Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Peerless-AV SS560F Smart Mount Flat Panel Floor Stand. Designed to support 32-75 inch displays, this stand offers a stable and versatile mounting solution with integrated cable management.
Product Features
- Display can be positioned anywhere along the center column, offering flexible viewing angles.
- Integrated cable management protects, contains, and conceals cables for a clean and organized appearance.
- Wide base provides enhanced safety by preventing accidental tipping, ensuring stability for your display.
- Textured powder-coat finish helps to hide fingerprints and dust, maintaining a clean look.
- Open-frame display adapter helps prevent display input interference.
- Compatible with VESA mounting patterns from 200 x 200 to 600 x 400 mm.
Components Overview
This image displays the complete Peerless-AV SS560F Smart Mount Flat Panel Floor Stand, featuring its wide base, central column, and the display mounting bracket at the top.
What's in the Box
- PEERLESS SS560F Floor Stand Components
Please verify all components are present and undamaged before beginning assembly. Refer to the packing list included with your product for a complete inventory.
Setup and Installation
Before You Begin
- Read all instructions thoroughly before assembly.
- Ensure you have all necessary tools and components.
- Place the stand on a flat, stable surface during assembly.
- Two people are recommended for safe assembly and display mounting.
Assembly Steps (General Guide)
- Assemble the Base: Attach the two base feet to the main column using the provided hardware. Ensure they are securely tightened to provide maximum stability.
- Attach the Display Adapter: Secure the display adapter bracket to the top of the main column. This bracket will hold your television.
- Prepare the Display: Attach the vertical mounting rails to the back of your flat panel display, aligning with the VESA mounting holes. Ensure the rails are securely fastened to the display.
- Mount the Display: Carefully lift the display and hook the attached mounting rails onto the display adapter bracket on the stand. Secure the display to the stand using the locking mechanisms or screws as per the detailed instructions.
- Manage Cables: Route all display and power cables through the integrated cable management channels within the column to conceal and protect them.
Important: Always refer to the detailed assembly instructions and diagrams included with your PEERLESS SS560F product for specific fastener types, torque specifications, and step-by-step visual guidance. Failure to follow instructions precisely may result in product damage or injury.
Operating Instructions
Adjusting Display Position
The display can be positioned anywhere along the center column to achieve your desired viewing height. To adjust, loosen the necessary fasteners on the display adapter, carefully slide the display to the new position, and then securely re-tighten all fasteners to ensure stability.
Cable Management
Utilize the integrated cable management system to protect, contain, and conceal all display and power cables. This helps maintain a tidy and professional appearance while preventing cable damage or entanglement.
Maintenance
Cleaning
To clean the stand, use a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
Regular Inspection
Periodically (e.g., every 6-12 months) inspect all screws, bolts, and connections to ensure they remain securely tightened. Over time, vibrations or movement can cause fasteners to loosen. Re-tighten any loose components to maintain the stand's stability and safety.
Troubleshooting
Stability Issues
If the stand appears unstable, ensure it is placed on a flat, level surface. Verify that the wide base is fully extended and all components, especially the base and column connections, are securely fastened according to the assembly instructions.
Display Mounting Problems
Confirm your display's VESA mounting pattern is compatible with the stand (200x200 to 600x400 mm). Ensure the correct screws and spacers are used as per your display's manual and the stand's assembly guide. Double-check that the display rails are properly seated on the stand's adapter.
Cable Management Difficulties
If cables are not fitting or are difficult to route, ensure they are routed correctly through the internal channels. Avoid overstuffing the channels, which can cause damage to cables or the stand. Consider using thinner cables if space is limited.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Peerless-AV |
| Item Weight | 82.9 pounds |
| Product Dimensions | 30.5 x 37.25 x 9.38 inches |
| Item Model Number | SS560F |
| Color Name | Black |
| Mounting Type | Floor Mount |
| Movement Type | Tilt |
| Material | Plastic |
| Maximum Compatible Size | 75 Inches |
| Minimum Compatible Size | 32 Inches |
| Compatible Devices | Television |
| UPC | 735029279853 |
Customer Support
For technical assistance, warranty information, or replacement parts, please visit the official Peerless-AV website or contact their customer service department directly. Detailed contact information can typically be found on their official website.
You can also find more information and resources by visiting the Peerless-AV Store on Amazon.
