Product Overview
This manual provides essential information for the safe and effective use of your Satco S3623 12V SC Bayonet Base 12-Watt S8 Light Bulb. Please read these instructions carefully before installation and retain them for future reference.
Image 1: The Satco S3623 12V SC Bayonet Base 12-Watt S8 Light Bulb. This is a clear, incandescent bulb with a single contact bayonet base.
The Satco S3623 is a miniature S8 incandescent light bulb designed for 12-volt applications. It features a Bayonet Single Contact (BA15S) base and provides 12 watts of illumination with an average rated life of 700 hours. Its clear finish ensures full light output.
Setup and Installation
- Safety First: Ensure the power supply to the fixture is turned OFF before attempting to install or replace the bulb. This prevents electrical shock.
- Verify Compatibility: Confirm that your light fixture is designed for a 12-volt power supply and accepts a BA15S (Single Contact Bayonet) base bulb. Using an incompatible bulb or voltage can cause damage or malfunction.
- Handle with Care: Hold the bulb by its glass envelope, avoiding contact with the metal base if possible, to prevent transferring oils from your skin, which can shorten bulb life.
- Insert the Bulb: Align the two pins on the bulb's base with the slots in the fixture's socket. Push the bulb gently into the socket and twist it clockwise until it locks into place. Do not force the bulb.
- Secure Connection: Ensure the bulb is firmly seated in the socket to establish proper electrical contact.
- Restore Power: Once the bulb is securely installed, turn the power supply back ON.
Image 2: The Satco S3623 bulb shown in hand, illustrating its compact size for proper handling during installation.
Operation
The Satco S3623 light bulb operates immediately upon receiving power. Simply activate the switch or control connected to your fixture to turn the light on or off.
- Intended Use: This bulb is designed for indoor use in appropriate 12-volt fixtures.
- Dimming: This incandescent bulb is generally compatible with standard incandescent dimmers, but always verify the dimmer's specifications and the fixture's requirements.
Maintenance
- Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Replace the bulb when it burns out. Follow the installation steps outlined above, ensuring power is off before handling.
- Disposal: Dispose of used incandescent bulbs according to local regulations.
Troubleshooting
- Bulb Does Not Light:
- Check if the power to the fixture is on.
- Ensure the bulb is securely seated in the socket.
- Verify that the bulb is not burned out by testing it in a known working fixture or replacing it with a new bulb.
- Confirm the fixture's voltage and base type match the bulb's specifications.
- Bulb Flickers:
- Check for a loose connection in the socket.
- Ensure the fixture's voltage is stable and matches the bulb's requirements.
- If using a dimmer, ensure it is compatible with incandescent bulbs and functioning correctly.
Specifications
| Attribute | Value |
|---|---|
| Brand | Satco |
| Model Number | S3623 |
| Light Type | Incandescent |
| Wattage | 12 Watts |
| Voltage | 12 Volts |
| Bulb Shape Size | S8 |
| Bulb Base | BA15S (Bayonet Single Contact) |
| Brightness | 190 Lumens |
| Average Rated Hours | 700 Hours |
| Finish | Clear |
| Material | Glass |
| Dimensions (L x W) | 1.44 inches x 1.00 inch |
| Item Weight | 0.48 ounces (13.61 g) |
| Indoor/Outdoor Usage | Indoor |
Warranty Information
This Satco S3623 light bulb comes with a limited warranty based on its average rated hours. For specific warranty terms and conditions, please refer to the packaging or contact Satco customer support.
Customer Support
For further assistance, technical support, or inquiries regarding your Satco S3623 light bulb, please contact Satco customer service. Visit the official Satco website for contact details or refer to the product packaging.
Satco Website: www.satco.com