Armitron Sport Men's Digital Chronograph Resin Strap Watch 40/8246 Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Armitron Sport Men's Digital Chronograph Resin Strap Watch, model 40/8246. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

Image: Front view of the Armitron Sport Digital Chronograph Watch, model 40/8246, showcasing its matte black resin case, digital display, and button functions.

Safety Information

• Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
• Do not attempt to open the watch case or replace the battery yourself, as this may void the warranty and damage the watch. Consult a qualified watch technician.
• Clean the watch regularly with a soft, dry cloth. For resin straps, a damp cloth with mild soap can be used, followed by thorough drying.
• Ensure all buttons are fully pressed and released when operating the watch, especially when near water, to maintain water resistance.

Watch Components

Your Armitron Sport watch features a robust design with multiple buttons for various functions. Familiarize yourself with the button layout:

• MODE Button (Bottom Left): Cycles through different operational modes (Timekeeping, Alarm, Chronograph, Countdown Timer, World Time).
• SET/ADJ Button (Top Left): Used to enter and exit setting modes, and to adjust values.
• LIGHT Button (Top Right): Activates the backlight for improved visibility in low-light conditions.
• START/STOP/RESET Button (Bottom Right): Used to start/stop functions in Chronograph and Countdown Timer modes, and to reset values during setting.

Image: The Armitron Sport Digital Chronograph Watch worn on a person's wrist, demonstrating its size and fit.

Setup Instructions

1. Setting Time and Date

1. In Timekeeping Mode, press and hold the SET/ADJ button until the seconds begin to flash. This indicates you are in setting mode.
2. Press the MODE button to cycle through the settings: Seconds → Hour → Minute → Year → Month → Day.
3. Use the START/STOP/RESET button to adjust the flashing value. Hold the button to change values quickly.
4. Once all settings are correct, press the SET/ADJ button to exit the setting mode.

2. Setting World Time

Your watch includes a World Time function. To set a different time zone:

1. Press the MODE button repeatedly until you reach the World Time mode (indicated by a city code or similar).
2. Press the SET/ADJ button to select the desired city/time zone.
3. Use the START/STOP/RESET button to scroll through available city codes.
4. Press the SET/ADJ button to confirm your selection and exit World Time setting.

Operating Modes

Navigate through the watch's functions using the MODE button.

1. Timekeeping Mode

This is the default mode, displaying the current time, day, and date. Use the LIGHT button to illuminate the display in dark environments.

2. Alarm Mode

To set an alarm:

1. From Timekeeping Mode, press MODE until you reach Alarm Mode.
2. Press and hold SET/ADJ until the alarm hour flashes.
3. Use START/STOP/RESET to adjust the hour. Press MODE to switch to minutes, then adjust with START/STOP/RESET.
4. Press SET/ADJ to confirm and exit.
5. To turn the alarm ON/OFF, press START/STOP/RESET in Alarm Mode (without holding SET/ADJ).

3. Chronograph Mode (Stopwatch)

To use the stopwatch function:

1. From Timekeeping Mode, press MODE until you reach Chronograph Mode.
2. Press START/STOP/RESET to start the stopwatch.
3. Press START/STOP/RESET again to stop it.
4. To reset the stopwatch to zero, press SET/ADJ while the stopwatch is stopped.
5. Lap time functionality may be available by pressing SET/ADJ while the stopwatch is running. Press SET/ADJ again to return to the running time.

4. Countdown Timer Mode

To use the countdown timer:

1. From Timekeeping Mode, press MODE until you reach Countdown Timer Mode.
2. Press and hold SET/ADJ until the timer value flashes.
3. Use START/STOP/RESET to adjust the hours, minutes, and seconds (cycle with MODE).
4. Press SET/ADJ to confirm and exit.
5. Press START/STOP/RESET to start or pause the countdown.
6. When the timer reaches zero, an alarm will sound. Press any button to stop the alarm.

Maintenance

Cleaning

Regular cleaning helps maintain the appearance and functionality of your watch. Wipe the case and strap with a soft, lint-free cloth. For stubborn dirt on the resin strap, use a mild soap solution and rinse thoroughly, then dry completely.

Battery Replacement

The watch is powered by a single product-specific battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Water Resistance

Your Armitron Sport watch is water-resistant up to 330 feet (100 meters). This rating means it is suitable for swimming and snorkeling, but not for scuba diving. Avoid operating buttons while the watch is submerged in water to prevent water ingress.

Image: A water resistance chart illustrating different levels of water resistance for watches, indicating that 100M (330FT) is suitable for swimming and snorkeling.

Troubleshooting

Specifications

• Model Number: 40/8246
• Case Material: Resin
• Strap Material: Resin
• Display Type: Digital
• Functions: Hour, Minute, Second, Timekeeping, Alarm, Chronograph, Lap Time, Countdown Timer, World Time
• Water Resistance: 330 feet (100 meters)
• Battery: 1 Product Specific battery (included)
• Product Dimensions: 3.8 x 3 x 2.5 inches
• Weight: 3.84 ounces

Official Product Videos

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Armitron website. Keep your proof of purchase for warranty claims.

You can find more information and support resources on the Armitron Store.