GEORGE KOVACS P4308-647

Download PDF
Contents

GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp

Instruction Manual

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp. Please read these instructions thoroughly before beginning installation and retain them for future reference.

The P4308-647 is a contemporary LED swing arm wall lamp designed for indoor use, featuring an integrated dimmable LED module and a copper bronze patina finish.

Safety Information

  • WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
  • All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
  • This fixture is intended for indoor use only. Do not expose to water or moisture.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not attempt to modify the LED module or any electrical components. The LED module is integrated and not user-replaceable.
  • Clean the fixture only with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

Package Contents

Verify that all components are present before beginning installation:

  • LED Swing Arm Wall Lamp Fixture (P4308-647)
  • Mounting Hardware (screws, wire nuts, mounting plate)
  • Integrated LED Module

Setup and Installation

This wall lamp is designed for wall mount installation and includes hardware to mount the fixture to an existing junction box (junction box not included). The lamp operates via a corded electric power source with a US-style plug.

  1. Prepare for Installation: Turn off the electrical power at the main fuse box or circuit breaker. Ensure the power is off before proceeding.
  2. Mounting Plate Installation: Attach the mounting plate to the existing junction box using the provided screws. Ensure the plate is securely fastened.
  3. Electrical Connections: Connect the fixture's electrical wires to the corresponding wires from the junction box. Typically, connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts.
  4. Secure the Fixture: Carefully align the lamp fixture with the mounting plate and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
  5. Plug In: Once the fixture is securely mounted and wired, plug the power cord into a standard US electrical outlet.
  6. Restore Power: Turn the electrical power back on at the main fuse box or circuit breaker.
Close-up of the GEORGE KOVACS P4308-647 wall plate with dimming button and power cord.

Image: Wall plate of the P4308-647 lamp, showing the integrated dimming button and the power cord extending downwards. This view highlights the control interface and power connection point.

GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp installed next to a bed with a dark headboard.

Image: The P4308-647 lamp mounted on a wall, positioned beside a bed with a dark upholstered headboard. The swing arm is extended, and the LED light is illuminated, demonstrating its functional placement in a reading environment.

Operating Instructions

The P4308-647 lamp features an integrated push-button control for power and dimming, located on the wall plate.

  • Turning On/Off: Tap the circular button on the wall plate to turn the lamp on or off.
  • Dimming: To adjust brightness, press and hold the circular button. The light will cycle through its brightness levels (from brightest to dimmest and back again). Release the button when the desired brightness is reached. The lamp will remember the last brightness setting when turned off and on again.
  • Adjusting the Arm: The swing arm allows for flexible positioning of the light. Gently move the arm to direct the light as needed.
Close-up of the GEORGE KOVACS P4308-647 LED lamp head and swing arm mechanism.

Image: Detailed view of the P4308-647 lamp's LED head and the articulation points of its swing arm. This image highlights the design and adjustability of the light source.

Maintenance

The GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp requires minimal maintenance.

  • Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish or electrical components.
  • LED Module: The LED module is integrated and designed for long-term use. It is not user-replaceable. If the LED module fails, contact customer support for assistance.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not light up.No power to the fixture; loose wiring; faulty outlet.
  • Check if the circuit breaker is tripped or if the fuse is blown.
  • Ensure the lamp is properly plugged into a working outlet.
  • Verify all electrical connections are secure (only if comfortable and power is disconnected).
Light flickers or dims unexpectedly.Unstable power supply; loose connection; incompatible dimmer (not applicable for integrated dimmer).
  • Ensure the power cord is fully inserted into the outlet.
  • Check for any loose connections at the wall plate (with power off).
  • If the issue persists, contact customer support.
Lamp does not respond to button presses.No power; internal component issue.
  • Confirm power is supplied to the fixture.
  • If power is present and the lamp still does not respond, contact customer support.

Specifications

FeatureDetail
Model NumberP4308-647
BrandGEORGE KOVACS
Dimensions (L x W x H)6.25" x 13.75" x 22.5"
Weight2.71 pounds
MaterialAlloy Steel, Aluminum, Brass
FinishCopper Bronze Patina
Light Source TypeIntegrated LED Module
Wattage8 Watts (Total)
Voltage120 Volts
Light Color Temperature3000K (Warm White)
CRI84
Lumens438.76
Special FeatureDimmable
Control MethodPush Button (Integrated)
Indoor/Outdoor UsageIndoor
CertificationETL Certified
Power SourceCorded Electric (US Style Plug)

Warranty Information

This GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty claims, or questions regarding your GEORGE KOVACS P4308-647 LED Swing Arm Wall Lamp, please contact the manufacturer or your retailer.

For more information, you may visit the GEORGE KOVACS Store on Amazon.

© 2024 GEORGE KOVACS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.