SEACHOICE 02851 LED Pole Light - 4" Instruction Manual
Model: 02851
Introduction
This manual provides essential instructions for the proper installation, operation, and maintenance of your SEACHOICE 02851 LED Pole Light. Designed for marine applications, this 4-inch LED pole light serves as a reliable navigation light, ensuring visibility and safety on the water. Please read these instructions thoroughly before installation and retain this manual for future reference.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your LED pole light. This light is designed to be waterproof, making it suitable for marine environments.
- Choose a Mounting Location: Select a flat, stable surface on your vessel that provides an unobstructed view for the light, adhering to local and international navigation light regulations.
- Prepare the Surface: Ensure the mounting surface is clean, dry, and free from debris.
- Mark Drilling Points: Use the light's base as a template to mark the positions for drilling pilot holes.
- Drill Pilot Holes: Carefully drill pilot holes appropriate for your mounting hardware. Avoid drilling through any existing wiring or structural components.
- Secure the Base: Attach the light's base securely to the mounting surface using appropriate marine-grade fasteners (not included). Ensure a tight fit to prevent water ingress.
- Electrical Connection:
- Identify the positive (+) and negative (-) wires from the light.
- Connect the light's positive wire to a switched 12V DC power source on your vessel, preferably through a fuse or circuit breaker.
- Connect the light's negative wire to a suitable ground point on your vessel.
- Ensure all electrical connections are secure, insulated, and protected from moisture using marine-grade connectors and heat shrink tubing.
- Test Functionality: Once installed and wired, activate the power source to verify the light illuminates correctly.
Figure 1: The SEACHOICE 02851 LED Pole Light. This image displays the complete unit, featuring a sturdy black mounting base with pre-drilled holes for secure attachment, a silver-colored vertical pole, and a clear, ribbed LED light housing topped with a black cap. The light is designed for marine navigation.
Operating Instructions
The SEACHOICE 02851 LED Pole Light is designed for straightforward operation.
- Activation: Turn on the designated switch on your vessel's electrical panel that controls the navigation lights. The LED pole light should illuminate instantly.
- Deactivation: Turn off the designated switch to extinguish the light.
- Purpose: This light is intended to provide 360-degree visibility as an all-round navigation light, crucial for safe boating during periods of reduced visibility or at night. Always ensure the light is operational when required by maritime regulations.
Maintenance
Regular maintenance will help preserve the performance and appearance of your LED pole light.
- Cleaning: Periodically clean the clear lens with fresh water and a soft cloth to remove salt spray, dirt, and grime. Avoid abrasive cleaners or solvents that could damage the lens material.
- Inspection: Regularly inspect the mounting hardware and electrical connections for corrosion, looseness, or damage. Tighten any loose fasteners and replace corroded components as necessary.
- LED Lifespan: The integrated LED light source has a long operational life and does not require bulb replacement under normal conditions.
Troubleshooting
If your SEACHOICE 02851 LED Pole Light is not functioning as expected, perform the following checks:
- Light Does Not Illuminate:
- Check Power Source: Ensure the vessel's battery has sufficient charge and the main power switch for navigation lights is in the "ON" position.
- Inspect Wiring: Verify all electrical connections are secure and free from corrosion. Check for any cut or damaged wires.
- Check Fuse/Circuit Breaker: Locate the fuse or circuit breaker protecting the navigation light circuit and ensure it is not blown or tripped. Replace a blown fuse with one of the same rating.
- Dim or Flickering Light:
- Voltage Drop: Check for excessive voltage drop in the wiring. Ensure wire gauge is appropriate for the length of the run.
- Corroded Connections: Clean any corroded terminals or connectors.
If these steps do not resolve the issue, contact SEACHOICE customer support for further assistance.
Specifications
| Brand | SEACHOICE |
| Model Number | 02851 |
| Type | LED Pole Light / Navigation Light |
| Height | 4 inches |
| Special Feature | Waterproof |
| Lens Color | Clear |
| Vehicle Service Type | Car (Note: Primarily for marine applications, as per product category) |
Support and Contact Information
For technical assistance, replacement parts, or further inquiries regarding your SEACHOICE 02851 LED Pole Light, please contact SEACHOICE customer support.
Refer to the official SEACHOICE website or product packaging for the most current contact details.
Website: Visit the SEACHOICE Store on Amazon
