1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Sauder Palladia Credenza, Model 412079. Please read all instructions carefully before beginning assembly or use to ensure proper function and longevity of your furniture.
Key Features:
- Top surface with full-length cord pass-through for convenient device charging.
- Sliding top and faux drawer fronts on full-extension ball bearing slides, revealing compartmentalized storage for electronics.
- Adjustable shelf behind each door for flexible storage configurations.
- Storage areas behind doors designed to accommodate computer or media components.
- Pull-out, adjustable center shelf for printer or other office equipment.
2. Safety Information
Please observe the following safety guidelines during assembly and use:
- Two-Person Assembly Recommended: Due to the size and weight of the components, assembly by two adults is strongly recommended to prevent injury and damage to the product.
- Use on Level Surface: Assemble and place the credenza on a flat, level surface to ensure stability and prevent tipping.
- Proper Lifting Techniques: When moving the credenza, lift with your legs, not your back, and seek assistance for heavy components.
- Secure All Fasteners: Ensure all screws, cams, and other fasteners are securely tightened according to the assembly instructions. Periodically check and retighten as needed.
- Weight Limits: Do not exceed the recommended weight limits for shelves and the top surface. Overloading can cause structural failure.
- Cord Management: Utilize the integrated cord management features to prevent tripping hazards and ensure proper ventilation for electronic devices.
- Children and Pets: Keep small children and pets away from the assembly area. Small parts can be a choking hazard.
3. Package Contents
Verify that all components are present before beginning assembly. Refer to the included assembly instructions for a detailed list of parts and hardware.
- Assembly instructions
- Hardware kit (screws, cams, dowels, etc.)
- Engineered wood panels and components
4. Assembly Instructions
Assembly is required for this product. Please follow the step-by-step instructions provided in the separate assembly manual included in your package. The process typically involves:
- Unpacking and Inspection: Carefully unpack all components and inspect for any damage. Report any damaged or missing parts immediately to customer support.
- Identify Parts: Lay out all panels and hardware, matching them to the diagrams in the assembly manual.
- Assemble Base Structure: Begin by assembling the main frame and base of the credenza.
- Install Shelves and Dividers: Insert fixed and adjustable shelves, and any internal dividers.
- Attach Door Hinges and Doors: Secure hinges to the doors and then attach doors to the credenza frame. Adjust as necessary for proper alignment.
- Install Sliding Mechanisms: Attach the full-extension ball bearing slides for the top and faux drawer fronts.
- Attach Back Panel: Secure the back panel to the credenza.
- Final Touches: Install handles, level the unit, and clean any dust or debris.
Figure 4.1: Product Dimensions. The credenza measures 29.61 inches in height, 62.05 inches in width, and 22.01 inches in depth.
Figure 4.2: Detail of the full-extension ball bearing slide. These slides ensure smooth operation of the sliding top and faux drawer fronts.
5. Operating Instructions
5.1. Sliding Top and Hidden Storage
The top surface of the credenza, along with the two faux drawer fronts, is designed to slide forward on full-extension ball bearing slides. This action reveals a hidden compartment for cord management and storage of electronic devices such as laptops, tablets, and phones.
Figure 5.1: The credenza top slides open to reveal a spacious storage area, ideal for laptops and other devices.
5.2. Cord Management and Charging
The hidden compartment includes integrated cord pass-throughs to facilitate easy tabletop charging of mobile devices. Route power cords through these openings to keep your charging area organized and clutter-free.
Figure 5.2: Integrated cord management allows for neat routing of charging cables for various devices.
5.3. Adjustable Shelves
Behind each of the two doors, there is a storage area with an adjustable shelf. To adjust the shelf height, remove the shelf and reposition the shelf pins to the desired level. Ensure all four pins are securely inserted before placing the shelf back.
5.4. Pull-Out Printer Shelf
The center section of the credenza features a pull-out shelf, specifically designed to accommodate a printer or other office equipment. This shelf also offers adjustability for optimal positioning.
Figure 5.3: The pull-out shelf provides easy access for a printer or other office devices.
6. Maintenance
6.1. Cleaning
- Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
- For spills, blot immediately with a clean, dry cloth.
6.2. General Care
- Avoid placing hot items directly on the surface. Use coasters or protective pads.
- Keep the credenza away from direct sunlight and heat sources to prevent fading or warping.
- Periodically check and tighten all hardware to ensure structural integrity.
7. Troubleshooting
7.1. Credenza is Wobbly
- Ensure the credenza is placed on a level surface.
- Check all cam locks and screws to ensure they are fully tightened.
7.2. Sliding Top/Drawers Do Not Operate Smoothly
- Inspect the ball bearing slides for any obstructions or debris.
- Ensure the slides are properly aligned and securely attached.
- Avoid overloading the hidden compartment, which can impede movement.
7.3. Doors Are Misaligned
- Adjust the hinges according to the instructions in the assembly manual. Most hinges allow for vertical, horizontal, and depth adjustments.
7.4. Missing or Damaged Parts
- Refer to the warranty and support section for information on obtaining replacement parts.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Sauder |
| Model Number | 412079 |
| Color | Select Cherry Finish |
| Dimensions (D x W x H) | 22.01" x 62.05" x 29.61" |
| Weight | 171 Pounds |
| Material | Engineered Wood |
| Finish Type | Select Cherry Finish |
| Mounting Type | Freestanding |
| Room Type | Living Room, Office |
| Door Style | Drawer (faux) |
| Number of Shelves | 2 (adjustable) |
| Number of Compartments | 2 (behind doors) |
| Assembly Required | Yes |
| Special Feature | Adjustable Shelf, Cord Management, Sliding Top |
9. Warranty and Support
9.1. Warranty Information
Sauder products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Sauder website for specific warranty terms and conditions.
9.2. Customer Support
For assistance with assembly, missing parts, or any other product-related inquiries, please contact Sauder customer support. They offer various support options:
- Live Chat: On-demand support available through the Sauder website.
- Assembly Tip Videos: Helpful video guides for assembly.
- Replacement Parts: Quick shipping for replacement parts.
- Domestic Call Center: Ready to assist with your questions.
Visit the Sauder Store on Amazon or the official Sauder website for contact details and further support resources.
10. Product Videos
No relevant official product videos from the seller were available for embedding in this manual.
