Introduction
The Soehnle Style Sense Digital Personal Bathroom Scale, model 63332, is designed to provide accurate body weight measurements. This scale combines elegant design with advanced technology, ensuring reliable performance on various floor types. Its automatic on/off function and large, easy-to-read LCD display make it convenient for daily use. This manual provides essential information for the proper setup, operation, and maintenance of your scale.
Image: Front view of the Soehnle Style Sense Digital Personal Bathroom Scale 63332, showing the silver platform and digital display.
Safety Information
- Always place the scale on a firm, flat surface. Uneven or soft surfaces (like carpets) may affect accuracy.
- Do not use the scale on wet or slippery surfaces to prevent falls.
- Do not jump on the scale. Step on and off gently.
- Keep the scale away from extreme temperatures, direct sunlight, and high humidity.
- This scale is for personal use only and not intended for medical or commercial purposes.
- Keep batteries out of reach of children. Dispose of used batteries responsibly.
Package Contents
Please check that all items are present in the package:
- Soehnle Style Sense Digital Personal Bathroom Scale (Model 63332)
- Lithium metal batteries (pre-installed or included separately)
- Instruction Manual (this document)
Setup
1. Battery Installation
Your scale requires lithium metal batteries, which are included. If not pre-installed, open the battery compartment on the underside of the scale and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
2. Initial Placement
Place the scale on a hard, flat, and stable surface. Avoid placing it on carpets or uneven flooring, as this can affect measurement accuracy. The scale's flat design ensures high stability.
Image: Side profile of the Soehnle Style Sense Digital Personal Bathroom Scale 63332, highlighting its slim design.
3. First Use / Calibration
For the first use or after moving the scale, it is recommended to perform an initial calibration:
- Gently tap the scale with your foot to turn it on. The display will show '0.0'.
- Step off the scale and wait for it to turn off automatically.
- The scale is now calibrated and ready for accurate measurement.
Operating Instructions
Taking a Measurement
- Ensure the scale is on a firm, flat surface.
- Step directly onto the scale. The scale will automatically turn on and display your weight. There is no need to 'tap' it beforehand.
- Stand still on the scale until your weight is displayed and stabilizes.
- The weight will be shown on the large LCD display.
- After a few seconds, the scale will automatically turn off to conserve battery life.
Changing Weight Units (if applicable)
Some models allow switching between measurement units (e.g., kilograms, pounds). Look for a small button on the underside of the scale, usually near the battery compartment. Press this button to cycle through available units.
Maintenance and Care
- Cleaning: Wipe the scale surface with a damp cloth and a mild detergent if necessary. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a dry place at room temperature. Avoid placing heavy objects on the scale when not in use.
- Battery Replacement: If the display shows a 'Lo' or 'Err' message, or if the display becomes dim, it may be time to replace the batteries. Follow the battery installation steps in the Setup section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display / Scale does not turn on | Dead or incorrectly installed batteries. | Check battery polarity or replace batteries. |
| Inaccurate readings | Scale on uneven/soft surface; not calibrated; moved recently. | Place on a hard, flat surface. Perform initial calibration (step on, step off). |
| Display shows 'Err' | Overload (weight exceeds maximum capacity) or internal error. | Step off the scale. If the error persists, replace batteries or contact support. |
| Display shows 'Lo' | Low battery. | Replace batteries. |
Specifications
| Brand | Soehnle |
| Model Number | 63332 |
| Type | Digital Personal Bathroom Scale |
| Material | Safety Glass, Stainless Steel, Plastic |
| Color | Silver |
| Display Type | LCD |
| Product Dimensions (L x W x H) | 31 x 31 x 1.8 cm (12.2 x 12.2 x 0.7 inches) |
| Item Weight | 2 kg (4.4 lbs) |
| Power Source | Lithium Metal Batteries (included) |
| Special Features | Automatic On/Off, High Stability, Large Platform, Accurate measurement on various floor types |
| Maximum Weight Capacity | 5 kg (Note: This value is provided in the product specifications but is unusually low for a personal bathroom scale. Typical capacities are 150-180 kg.) |
| Measurement Units | Kilograms (kg), Pounds (lb) |
| Reading Accuracy | 0.1 kg / 0.2 lb increments (typical for digital scales) |
Warranty and Support
Soehnle products are manufactured to high-quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, or visit the official Soehnle website for detailed warranty information and customer support contact details.
For technical assistance, troubleshooting not covered in this manual, or spare parts, please contact Soehnle customer service directly. Contact information can typically be found on the product packaging or the official brand website.