Imetec Relaxy IntelliSense Single Electric Blanket User Manual

1. Introduction

Thank you for choosing the Imetec Relaxy IntelliSense Single Electric Blanket. This product is designed to provide enhanced comfort and warmth, adapting to temperature changes throughout the night for a consistent and pleasant sleeping environment. Featuring rapid heating technology and multiple safety features, this electric blanket offers a convenient and efficient way to warm your bed.

Please read this manual carefully before using the appliance and keep it for future reference. Proper use and maintenance will ensure the longevity and safe operation of your electric blanket.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. This includes, but is not limited to, the following:

• Read all instructions before using this electric blanket.
• Do not use this blanket with an infant, a child, an invalid, a person insensitive to heat, or anyone who cannot clearly understand the instructions.
• Do not use this blanket if it is wet.
• Ensure the blanket is spread flat on the mattress and not folded, creased, or bunched up during use.
• Do not insert pins or other metallic objects into the blanket.
• Do not use with damaged cords or plugs. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Always unplug the appliance from the power outlet when not in use or before cleaning.
• Do not use this blanket in conjunction with another heating appliance.
• Keep the control unit away from water or other liquids.
• This appliance is intended for household use only.
• Regularly inspect the blanket for any signs of wear or damage. If any damage is observed, discontinue use immediately and contact customer support.

3. Setup

Follow these steps to properly set up your Imetec Relaxy IntelliSense Electric Blanket:

1. Unpack: Carefully remove the electric blanket and its control unit from the packaging.
2. Placement: Lay the electric blanket flat on your mattress. Ensure it covers the entire mattress surface without any folds or creases. The blanket is designed to be placed directly on the mattress, underneath your fitted sheet.
3. Secure: The blanket features comfortable corner straps or elastic bands (depending on the model) to secure it to the mattress, similar to a mattress protector. Ensure these are properly attached to prevent movement during use.
4. Connect Control Unit: Locate the connector on the blanket and firmly plug in the control unit cable. Ensure the connection is secure.
5. Power Connection: Plug the power cord of the control unit into a suitable 220V electrical outlet. Ensure the outlet is easily accessible.

An image showing the Imetec Relaxy IntelliSense Single Electric Blanket, folded neatly. The white control unit with a circular dial and buttons is visible on top of the blanket, connected by a cable. This illustrates the blanket's design and the attached controller.

4. Operating Instructions

The Imetec Relaxy IntelliSense Electric Blanket is designed for ease of use with its intuitive control unit.

• Power On/Off: Press the power button on the control unit to turn the blanket on or off.
• Temperature Selection: Use the temperature selection buttons or dial (refer to your specific control unit design) to choose your desired heat level. The IntelliSense technology offers up to 6 selectable temperature settings.
• Rapid Heating: The blanket features rapid heating technology, reaching your desired temperature in approximately 5 minutes, which is significantly faster than traditional electric blankets.
• IntelliSense Technology: Once a temperature is selected, the IntelliSense system automatically adjusts to changes in ambient temperature and your body temperature, maintaining a consistent and comfortable warmth throughout the night.
• Programmable Timer: The control unit includes a programmable auto-off timer with two time levels (e.g., 1 hour or 9 hours, depending on the model). Set the timer to automatically switch off the blanket after your preferred duration.
• Safety System: The exclusive Electro Block safety device is integrated to ensure safe operation, automatically shutting off the blanket in case of overheating or malfunction.

For optimal comfort, it is recommended to turn on the blanket approximately 5-10 minutes before getting into bed.

5. Maintenance and Cleaning

Proper maintenance ensures the longevity and hygiene of your electric blanket.

1. Disconnect Power: Always unplug the blanket from the power outlet and disconnect the control unit from the blanket before cleaning.
2. Washing: The Imetec Relaxy IntelliSense Electric Blanket is made from high-quality quilted cotton and is washable at 40°C. Follow these steps for washing:
   • Ensure the control unit is detached.
   • Machine wash on a gentle cycle at a maximum temperature of 40°C.
   • Do not bleach.
   • Do not iron.
   • Do not dry clean.
3. Drying:
   • Tumble dry on a low heat setting or line dry.
   • Ensure the blanket is completely dry before reconnecting the control unit and plugging it back into power.
4. Storage: When not in use, store the blanket in a cool, dry place. Avoid folding it tightly or placing heavy objects on it, which could damage the internal heating elements.

6. Troubleshooting

If you encounter any issues with your Imetec Relaxy IntelliSense Electric Blanket, please refer to the following common problems and solutions:

• Blanket is not heating:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check that the control unit is firmly connected to the blanket.
  • Verify that the power button on the control unit is pressed and a heat setting is selected.
  • If the Electro Block safety device has activated, unplug the blanket, wait a few minutes, and then plug it back in. If the issue persists, contact customer support.
• Blanket is not heating evenly:
  • Ensure the blanket is spread flat on the mattress without any folds, creases, or bunched areas.
• Control unit display is not working:
  • Check the power connection to the wall outlet and the connection to the blanket.
  • Try unplugging and re-plugging the unit.

If these steps do not resolve the issue, please contact Imetec customer support for further assistance.

7. Specifications

Note: Dimensions provided are for the product packaging. Actual blanket dimensions may vary.

8. Warranty and Support

For warranty information, please refer to the documentation included with your product at the time of purchase or visit the official Imetec website. Keep your proof of purchase for any warranty claims.

If you require technical support, have questions about your product, or need to report a malfunction, please contact Imetec customer service. Contact details can typically be found on the product packaging or the official Imetec website.

Manufacturer: Imetec