Introduction
Welcome to your new Keter Store It Out Midi storage shed. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product. Please read this manual thoroughly before using the product.
Safety Information
Important: Please read all safety warnings and instructions carefully before assembly and use.
- The product is resistant to weather agents, except for the most extreme climatic events. Ensure the shed is placed on a level, stable surface to prevent tipping or structural damage.
- Do not allow children to play inside the shed unsupervised.
- Do not store flammable liquids or hazardous materials inside the shed.
- Ensure proper ventilation to prevent moisture buildup, especially if storing items sensitive to humidity.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer service.
- All necessary panels for the storage shed structure (walls, doors, roof)
- Floor panels
- Hardware (screws, bolts, connectors)
- Assembly instructions manual
Assembly Instructions
The Keter Store It Out Midi is designed for straightforward assembly with standard tools. It is recommended to have a power screwdriver for easier installation, as some holes may not be pre-drilled. Carefully read the assembly instructions and ensure no parts are missing or damaged before assembling the product.
- Preparation: Choose a flat, level, and stable surface for assembly. Lay out all components and identify them using the provided parts list in the separate assembly manual.
- Base Assembly: Assemble the base frame and attach the floor panels. Ensure the base is stable and square before proceeding.
- Wall Panel Installation: Attach the side and back wall panels to the base. Secure them firmly according to the detailed steps in the assembly manual.
- Door Frame and Door Installation: Install the door frame components, then attach the doors. Ensure they swing freely and align correctly for proper closure.
- Roof Assembly: Attach the roof panels. Ensure they are securely fastened and provide proper weather protection.
- Final Checks: Verify all connections are tight and the shed is stable. Test the door and locking mechanism for smooth operation.
For detailed step-by-step instructions and diagrams, refer to the dedicated assembly manual included in the product package.
Product Features
The Keter Store It Out Midi storage shed offers a range of features designed for convenience and durability:
- Durable resin construction with an attractive wood-effect finish, blending seamlessly into garden aesthetics.
- Internal honeycomb structure providing prolonged resistance and stability over time.
- Integrated ventilation holes to ensure proper air circulation and prevent moisture buildup.
- Includes a robust floor panel to keep stored contents dry and clean, protecting them from ground moisture.
- Features a lockable closure system for enhanced security (padlock not included).
- Equipped with integrated internal supports, allowing for the organization of internal space with shelves (shelves sold separately).
- Made from weather-resistant plastic resin, ensuring the shed requires minimal maintenance and withstands outdoor elements.
- External dimensions: 132 cm (W) x 71.5 cm (D) x 113.5 cm (H).
Operation
Opening and Closing: The shed features a dual-door system and a lift-up lid. To open, unlock the doors (if a padlock is used) and pull them outwards. The lid can be lifted for top access, which is particularly useful for quick access or for storing taller items.
Storage: Utilize the spacious interior for a variety of items such as garden tools, outdoor equipment, cushions, or waste bins. The integrated supports allow for the addition of shelves (sold separately) to optimize vertical storage and organization.
Security: The shed is designed with a lockable mechanism. For enhanced security, a standard padlock can be attached to the central latch. Ensure the doors and lid are fully closed and aligned before attempting to lock.
Maintenance
The Keter Store It Out Midi is made from durable, weather-resistant resin and requires minimal maintenance to keep it in excellent condition.
- Cleaning: Clean the shed periodically with mild soap and water. Use a soft cloth or sponge. Avoid abrasive cleaners, harsh chemicals, or stiff brushes that could scratch or damage the resin surface. Rinse thoroughly with clean water.
- Inspection: Regularly inspect the shed for any signs of wear, damage, or loose components, especially after extreme weather conditions. Tighten any loose screws if necessary.
- Ventilation: Ensure the ventilation holes remain clear of debris to prevent moisture buildup and maintain air circulation inside the shed.
- Winter Care: While weather-resistant, in areas with heavy snowfall, it is advisable to clear snow from the roof to prevent excessive weight accumulation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not close properly | Uneven ground; Misaligned panels; Obstruction | Ensure the shed is on a perfectly level and stable surface. Recheck panel alignment and adjust if necessary. Remove any debris or items obstructing the door path. |
| Water inside the shed | Improper assembly; Extreme weather; Blocked ventilation | Verify all panels and the roof are securely fastened and sealed. While weather-resistant, extreme conditions may allow some moisture. Ensure ventilation holes are clear. Check for cracks or damage. |
| Difficulty with locking mechanism | Misalignment of doors/lid; Latch obstruction | Gently push down on the lid or adjust the doors to align the latch correctly. Ensure no debris is blocking the latch mechanism. |
| Shed feels unstable | Uneven ground; Loose connections | Relocate the shed to a firm, level surface. Re-tighten all screws and connections according to the assembly manual. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Keter |
| Model Number | 17197253 |
| Material | Weather-resistant plastic resin |
| Color | Midi Beige |
| External Dimensions (LxWxH) | 132 cm x 71.5 cm x 113.5 cm (52" x 28" x 44.7") |
| Item Weight | 19.9 kg (43.87 lbs) |
| Package Dimensions | 132.5 cm x 79 cm x 23.5 cm |
| Country of Origin | Israel |
| First Available Date | March 17, 2013 |
Warranty and Support
For detailed warranty information and customer support, please refer to the documentation provided with your purchase. You can also visit the official Keter website for FAQs, product registration, and direct support:
For any further assistance or inquiries, please contact Keter customer service through the contact details provided on their website.
