Product Overview
The LCN 8310-853TWP is a wireless, low-profile, low-voltage actuator designed for wall mounting. It features a durable stainless steel touch plate and is an essential component for automatic door operators, ensuring accessibility and compliance with building standards. This actuator is engineered for simple installation and reliable operation.
This image displays the LCN 8310-853TWP wireless actuator. It features a square, brushed stainless steel faceplate with a prominent blue handicap symbol and the words 'PUSH TO OPEN' engraved below it. The actuator is designed for wall mounting and is a key component for automatic door systems.
Setup and Installation
The 8310-853TWP actuator is designed for surface mounting. It includes an integral transmitter with a battery within its surface mount box. Installation should be performed by qualified personnel in accordance with local building codes and electrical standards.
Key Installation Considerations:
- Mounting Location: Select a suitable wall location that allows for easy access and complies with accessibility requirements.
- Low Voltage Wiring: Ensure proper low voltage wiring connections to the automatic door operator, if applicable.
- Battery Installation: The integral transmitter requires a battery for wireless operation. Ensure the battery is correctly installed and functional upon setup.
- Secure Mounting: Utilize the provided hardware to securely mount the actuator to the wall. The heavy industrial-grade components are designed for vandal-resistant mounting.
Operating Instructions
The LCN 8310-853TWP actuator functions as a push-button device to activate an automatic door operator. It operates in an automatic mode with a normally open contact type.
To Operate:
- Approach the door equipped with the LCN 8310-853TWP actuator.
- Locate the stainless steel touch plate with the engraved blue handicap symbol and "PUSH TO OPEN" text.
- Firmly press the touch plate. This action sends a wireless signal to the connected automatic door operator.
- The door will then activate and open automatically.
Ensure the path of the door is clear before activation to prevent obstruction or injury.
Maintenance
Regular maintenance helps ensure the longevity and reliable operation of your LCN 8310-853TWP wireless actuator. The unit features weather-resistant switch standard components, contributing to its durability.
Recommended Maintenance:
- Cleaning: Periodically wipe the stainless steel touch plate with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or engravings.
- Battery Check/Replacement: The integral transmitter contains a battery. If the actuator becomes unresponsive or operates intermittently, the battery may need to be checked or replaced. Refer to the full user guide for specific battery type and replacement instructions.
- Physical Inspection: Regularly inspect the actuator for any signs of physical damage, loose mounting, or wear. Address any issues promptly to maintain optimal performance and safety.
Troubleshooting
If you encounter issues with your LCN 8310-853TWP wireless actuator, refer to the following common troubleshooting steps:
- Actuator Not Responding:
- Check the battery in the integral transmitter. A depleted battery is a common cause of unresponsiveness.
- Ensure the actuator is within the effective range of the automatic door operator's receiver.
- Verify that there are no obstructions or sources of significant wireless interference between the actuator and the receiver.
- Intermittent Operation:
- This could indicate a weak battery. Replace the battery if necessary.
- Check for any loose wiring connections at the door operator's receiver end.
- Ensure the push button mechanism is not sticking or obstructed.
- Door Not Opening Fully/Closing Properly:
- This issue is typically related to the automatic door operator itself, not the actuator. Consult the door operator's manual for troubleshooting steps.
If problems persist after attempting these steps, contact LCN customer support or a qualified technician.
Specifications
| Feature | Description |
|---|---|
| Model Number | 8310-853TWP |
| Brand | LCN |
| Dimensions (Package) | 7.7 x 6.9 x 2.4 inches |
| Weight (Package) | 1.35 Pounds |
| Operation Mode | Automatic |
| Contact Type | Normally Open |
| Connector Type | Wireless |
| Actuator Type | Push Button |
| Contact Material | Stainless Steel |
| International Protection Rating | IP54 |
| Date First Available | May 26, 2012 |
Warranty Information
Specific warranty details for the LCN 8310-853TWP Wall Mounted Wireless Actuator are typically provided at the point of purchase or can be obtained directly from LCN or an authorized distributor. Please retain your proof of purchase for warranty claims.
Support and Further Resources
For additional support, technical assistance, or detailed installation guides, please refer to the official LCN documentation or contact LCN customer service.
- Official User Guide: A comprehensive user guide in PDF format is available for download. Download User Guide (PDF)
- Manufacturer Website: Visit the official LCN website for product updates, FAQs, and contact information.
