Anchor 701951 Strut Mount User Manual

Introduction

Thank you for choosing the Anchor 701951 Strut Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new strut mount. Please read this manual thoroughly before beginning any installation to ensure proper function and longevity of the product.

The Anchor 701951 Strut Mount is a critical component in your vehicle's suspension system, designed to provide a secure mounting point for the strut assembly to the vehicle's chassis. It helps to absorb road shock, reduce noise, and maintain proper wheel alignment, contributing to a smoother and safer ride.

Safety Information

WARNING: Improper installation of suspension components can lead to serious injury or death. If you are not experienced with automotive repair, it is highly recommended to seek professional assistance.

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when working on your vehicle.
• Ensure the vehicle is securely supported on jack stands on a level surface before beginning any work. Never rely solely on a jack.
• Use the correct tools for the job.
• Be aware of potential hazards such as compressed springs, hot engine components, and sharp edges.
• Refer to your vehicle's specific service manual for detailed instructions and torque specifications.
• Do not modify the strut mount or any related components.

Package Contents

Image: The Anchor 701951 Strut Mount kit. This image displays the main strut mount assembly, which is a black rubber and metal component with two threaded studs protruding from its base. Also visible are two hexagonal nuts and two black conical washers, all essential for securing the strut mount in place.

• 1x Anchor 701951 Strut Mount Assembly
• 2x Mounting Nuts
• 2x Conical Washers

Setup and Installation

This section provides general guidelines for installing the Anchor 701951 Strut Mount. Specific steps may vary depending on your vehicle's make and model. Always consult your vehicle's service manual for precise instructions and torque specifications.

1. Prepare the Vehicle: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Loosen the lug nuts on the wheel corresponding to the strut being replaced.
2. Lift and Secure: Safely lift the vehicle using a floor jack and support it with jack stands. Remove the wheel.
3. Access the Strut: Locate the strut assembly. You may need to remove brake lines, ABS sensor wires, or sway bar links that are attached to the strut.
4. Compress the Spring (if necessary): If replacing the entire strut assembly, or if the spring is being reused, use a spring compressor to safely compress the coil spring before removing the top nut of the strut. Extreme caution is advised as compressed springs store significant energy.
5. Remove Old Strut Mount: Once the spring is safely compressed (or if replacing the entire assembly), remove the nuts securing the old strut mount to the vehicle's chassis. Carefully lower the strut assembly from the vehicle.
6. Disassemble Strut (if reusing spring): If reusing the coil spring, carefully remove the top nut from the strut shaft, then remove the old strut mount, bearing, and any washers. Note the order of components.
7. Install New Strut Mount: Place the new Anchor 701951 Strut Mount onto the strut shaft, ensuring all components (like the bearing, if separate) are in the correct orientation. Secure with the provided nuts and conical washers.
8. Reinstall Strut Assembly: Carefully guide the strut assembly back into its position in the vehicle's wheel well. Secure the top of the strut mount to the chassis with the appropriate nuts, tightening to vehicle manufacturer's specifications.
9. Reconnect Components: Reattach any brake lines, ABS sensor wires, or sway bar links that were disconnected.
10. Final Steps: Reinstall the wheel, lower the vehicle, and torque the lug nuts to specification. It is highly recommended to have a professional alignment performed after replacing suspension components.

Operation (Function)

The Anchor 701951 Strut Mount serves several critical functions within your vehicle's suspension system:

• Mounting Point: Provides a secure attachment point for the top of the strut assembly to the vehicle's body or frame.
• Noise and Vibration Isolation: The rubber components within the mount help to absorb road noise and vibrations, preventing them from being transmitted into the vehicle's cabin.
• Steering Pivot (if applicable): In many designs, the strut mount incorporates a bearing that allows the strut to pivot smoothly with the steering knuckle, facilitating steering movements.
• Suspension Travel: Allows for the necessary vertical movement of the strut assembly as the suspension compresses and extends over bumps and dips.

Once installed, the strut mount operates continuously as part of the suspension system, contributing to ride comfort, handling, and vehicle stability.

Maintenance

Strut mounts are wear items and do not typically require routine maintenance. However, periodic inspection is recommended as part of your vehicle's overall suspension check-up.

• Visual Inspection: During tire rotations or other undercarriage inspections, visually check the strut mounts for signs of wear, such as cracking or tearing of the rubber, excessive rust, or looseness.
• Noise Check: Listen for unusual noises (e.g., clunking, popping, creaking) coming from the top of the strut tower, especially when going over bumps or turning. These can indicate a worn strut mount.
• Alignment: If you notice uneven tire wear or a change in steering feel, it could be related to suspension components, including the strut mounts. A professional alignment can help diagnose issues.

If a strut mount shows signs of significant wear or damage, it should be replaced promptly to maintain vehicle safety and performance. It is often recommended to replace strut mounts in pairs (both front or both rear) to ensure balanced suspension performance.

Troubleshooting

If you are unable to diagnose or resolve an issue, it is recommended to consult a qualified automotive technician.

Specifications

• Brand: Anchor
• Model Number: 701951
• Manufacturer Part Number: 701951
• Material: Steel
• Item Weight: 6.18 pounds (2.80 kg)
• Product Dimensions (L x W x H): 3.31 x 3.61 x 2.45 inches (8.41 x 9.17 x 6.22 cm)
• UPC: 081106719515
• ASIN: B0080D0VTE

Contact and Support

For further assistance or technical support regarding your Anchor 701951 Strut Mount, please contact Anchor customer service or visit their official website. Always provide your product model number (701951) when seeking support.

Manufacturer: Anchor
Website: www.anchor-automotive.com (Example link, actual link may vary)