Friedrich KWIFI Wi-Fi Kit User Manual

1. Introduction

The Friedrich KWIFI Wi-Fi Kit is designed to enhance the functionality of your Friedrich Kuhl and Kuhl+ N-Series air conditioning units. This adapter enables wireless control of your air conditioner, allowing you to manage settings such as power, temperature, and scheduling remotely via a dedicated application on your computer, tablet, or smartphone.

This kit is specifically compatible with Friedrich Kuhl and Kuhl+ N-Series models (e.g., xxxxN10, xxxxN30, etc.).

2. Safety Information

• Read all instructions carefully before installation and operation.
• Ensure the air conditioning unit is powered off and unplugged before installing the KWIFI kit.
• Do not expose the KWIFI kit to water or excessive moisture.
• Handle the components with care to avoid damage.
• If you encounter any difficulties during installation, contact qualified service personnel or Friedrich customer support.

3. Package Contents

Verify that all items are present in your KWIFI Wi-Fi Kit package:

• KWIFI Wi-Fi Dongle
• FAT-formatted USB Thumb Drive
• Micro-USB to USB Cable

4. Setup and Installation

Follow these steps to install and set up your Friedrich KWIFI Wi-Fi Kit:

1. Prepare the Air Conditioner: Ensure your Friedrich Kuhl or Kuhl+ N-Series air conditioner is powered off and unplugged from the electrical outlet.
2. Locate USB Port: Identify the USB port on your air conditioning unit. This is typically located on the front panel or within an accessible compartment.
3. Connect KWIFI Dongle: Insert the KWIFI Wi-Fi Dongle into the USB port of the air conditioner.
4. Power On Unit: Plug the air conditioner back into the electrical outlet and power it on.
5. Software Download: On a computer, download the necessary software for the KWIFI kit from the official Friedrich website.
6. Transfer Software: Transfer the downloaded software files to the provided FAT-formatted USB thumb drive.
7. Update Air Conditioner: Insert the USB thumb drive into the air conditioner's USB port (if different from the dongle port, or follow specific instructions for your model to initiate the software update). Follow any on-screen prompts or digital display indicators on the air conditioner to complete the software installation.
8. Register Device: Access the Friedrich Link website or download the Friedrich Link mobile application. Follow the instructions within the platform to register your KWIFI-enabled air conditioner. This typically involves creating an account and pairing your device.
9. Verify Connection: Once registered, use the Friedrich Link app to confirm that your air conditioner is online and responsive.

This image displays the Friedrich KWIFI Wi-Fi Kit module. It is a compact, rectangular device, primarily blue in color, featuring the white Friedrich logo prominently on its surface. This module enables wireless control for compatible Friedrich Kuhl and Kuhl+ N-Series air conditioners.

5. Operating the KWIFI Kit

Once installed and configured, the KWIFI kit allows you to control your Friedrich air conditioner remotely:

• Remote Control: Use the Friedrich Link app on your smartphone, tablet, or computer to turn the unit on or off from anywhere with an internet connection.
• Temperature Adjustment: Adjust the desired temperature settings remotely.
• Scheduling: Create and manage custom schedules for your air conditioner's operation, optimizing comfort and energy usage.
• Mode Selection: Change operating modes (e.g., Cool, Fan, Dry) as supported by your specific air conditioner model.

Note: There may be a short delay (typically 10-30 seconds) between sending a command via the app and the air conditioner responding, depending on network conditions.

6. Maintenance

The Friedrich KWIFI Wi-Fi Kit requires minimal maintenance. Ensure the dongle remains securely connected to the air conditioner's USB port. Keep the device clean and free from dust. Periodically check the Friedrich website or app for any available firmware updates for the KWIFI kit or the Friedrich Link application to ensure optimal performance and access to new features.

7. Troubleshooting

• Connection Issues: If the app shows the unit as offline, check your home Wi-Fi network's stability and signal strength. Ensure the air conditioner is powered on and the KWIFI dongle is properly inserted.
• Commands Not Responding: Verify your internet connection on your control device (smartphone, tablet, computer). Close and re-open the Friedrich Link app. Allow a few moments for commands to transmit and for the unit to respond.
• App Functionality: Ensure your Friedrich Link app is updated to the latest version. If issues persist, try uninstalling and reinstalling the app.
• Initial Setup Problems: Re-verify all steps in the 'Setup and Installation' section. Ensure the software update to the air conditioner was successful.
• Unit Not Recognized: Confirm that your air conditioner model is an N-Series Kuhl or Kuhl+ unit, as the KWIFI kit is specifically designed for these models.

For persistent issues, refer to the Friedrich support website or contact customer service.

8. Specifications

9. Warranty and Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Friedrich website. For technical support, troubleshooting assistance, or inquiries about your Friedrich KWIFI Wi-Fi Kit, please contact Friedrich customer service through their official channels.

Friedrich Contact Information:
Please visit www.friedrich.com for support resources and contact details.