Introduction
The Pro Co 10 Feet Premium Canare AES EBU Cable is engineered to provide reliable and error-free digital audio transmission for high-end audio equipment. Utilizing Canare DA202 wire and Neutrik gold connectors, this cable ensures optimal performance for professional audio applications, including recording studios and live sound rigs.
Key Features
- Connector Type: XLR Male to XLR Female
- Cable Type: AES/EBU Digital Audio Cable
- Length: 10 feet (approximately 3.05 meters)
- Wire: Canare DA202 for superior performance
- Connectors: Neutrik gold connectors for maximum stability and transmission
- Durability: Suitable for both indoor and outdoor professional use
Product Overview
Image: The Pro Co 10 Feet Premium Canare AES EBU Cable, showcasing its blue jacket and black Neutrik XLR male (left) and female (right) connectors. The male connector features three gold pins, while the female connector has three corresponding receptacles.
Setup and Connection
This cable is designed for straightforward connection between compatible digital audio devices. Follow these steps for proper setup:
- Identify Connectors: The cable features one XLR male connector (with pins) and one XLR female connector (with receptacles).
- Connect to Source: Plug the XLR male connector into the digital audio output of your source device (e.g., audio interface, digital audio workstation, mixing console). Ensure it clicks securely into place.
- Connect to Destination: Plug the XLR female connector into the digital audio input of your destination device (e.g., another audio interface, digital mixer, or professional audio equipment). Ensure a firm connection.
- Secure Connections: Verify that both connectors are fully seated and locked to prevent accidental disconnections during operation.
Always ensure that the devices you are connecting are powered off before making or breaking connections to prevent potential damage to equipment.
Operating Considerations
The Pro Co Canare AES EBU Cable is a passive component and does not require specific operational procedures beyond proper connection. However, consider the following for optimal performance:
- Signal Integrity: This cable is specifically designed for AES/EBU digital audio signals. Using it for analog audio or other signal types may result in suboptimal performance or signal degradation.
- Cable Management: Route cables neatly to avoid tangles, kinks, or excessive bending, which can stress the cable and connectors.
- Environmental Factors: While suitable for indoor and outdoor use, avoid exposing the cable to extreme temperatures, direct sunlight for prolonged periods, or harsh chemicals.
Maintenance and Care
Proper care will extend the lifespan and maintain the performance of your Pro Co Canare AES EBU Cable:
- Cleaning: Use a soft, dry cloth to wipe down the cable jacket and connectors. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, coil the cable loosely in a figure-eight pattern to prevent kinks and preserve the internal wiring. Store in a cool, dry place away from direct sunlight.
- Handling: Always pull by the connector housing, not the cable itself, when disconnecting. This prevents strain on the cable-to-connector joint.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, damage, or corrosion.
Troubleshooting
If you experience issues with your Pro Co Canare AES EBU Cable, consider the following common troubleshooting steps:
- No Signal/Intermittent Signal:
- Ensure both ends of the cable are securely connected to the appropriate input/output ports.
- Verify that the connected devices are powered on and configured correctly for digital audio input/output.
- Test the cable with another known working device or substitute with a different cable to isolate the issue.
- Check for any visible damage to the cable jacket or connectors.
- Digital Noise/Glitches:
- Ensure the cable is not running parallel to power cables or other sources of electromagnetic interference.
- Verify that the sample rates and clocking are correctly synchronized between the connected digital audio devices.
- Inspect connectors for dirt or debris that might be interfering with the connection.
If problems persist, contact Pro Co customer support or refer to the warranty information.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | Pro Co Canare AES EBU 10FT |
| Brand | Proco |
| Cable Type | AES/EBU Digital Audio Cable |
| Connector Type | XLR Male to XLR Female |
| Length | 10 Feet (approx. 3.05 meters) |
| Wire Material | Canare DA202 |
| Connector Material | Neutrik Gold Connectors |
| Number of Pins | 3 |
| Color | Black |
| Item Weight | 8.2 ounces (approx. 0.23 kg) |
| Product Dimensions | 9.3 x 5.6 x 1 inches (approx. 23.6 x 14.2 x 2.5 cm) |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| UPC | 703272106097 |
| Date First Available | March 27, 2013 |
Warranty and Support
The Pro Co 10 Feet Premium Canare AES EBU Cable is backed by Pro Co's exclusive lifetime warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further inquiries, please contact Pro Co customer service through their official website or authorized distributors. Keep your purchase receipt as proof of purchase.
