Introduction
Thank you for choosing the Lexon Cubissimo LR79W1 LCD Alarm Clock. This compact and stylish alarm clock features a unique cube design with four distinct LCD displays, providing essential information at a glance. It is crafted from injected ABS and aluminum, ensuring durability and a modern aesthetic. This manual provides detailed instructions for setting up, operating, and maintaining your device.
The Lexon Cubissimo LR79W1 alarm clock in white, showcasing its compact cube design and clear LCD display for time and day.
Key Features:
- Four LCD displays for comprehensive information.
- Electroluminescent display for clear visibility.
- Displays time, date, day, and temperature (Celsius or Fahrenheit).
- Alarm function with snooze.
- Integrated light function.
- Compact dimensions: 5.1 x 5.1 x 5.1 cm.
- Durable injected ABS and aluminum construction.
Setup
To begin using your Lexon Cubissimo LR79W1, you will need to install the batteries.
Battery Installation:
- Gently lift the top lid of the alarm clock to reveal the control buttons and the battery compartment.
- Insert two (2) AAA batteries into the battery compartment, ensuring correct polarity (+/-).
- Close the top lid securely.
The clock will power on automatically once batteries are installed. If the display does not light up, check the battery orientation or replace with fresh batteries.
This image shows the top of the Lexon Cubissimo LR79W1 alarm clock with its protective lid lifted, exposing the control buttons used for setting time, date, and alarm, as well as the battery compartment.
Operating Instructions
The Lexon Cubissimo LR79W1 features intuitive controls located under the top lid. Familiarize yourself with the buttons (typically MODE, SET, UP, DOWN) for optimal use.
Setting Time and Date:
- Lift the top lid.
- Press the MODE button repeatedly until the time display starts flashing.
- Use the UP and DOWN buttons to adjust the hour. Press SET to confirm and move to minutes.
- Repeat for minutes, year, month, and day.
- Press MODE to exit setting mode.
Setting the Alarm:
- Lift the top lid.
- Press the MODE button until the alarm time display starts flashing (often indicated by an alarm icon).
- Use the UP and DOWN buttons to set the desired alarm hour. Press SET to confirm and move to minutes.
- Repeat for alarm minutes.
- Press MODE to exit setting mode.
- To activate/deactivate the alarm, locate the dedicated alarm ON/OFF switch or button (refer to the markings near the control buttons).
Snooze and Backlight Function:
- When the alarm sounds, press the top surface of the clock (or the designated snooze button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes.
- To illuminate the display with the electroluminescent backlight, gently press the top surface of the clock. The light will remain on for a few seconds.
The Lexon Cubissimo LR79W1 alarm clock with its electroluminescent display activated, showing the time and day with a clear blue backlight for visibility in low light conditions.
Temperature Display:
The clock displays the ambient temperature. To switch between Celsius (°C) and Fahrenheit (°F), locate the C/°F button (often near the battery compartment or other control buttons) and press it.
Maintenance
Proper care will ensure the longevity and optimal performance of your Lexon Cubissimo LR79W1 alarm clock.
Cleaning:
- Wipe the exterior of the clock with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
Battery Replacement:
- When the display dims or functions become erratic, it is time to replace the batteries.
- Follow the battery installation steps outlined in the Setup section.
- Dispose of used batteries responsibly according to local regulations.
Troubleshooting
If you encounter issues with your Lexon Cubissimo LR79W1, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead batteries; incorrect battery installation. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not activated; alarm volume is too low (if adjustable); incorrect alarm time set. | Ensure the alarm is switched ON. Verify the alarm time setting. (Note: This model may have a fixed alarm volume). |
| Time or date is incorrect. | Time/date not set correctly; batteries removed/replaced without resetting. | Follow the instructions in the Operating Instructions section to reset the time and date. |
| Backlight is not working. | Low batteries; faulty unit. | Replace batteries. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Lexon |
| Model Number | LR79W1 |
| Color | White |
| Display Type | Digital, Multiple Display, Electroluminescent |
| Special Features | Temperature Display, Alarm, Snooze, Backlight |
| Product Dimensions | 5.1l x 5.1H centimeters (approximately 2 x 2 x 2 inches) |
| Power Source | Battery Powered |
| Shape | Square |
| Indoor/Outdoor Use | Indoor |
| Material | Injected ABS / Aluminum |
| Batteries Required | 2 AAA batteries (not included) |
| Mounting Type | Tabletop |
| Clock Movement Type | Quartz |
Warranty Information
The Lexon Cubissimo LR79W1 LCD Alarm Clock comes with a manufacturer's warranty.
- Warranty Period: 2 years from the date of purchase.
- This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
- Please retain your proof of purchase for warranty claims.
Support
For further assistance, product inquiries, or warranty claims, please contact Lexon customer support or visit their official website.
- Online Support: Visit the official Lexon website for FAQs, product registration, and contact information.
- Lexon Brand Store: You can also visit the Lexon Brand Store on Amazon for more products and information.