades | 5 |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Outdoor |
| Control Method | Remote |
| Safety Specification | cULus Listed |
| Finish Type | Oiled Bronze |
| Collection Name | DC Epic |
| Item Weight | 24.9 pounds |
| Size | 70 inches |
| UPC | 647881140847 |
8. Warranty Information
Craftmade provides the following warranty for this product:
- Replacement Parts: All products purchased have a 30-day replacement parts policy to ensure a fully working item.
- Product Warranty: All products are covered under a 1-Year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped.
- Coverage: The warranty covers all items and conditions identified in the original manufacturer's warranty.
- Exclusions: Items specifically not covered by the warranty include loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
For warranty claims, please retain your proof of purchase.
9. Customer Support
If you have any questions, require assistance, or need to report a missing part, please contact Craftmade customer support.
- Online Support: Visit the official Craftmade website for FAQs and support resources.
- Contact Information: Refer to the packaging or the official Craftmade website for current contact details (phone number, email).
Please have your model number (K10795) and proof of purchase ready when contacting support.
