Introduction
The Clore Automotive Pro-Logix PL2310 is a 10-Amp fully-automatic smart charger designed for 6V and 12V battery charging, maintenance, and stable power supply. This versatile unit is engineered to optimally charge and maintain various battery types, including Flooded, AGM, Gel Cell, Spiral Wound, Marine, and Deep Cycle batteries. Its intelligent multi-phase charging process ensures efficient and safe battery care, making it suitable for professional technicians and enthusiasts alike.
Key Features
- Charge and Maintain 6V and 12V Batteries: Supports both 6-volt and 12-volt battery systems.
- 2/6/10 Amp Charge Rates: Offers selectable charge rates for added versatility, adapting to different battery sizes and charging needs.
- Fully Automatic Operation: Simplifies the charging process by automatically detecting battery type and condition, then applying the optimal charging routine.
- Advanced Multi-Phase Charging Process: Utilizes a proprietary multi-stage charging algorithm for optimal battery health and longevity.
- Stable Power Supply Mode: Provides a continuous power output (up to 10 amps for PL2310) to maintain system voltage, ideal for vehicle diagnostics, programming, or preventing battery drain during extended accessory use.
- Temperature Compensation: Automatically adjusts charging parameters based on ambient temperature, ensuring optimal charging performance in extreme hot or cold conditions (from -22°F to 113°F).
- Battery Desulfation: Features a mode to activate desulfation if battery sulfation is detected, helping to restore battery capacity.
- Soft Start Mode: Protects deeply discharged batteries from initial charge stress.
- Exercising Feature: Introduces a load on the battery to simulate active use, then recharges it, helping to maintain optimum battery condition during storage.
Setup
1. Initial Inspection
Before use, inspect the charger and its cables for any signs of damage. Ensure all connections are clean and free of corrosion. The unit features integrated cord and clamp storage for convenience.
Figure 1: Top view of the Clore Automotive PL2310 Smart Charger, showing the control panel and status center.
2. Connecting to Battery
- Ensure the charger is unplugged from the AC power outlet.
- Connect the red positive (+) clamp to the positive (+) terminal of the battery.
- Connect the black negative (-) clamp to the negative (-) terminal of the battery.
- For vehicle batteries, connect the negative clamp to a non-painted metal part of the vehicle chassis away from the battery and fuel lines.
3. Powering On
Once the battery clamps are securely connected, plug the charger's AC power cord into a suitable electrical outlet. The charger will power on and begin its initial energizing mode.
Operating Instructions
Charging Modes and Rates
The PL2310 offers various settings to optimize charging for different battery types and conditions. Use the "VOLTS" button to select between 6V, 12V, or Power Supply mode. Use the "TYPE" button to select Standard, AGM, or LiFePO4 battery types. Use the "RATE" button to select the desired charge rate: 2A, 6A, or 10A.
Figure 2: The PL2310 supports various battery types including AGM, Deep Cycle, Flooded, Lithium (LiFePO4), Spiral Wound, and Marine batteries.
Multi-Phase Charging Process
The charger employs a proprietary multi-stage charging process designed to optimally charge and maintain batteries. This process includes several phases:
- Phase 1: Energizing - The charger determines the best charging path for the connected battery. This may involve a soft start mode for deeply discharged batteries to protect them from initial charge stress.
- Phase 2: Fast Charge - In most cases, the charger enters this stage to rapidly charge the battery.
- Phase 3: Absorption - The charging current decreases as the battery approaches full charge.
- Phase 4: Completion - The battery is brought to full charge.
- Phase 5: Resting - Once fully charged, the charger's output is virtually turned off, only occasionally monitoring battery condition. This reduces chemical reaction within the battery, extending its lifespan compared to traditional maintenance modes.
- Phase 6: Exercising - The charger introduces a controlled load on the battery to simulate active use. This feature helps maintain the battery's optimum condition, especially during long-term storage.
- Phase 7: Restoring - After the exercising phase, the battery is recharged to full capacity.
Figure 3: The PL2310 features automatic temperature compensation, adjusting to extreme temperatures from -22°F to 113°F.
Power Supply Mode
In Power Supply (PS) mode, the charger provides a steady power output (up to 10 amps for the PL2310) with the goal of maintaining a stable system voltage of 14.1V DC. This is useful for preventing battery drain when performing vehicle diagnostics or programming that requires continuous power without drawing from the vehicle's battery.
Figure 4: The stable power supply feature helps maintain vehicle voltage during repair or diagnostic procedures.
Status Indicators
The Status Center on the charger provides clear indications of the charging process:
- Charging in Progress: Indicates the battery is actively being charged.
- Charging Complete: Illuminates when the battery has reached full charge.
- Polarity: Lights up if the battery clamps are connected with incorrect polarity. Disconnect and re-connect correctly.
- Error: Indicates an issue with the battery or charging process, such as a short circuit or unsafe battery conditions.
Figure 5: The status center clearly displays "Charging in Progress" or "Charging Complete".
Figure 6: The charger can force charge deeply discharged batteries down to 0.0 volts.
Maintenance
General Care
Keep the charger clean and dry. Wipe down the exterior with a soft, damp cloth. Ensure the cooling fan vents are clear of obstructions to prevent overheating. Regularly inspect cables and clamps for wear or damage.
Storage
Store the charger in a cool, dry place when not in use. Utilize the integrated cord and clamp storage features to keep cables organized and prevent damage. For long-term battery storage, the charger's maintenance modes (including the exercising feature) help keep batteries in optimal condition.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not turning on. | No AC power, loose connection. | Check AC outlet, ensure power cord is fully plugged in. |
| "Polarity" indicator is lit. | Incorrect battery clamp connection. | Disconnect charger from AC, then re-connect red clamp to positive (+) and black clamp to negative (-). |
| "Error" indicator is lit. | Battery fault (e.g., shorted cell) or unsafe condition. | Disconnect charger. Inspect battery for damage. If battery is severely damaged, it may not be chargeable. |
| Battery not charging. | Battery is deeply discharged (below 0.0V) or severely sulfated. | The charger has a soft start and desulfation mode for these conditions. Allow the charger to attempt to recover the battery. If it fails, the battery may be beyond recovery. |
Note: The PL2310 is a charger and maintainer, not a jump starter. It will not provide enough current to start a vehicle with a completely dead battery.
Specifications
- Model: PL2310
- Brand: Clore Automotive
- Manufacturer: SOLAR
- Input Voltage: 120V AC
- Output Voltage: 6V / 12V DC
- Charge Rates: 2A, 6A, 10A
- Power Supply Output: Up to 10A continuous at 14.1V DC
- Compatible Battery Types: Flooded, AGM, Gel Cell, Spiral Wound, Marine, Deep Cycle, LiFePO4
- Item Weight: 3.9 pounds
- Product Dimensions: 9.4 x 8 x 4.5 inches
- Temperature Compensation: Yes (-22°F to 113°F)
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Clore Automotive website. Keep your purchase receipt as proof of purchase.
