1. Introduction
The Graco TurboBooster Backless Booster Car Seat is designed to provide safety and comfort for older children in a vehicle. This booster seat is suitable for children weighing between 40 and 100 pounds and measuring 43 to 57 inches tall. It serves as a belt-positioning booster for children transitioning out of a harness booster.
Key features include:
- Padded seat for comfort.
- Height-adjustable armrests to accommodate growing children.
- Dual, hideaway cup holders for convenience.
- Removable, machine-washable seat cushion for easy cleaning.
- Engineered and crash-tested to meet or exceed US safety standards (FMVSS 213).
- Graco Protect Plus Engineered for protection in frontal, rear, and rollover crashes, with additional testing based on the New Car Assessment Program and for extreme car interior temperatures.
2. Setup
Before using the Graco TurboBooster Backless Booster Car Seat, ensure all components are correctly assembled and adjusted for your child's size.
2.1 Attaching Armrests
The armrests are designed to be inserted into the base of the booster seat. Align the posts of each armrest with the corresponding slots on the booster seat base. Push down firmly until the buttons on the armrests snap securely into place. Verify that both armrests are firmly attached by gently pulling upwards on them.
Image 1: Graco TurboBooster Backless Booster Car Seat with armrests and cup holders.
2.2 Adjusting Armrest Height
The armrests are height-adjustable to provide optimal comfort for your child. To adjust the height, locate the adjustment mechanism on the side of each armrest. Press the button or release the lever (refer to the specific mechanism on your model) and slide the armrest up or down to the desired height. Ensure it locks securely into position before use.
2.3 Deploying/Storing Cup Holders
The booster seat features dual hideaway cup holders. To deploy a cup holder, pull it outwards from the side of the seat until it clicks into place. To store it, push it back inwards until it is flush with the seat's side. These are designed to keep drinks and small snacks within easy reach for your child.
Video 1: Demonstration of the Graco TurboBooster Backless Booster Car Seat features, including cup holders and seat belt routing.
3. Operating the Booster Seat
Proper use of the booster seat is crucial for your child's safety. Always follow these steps when placing your child in the seat.
3.1 Placement in Vehicle
Place the Graco TurboBooster Backless Booster Car Seat on a vehicle seat that has a lap and shoulder belt. Ensure the booster seat is positioned flat and stable on the vehicle seat cushion.
Image 2: The booster seat correctly positioned in a car's back seat.
3.2 Securing Your Child
- Have your child sit comfortably in the booster seat, ensuring their back is against the vehicle seat back.
- Route the vehicle's lap belt under both armrests of the booster seat. The lap belt should lie low across your child's hips, touching the top of their thighs.
- Route the vehicle's shoulder belt through the red belt guide located on the side of the booster seat closest to the vehicle's shoulder belt. The shoulder belt should lie across the center of your child's chest and shoulder, not on their neck or face.
- Buckle the vehicle's seat belt. Pull the shoulder belt to remove any slack. The seat belt should fit snugly against your child.
Image 3: A child correctly seated and secured in the booster seat.
Important: Always ensure the vehicle's seat belt is properly routed and snug. Never use only the lap belt with this booster seat.
4. Maintenance
Regular cleaning and maintenance will help prolong the life of your booster seat.
4.1 Cleaning the Seat Cushion
The deluxe padded seat cushion is removable and machine-washable. To clean, carefully remove the fabric cover from the booster seat. Machine wash the cover in cold water on a delicate cycle with mild detergent. Do not use bleach. Tumble dry on low heat or hang to dry. Do not iron.
4.2 Cleaning Plastic Parts
All plastic parts of the booster seat, including the base and armrests, may be spot cleaned with mild soap and cool water. Wipe dry with a soft cloth. Do not use abrasive cleaners or solvents.
5. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 15 x 16 x 8.5 inches |
| Item Model Number | 1823382 |
| Minimum Weight Recommendation | 40 Pounds |
| Maximum Weight Recommendation | 101 Pounds |
| Minimum Height Recommendation | 43 Inches |
| Maximum Height Recommendation | 57 Inches |
| Material Type | Polyester |
| Additional Product Features | Cup Holder |
| Style | TurboBooster Backless |
| Number of Reclining Positions | 2 |
| Orientation | Forward Facing |
| Harness Type | No harness |
| Item Weight | 5.1 pounds |
| Installation Type | Seat Belt |
| Color | Galaxy |
6. Troubleshooting
If you encounter any issues with your Graco TurboBooster Backless Booster Car Seat, please refer to the comprehensive user manual included with your product for detailed troubleshooting steps. For common issues, ensure the seat belt is correctly routed and tightened, and that the booster seat is stable on the vehicle seat. Always verify that your child meets the minimum and maximum weight and height requirements for safe use.
7. Warranty & Support
For warranty information, product registration, or to contact customer support, please refer to the official Graco website or the warranty card included with your purchase. Keep your proof of purchase for any warranty claims.
