Introduction
This manual provides essential information for the safe and effective use of your Belkin 3-Socket Surge Protector, model F9E300zb1.5MGRY. This device is designed to protect your electronic equipment from power surges and spikes, ensuring their longevity and reliable operation. Please read these instructions carefully before use and retain them for future reference.
Safety Information
- Do not exceed the electrical ratings of this surge protector.
- Do not use in wet environments or near water.
- Do not open or modify the device. There are no user-serviceable parts inside.
- Ensure the surge protector is plugged into a properly grounded wall outlet.
- Keep out of reach of children.
- If the surge protector shows signs of damage, discontinue use immediately.
Product Overview
The Belkin 3-Socket Surge Protector provides reliable power distribution and surge protection for your electronic devices. Key features include:
- 3 Universal Sockets: Accommodates various plug types.
- 1.5-Meter Heavy-Duty Cable: Provides flexible placement.
- Overload Protection: Automatically cuts power to prevent damage from excessive current.
- Maximum Spike Current: 6500 Amps.
- Response Time: < 1 Nanosecond for rapid protection.
- 3-Line AC Protection: Grounds AC power through all three lines (Live, Neutral, Ground).

Figure 1: Belkin 3-Socket Surge Protector, showing the power switch and universal outlets.

Figure 2: The surge protector as it appears in its retail packaging.
Setup
- Unpack: Carefully remove the surge protector from its packaging.
- Placement: Position the surge protector on a flat, stable surface, away from heat sources, direct sunlight, and moisture. Ensure the cable can reach the wall outlet without being stretched or kinked.
- Connect to Power: Plug the surge protector's power cord into a standard, grounded wall outlet.
- Connect Devices: Plug your electronic devices (e.g., laptop, printer, audio sound system, DVD player, home theater) into the universal sockets of the surge protector.
- Power On: Press the power switch on the surge protector to the 'ON' position. The indicator light (if present) should illuminate, confirming power is supplied.

Figure 3: Example of a device connected to the surge protector.
Operating Instructions
Once set up, operating the Belkin 3-Socket Surge Protector is straightforward:
- Power Switch: Use the integrated power switch to turn power on or off to all connected devices simultaneously. When the switch is in the 'ON' position, power is supplied.
- Overload Indicator: The surge protector features an overload protection system. In the event of an electrical overload (too many devices drawing too much power), the protector will automatically cut power to prevent damage. If this occurs, the power switch may trip to the 'OFF' position or an indicator light may change.
- Universal Sockets: The universal design allows for compatibility with various plug types without the need for adapters. Ensure plugs are inserted firmly.
Maintenance
To ensure optimal performance and longevity of your surge protector:
- Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the surge protector for any signs of damage, such as frayed wires, cracks, or discoloration. If damage is found, discontinue use.
- Ventilation: Ensure the surge protector is not covered or placed in an area where ventilation is restricted, as this can lead to overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Surge protector switch is OFF. Wall outlet has no power. Overload protection tripped. | Ensure switch is ON. Test wall outlet with another device. Unplug some devices, then reset the surge protector by turning it OFF and ON. |
| Surge protector feels warm. | Normal operation with multiple devices. Poor ventilation. | Ensure it's not covered. If excessively hot, reduce connected load. |
| Indicator light is off (if applicable). | Surge protection may be compromised. | The surge protector may no longer be providing full protection. Consider replacing the unit. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Belkin |
| Model Number | F9E300zb1.5MGRY |
| Total Power Outlets | 3 |
| Voltage | 350 Volts |
| Special Feature | Surge Protection |
| Maximum Current | 6500 Amps |
| Cable Length | 1.5 Meters (5 Feet) |
| Response Time | < 1 Nanosecond |
| Compatible Devices | Audio Sound System, DVD Player, Home Theater, Laptop, Printer |
| Material | Bakelite |
| Item Weight | 372 Grams |
| Color | Gray |
Warranty
This Belkin 3-Socket Surge Protector comes with a Lifetime Warranty (Max 5 Years). Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Belkin warranty policy.

Figure 4: General warranty graphic. Refer to product specifications for specific warranty duration.
Support
For product issues, queries, or technical assistance, please contact Belkin support:
- Toll-Free Number (India): 1-800-572-2092
- Operating Hours: Monday to Friday - 10 am to 10 pm (IST)
- Manufacturer: Belkin Inc.
- Importer (India): RASHI PERIPHERALS PRIVATE LIMITED
You can also visit the official Belkin website for more information and support resources.