Introduction
The Bose Wave® Music System III is an advanced audio system designed to deliver rich, room-filling sound from a compact unit. This manual provides detailed instructions for setting up, operating, and maintaining your system, ensuring optimal performance and longevity.
Image: The Bose Wave Music System III in Titanium Silver, shown with its remote control and a CD. The system features a sleek design with a digital display.
What's Included
Upon unpacking your Bose Wave Music System III, please verify that all the following components are present:
- Wave music system III unit
- AC power cord
- Remote control
- Demonstration CD
Initial Setup
1. Unpacking
Carefully remove all components from the packaging. Retain the packaging materials for future transport or storage.
2. Power Connection
Connect the AC power cord to the AC power input on the back of the Wave music system III, then plug the other end into a wall outlet. The system will automatically power on and display the time.
3. Antenna Connection
For optimal FM/AM radio reception, ensure the included FM antenna is fully extended and positioned away from other electronic devices. Connect it to the FM antenna jack on the rear of the system. For AM, the internal antenna is usually sufficient, but an external AM antenna can be connected if needed.
4. Auxiliary Input Connection
To connect an external audio device (e.g., MP3 player, smartphone) to your Wave music system III, use a 3.5 mm (1/8") audio cable (not included). Plug one end into the AUX IN jack on the back of the system and the other end into the headphone or line-out jack of your external device.
Operating Your System
Basic Controls
The Wave music system III can be controlled using the touch-top surface or the provided remote control.
- Touch-Top Controls: Gently tap the top of the system to power on/off or to snooze an alarm.
- Remote Control: Use the remote for full functionality, including power, volume, source selection, tuning, and alarm settings.
Image: The remote control for the Bose Wave Music System III, featuring buttons for power, volume, source selection, and radio tuning.
CD Player Operation
- Insert a CD or MP3 CD into the slot on the front of the system. The system will automatically switch to CD mode and begin playback.
- Use the Play/Pause, Stop, Skip Track, and Fast Forward/Rewind buttons on the remote control to manage playback.
FM/AM Radio Operation
- Press the FM/AM button on the remote to select the desired radio band.
- Use the Tune/Seek buttons to manually tune or automatically seek for stations.
- The display will show station frequency and, for compatible FM stations, useful information like song titles and artists.
- To save a station as a preset, press and hold a numbered preset button on the remote.
Setting Alarms
The system features dual independent alarms.
- Press the Alarm Setup button on the remote.
- Follow the on-screen prompts to set the alarm time, source (radio or CD), and volume.
- To snooze an active alarm, gently tap the top of the system.
Using Auxiliary Devices
After connecting an external device to the AUX IN jack, press the AUX button on the remote control to switch the system's audio source to the auxiliary input.
Bluetooth Connectivity (with optional accessory)
To stream audio wirelessly via Bluetooth, an optional Bose Bluetooth adapter is required (sold separately). Once connected, pair your Bluetooth-enabled device with the adapter according to the adapter's instructions.
Care and Maintenance
Cleaning the System
Wipe the surface of the Wave music system III with a soft, dry cloth. Do not use any liquids or sprays directly on the unit. Avoid using abrasive cleaners or solvents.
CD Player Care
Handle CDs by their edges to avoid fingerprints and scratches. Keep the CD slot free from dust and debris. Do not insert damaged or irregularly shaped discs into the player.
Troubleshooting Guide
If you encounter issues with your Wave music system III, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not securely connected. | Ensure the AC power cord is firmly plugged into both the system and a working wall outlet. |
| No sound | Volume is too low or muted. Incorrect source selected. | Increase volume. Press the appropriate source button (CD, FM/AM, AUX) on the remote. |
| CD not playing | CD inserted incorrectly or is damaged. | Ensure the CD is inserted label-side up. Try a different, clean CD. |
| Poor radio reception | Antenna not properly positioned. Interference from other electronics. | Adjust the FM antenna for better reception. Move the system away from other electronic devices. |
| Remote control not working | Battery depleted. Obstruction between remote and system. | Replace the CR2 battery in the remote. Ensure a clear line of sight to the system. |
Product Specifications
- Model Number: 343178-1310
- Brand: Bose
- Dimensions (L x W x H): 18.75 x 12.5 x 6.5 inches
- Item Weight: 9.77 pounds
- Color: Titanium Silver
- Speaker Type: Stereo
- Connectivity Technology: Auxiliary (Bluetooth with optional accessory)
- Power: AC (specific voltage not provided, assume standard)
- Remote Battery: 1 CR2 battery (included)
Warranty and Support
Bose products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Bose website.
For technical assistance, product registration, or to purchase accessories, please visit the official Bose support page or contact Bose customer service.
