Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Santos 37A 4LI Kitchen Blender. Please read it thoroughly before first use and retain it for future reference.
Image: The Santos 37A 4LI Kitchen Blender, featuring its robust black base and polished stainless steel jug, designed for commercial use.
Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before operating the blender.
- Do not immerse the motor base in water or other liquids.
- Ensure the lid is securely in place before operating.
- Keep hands and utensils out of the container while blending to prevent severe injury and/or damage to the blender.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- This appliance is intended for commercial use only.
Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Initial Cleaning: Before first use, wash the jug, lid, and any removable parts with warm soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp cloth.
- Placement: Place the blender on a stable, flat, and dry surface. Ensure adequate ventilation around the unit.
- Assembly: Place the jug securely onto the motor base. Ensure it is properly seated.
- Power Connection: Plug the power cord into a suitable grounded electrical outlet (220 Volts).
Operating Instructions
Basic Blending
- Prepare Ingredients: Cut ingredients into appropriate sizes for blending. Do not overfill the 4-liter jug.
- Load Jug: Place ingredients into the stainless steel jug. For best results, add liquids first, then soft ingredients, and finally harder ingredients or ice.
- Secure Lid: Place the lid firmly onto the jug. Ensure the lid is properly sealed to prevent spills during operation.
- Select Speed: Turn the speed control knob on the front panel to the desired setting. The blender offers variable speed control.
- Start Blending: Press the ON button to begin blending.
- Pulse Function: For short bursts of power or to chop ingredients, press and hold the "PULSE" button. Release to stop.
- Stop Blending: Press the OFF button or turn the speed control knob to the '0' position.
- Unload: Wait for the blades to completely stop before removing the lid and pouring out the contents.
Tips for Optimal Performance
- Do not blend extremely hot liquids, as pressure buildup can cause the lid to dislodge.
- For thick mixtures, use the pulse function to help move ingredients around.
- Avoid running the blender empty.
- The jug can be oriented into any position for convenience.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Santos blender.
- Unplug: Always unplug the blender from the power outlet before cleaning.
- Jug Cleaning: For quick cleaning, fill the jug halfway with warm water and a drop of dish soap. Secure the lid and run the blender on low speed for 30 seconds. Rinse thoroughly. For deeper cleaning, disassemble the jug components if possible and wash by hand.
- Motor Base: Wipe the motor base with a damp cloth. Do not immerse the motor base in water.
- Blades: Exercise extreme caution when cleaning the blades as they are very sharp. Use a brush if necessary.
- Storage: Store the blender in a clean, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not start. | Not plugged in; power switch off; jug not properly seated. | Ensure power cord is securely plugged in. Turn power switch ON. Re-seat the jug firmly on the base. |
| Motor runs, but blades do not spin. | Jug not properly engaged with the drive socket; ingredients jammed. | Ensure jug is correctly seated. Unplug, remove jug, clear any obstructions around blades. |
| Loud noise or vibration. | Overloaded; unstable surface; damaged coupling. | Reduce ingredient quantity. Place on a stable surface. Contact service if coupling is damaged. |
| Leaking from jug. | Lid not secure; jug seal damaged. | Ensure lid is firmly in place. Inspect jug seal for damage and replace if necessary. |
If the problem persists after attempting these solutions, please contact authorized service personnel.
Specifications
- Model: 37A 4LI
- Manufacturer: Nisbets
- Item Weight: 12.5 kg
- Package Dimensions: 61.5 x 30.3 x 22 cm
- Size: 566(H)x 220(W)x 303(D)mm
- Colour: Black
- Power Source: Corded Electric
- Voltage: 220 Volts
- Capacity: 4 litres
- Included Components: Juice Container
Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Santos dealer. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the official Santos website or contact their customer service department.
