Gardner Bender FTX-15GL Glo Fish Sticks User Manual

Introduction

The Gardner Bender FTX-15GL Glo Fish Sticks are designed to simplify the installation of wires through various structural obstacles such as walls, ceilings, and under carpets. These luminescent fiberglass rods glow in the dark, enhancing visibility and aiding in navigating complex pathways. The interlocking design allows for adjustable lengths, and the included attachments provide versatility for different wiring tasks.

Package Contents

• 5 x 3-foot Luminescent Fiberglass Rods (totaling 15 feet when connected)
• 1 x Bullet Nose Attachment
• 1 x Hook End Attachment

Image: The complete set of five interlocking fiberglass rods, along with the bullet nose and hook end attachments.

Setup and Assembly

1. Determine Required Length: Assess the distance and complexity of the path where the wire needs to be run.
2. Connect Rods: Select the appropriate number of 3-foot fiberglass rods. Each rod features an interlocking end. Align the ends and push them firmly together to create a secure connection. Repeat until the desired length, up to 15 feet, is achieved.
3. Attach End Tip: Choose either the bullet nose attachment or the hook end attachment based on your task.
   • Bullet Nose: Use for guiding the stick smoothly through conduits or tight spaces, pushing wires.
   • Hook End: Use for pulling wires, or for retrieving wires from difficult-to-reach areas.
   Securely screw the chosen attachment onto the end of the assembled fish stick.
4. Charge Glow Feature: For optimal visibility in dark environments, expose the Glo Fish Sticks to a light source (natural or artificial) for a few minutes before use. The luminescent fiberglass will absorb light and glow in the dark.
   

   Image: A fiberglass fish stick demonstrating its glow-in-the-dark capability in a low-light setting.

Operating Instructions

The Glo Fish Sticks are designed for efficient wire pulling and pushing in various applications. Always ensure the work area is clear and safe before beginning.

1. Identify Path: Determine the entry and exit points for the wire run.
2. Insert Fish Stick: Carefully insert the assembled fish stick into the wall, ceiling, or floor cavity. Use the glow feature to monitor its path and avoid obstructions.
   

   Image: A glowing fish stick being maneuvered underneath a carpet, illustrating its use in confined spaces.

   

   Image: A glowing fish stick extending through a wall or ceiling cavity, highlighting its visibility in dark areas.
3. Attach Wire: Once the fish stick reaches the desired location, attach the wire to be pulled or pushed. If using the hook end, loop the wire securely. If using the bullet nose for pushing, tape the wire to the tip if necessary.
4. Pull/Push Wire: Gently pull or push the fish stick back, guiding the wire through the cavity. Avoid excessive force to prevent damage to the stick or the wire.
5. Disassemble: After use, disconnect the rods and attachments for storage.

Maintenance and Care

• Cleaning: Wipe down the fiberglass rods with a clean, damp cloth after each use to remove any dust or debris.
• Storage: Store the Glo Fish Sticks in a dry place, away from direct sunlight and extreme temperatures, to preserve the integrity of the fiberglass and the luminescent properties.
• Inspection: Periodically inspect the rods for any signs of wear, cracks, or damage. Do not use damaged rods as they may splinter or break during use.
• Handling: While durable, fiberglass can splinter if severely bent or damaged. Handle with care and consider wearing gloves during prolonged use.

Troubleshooting

Product Specifications

Warranty and Support

For warranty information or technical support regarding your Gardner Bender FTX-15GL Glo Fish Sticks, please contact Gardner Bender customer service directly. Refer to the product packaging or the official Gardner Bender website for the most current contact details and warranty terms.

Gardner Bender Official Website: www.gardnerbender.com