Emtek EMPP26 Privacy Pin Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Emtek EMPP26 Privacy Pin. This privacy pin is designed for use with compatible Emtek door hardware to enable a privacy locking function, typically for bathrooms or bedrooms. Please read these instructions carefully before proceeding with installation or use to ensure proper function and longevity of the product.

2. Product Overview

The Emtek EMPP26 Privacy Pin is a small, essential component for adding a privacy function to specific Emtek door levers or knobs. It is constructed from durable stainless steel and features a polished chrome finish, designed to seamlessly integrate with your existing Emtek hardware.

Figure 1: Emtek EMPP26 Privacy Pin. This image displays the small cylindrical component, typically used with Emtek door hardware to enable a privacy locking function.

Key Features:

• Type: Part - Privacy Pin
• Finish: Polished Chrome (US26)
• Material: Stainless Steel
• Compatibility: Designed for Emtek door hardware products.

3. Setup & Installation

The Emtek EMPP26 Privacy Pin is intended to be inserted into a designated hole on compatible Emtek door levers or knobs. The exact installation procedure may vary slightly depending on the specific Emtek door hardware model you possess. Always refer to the instruction manual provided with your Emtek door lever or knob for precise installation steps.

General Installation Steps:

1. Identify the Privacy Hole: Locate the small hole on the interior side of your Emtek door lever or knob assembly. This hole is specifically designed to receive the privacy pin.
2. Align the Pin: Carefully align the Emtek EMPP26 Privacy Pin with the identified hole.
3. Insert the Pin: Gently push the privacy pin into the hole. It should slide in smoothly. If resistance is met, do not force it. Re-check alignment and ensure no obstructions are present. Some users report it can be slightly challenging to thread the pin if the door knob is in the way; adjust the knob position if necessary.
4. Test Functionality: Once inserted, test the privacy function as described in the "Operating Instructions" section to ensure the pin engages and disengages correctly.

Note: If you are unsure about the installation process, it is recommended to consult a qualified locksmith or refer to the specific installation guide for your Emtek door hardware.

4. Operating Instructions

Once the Emtek EMPP26 Privacy Pin is correctly installed, operating the privacy function is straightforward.

To Engage Privacy (Lock):

• From the interior side of the door, push the privacy pin inward. This action will engage the locking mechanism, preventing the exterior handle from opening the door.

To Disengage Privacy (Unlock):

• From the interior side, simply turn the door lever or knob. This action will automatically retract the privacy pin and unlock the door.
• In case of emergency, most Emtek privacy functions can be unlocked from the exterior using a small tool (e.g., a paperclip or a specialized emergency key) inserted into the emergency release hole on the exterior side of the door hardware.

5. Maintenance

The Emtek EMPP26 Privacy Pin requires minimal maintenance to ensure its continued smooth operation and appearance.

• Cleaning: To clean the privacy pin and surrounding hardware, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the polished chrome finish.
• Lubrication: If the pin feels stiff or difficult to operate over time, a small amount of silicone-based lubricant can be applied to the pin and the mechanism it engages. Do not use oil-based lubricants, as they can attract dust and debris.
• Inspection: Periodically inspect the pin for any signs of wear or damage. If the pin appears bent or broken, it should be replaced to ensure proper privacy function.

6. Troubleshooting

If you encounter issues with your Emtek EMPP26 Privacy Pin, refer to the following common problems and solutions:

• Pin does not insert fully:
  • Ensure the pin is correctly aligned with the hole in the door hardware.
  • Check for any obstructions within the hole.
  • Verify that the door hardware is an Emtek product compatible with this privacy pin.
• Privacy function does not engage/disengage:
  • Confirm the pin is fully inserted.
  • Apply a small amount of silicone lubricant to the pin and test again.
  • Inspect the internal mechanism of the door hardware for any visible damage or misalignment. If damage is suspected, professional assistance may be required.
• Pin feels loose or falls out:
  • The pin may be worn or the receiving mechanism in the door hardware may be damaged. Consider replacing the pin or inspecting the door hardware.

If these troubleshooting steps do not resolve the issue, please contact Emtek customer support or a qualified locksmith.

7. Specifications

8. Warranty & Support

Warranty Information:

Specific warranty details for the Emtek EMPP26 Privacy Pin are provided by Emtek. Please refer to the official Emtek website or contact Emtek customer service for comprehensive warranty terms and conditions applicable to your product.

Customer Support:

For further assistance, technical support, or inquiries regarding your Emtek EMPP26 Privacy Pin, please visit the official Emtek website or contact their customer service department. Contact information can typically be found on the Emtek website's "Contact Us" section.

Emtek Official Website: www.emtek.com