Introduction
This manual provides essential information for the Hot Wheels Acura NSX 2011 HW Performance die-cast model. It covers details regarding its design, specifications, and care to ensure its preservation as a collectible item.
The Hot Wheels Acura NSX 2011 HW Performance is a highly detailed 1:64 scale replica, part of the 2011 HW Performance Collection, specifically item 131/244.
Product Overview
The Hot Wheels Acura NSX 2011 HW Performance is a meticulously crafted die-cast vehicle. It features a vibrant blue and red color scheme, with "AEM" branding on the sides, indicative of its performance theme. The model is designed for display and light play, maintaining its collectible value.
Key Features:
- Hot Wheels Acura NSX model
- Part of the 2011 HW Performance Collection
- Scale: 1:64
- Collection Number: 1/10
- Overall Series Number: 131/244
Setup
The Hot Wheels Acura NSX 2011 HW Performance model comes pre-assembled and ready for display or play directly out of its packaging. No assembly is required.
Unboxing:
- Carefully remove the die-cast model from its blister packaging. Use scissors to cut around the plastic if necessary to avoid damaging the card art, especially if preserving the packaging is desired.
- Inspect the model for any manufacturing defects or damage incurred during shipping.
- Place the model on a flat, stable surface for display or prepare a suitable play area.
Note: The packaging is designed to protect the model during transit. Some collectors prefer to keep the model in its original packaging for preservation of value.
Operating
This Hot Wheels model is a static die-cast collectible with rolling wheels. It does not require batteries or complex operation.
Basic Operation:
- Rolling: The wheels are designed to roll smoothly on flat surfaces. Gently push the car forward or backward to observe its movement.
- Display: Position the model on a shelf, desk, or in a display case to showcase its design.
Avoid applying excessive force or dropping the model, as this can cause damage to the paint, wheels, or body.
Maintenance
Proper care and maintenance will help preserve the condition and value of your Hot Wheels die-cast model.
Cleaning:
- Dusting: Use a soft, dry cloth or a soft-bristled brush (like a clean, unused makeup brush) to gently remove dust from the model's surface.
- Spot Cleaning: For stubborn marks, lightly dampen a cotton swab with distilled water. Gently wipe the affected area and immediately dry with a clean, soft cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the paint finish.
Storage:
- Store the model in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. These conditions can cause paint fading, decal deterioration, or material degradation over time.
- Consider using a display case or protective plastic container to shield the model from dust and accidental damage.
Troubleshooting
As a non-electronic, static model, troubleshooting is generally limited to physical integrity issues.
Common Issues and Solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Wheels do not roll smoothly | Dust or debris in axle, bent axle, or damaged wheel. | Gently clean around the axles with a soft brush. If the axle is bent or wheel is damaged, repair may not be feasible without specialized tools or risking further damage. |
| Paint chipping or fading | Rough handling, exposure to sunlight, or harsh chemicals. | Avoid further rough handling. Store away from direct sunlight. Do not use chemical cleaners. Paint touch-ups are generally not recommended as they can decrease collectible value. |
| Model appears loose in packaging | Minor shift during transit. | This is usually not an issue unless the packaging is severely damaged. The model is secured to prevent significant movement. |
For significant damage, especially to collectible items, professional restoration services might be considered, though this can impact original value.
Specifications
| Attribute | Detail |
|---|---|
| Product Name | Hot Wheels Acura NSX 2011 HW Performance |
| Model Number | Hot Wheels (as per item model number) |
| Brand | Hot Wheels |
| Manufacturer | Mattel |
| Scale | 1:64 |
| Collection | 2011 HW Performance Collection |
| Collection Number | 1/10 |
| Series Number | 131/244 |
| Product Dimensions | 3.5 x 1.5 x 1.25 inches |
| Item Weight | 1.6 ounces |
| ASIN | B007FURCJU |
| Contents | 1 x Hot Wheels Acura NSX 2011 HW Performance Die-Cast Car |
Warranty and Support
Hot Wheels die-cast models, particularly collectible editions, typically do not come with a formal manufacturer's warranty for wear and tear or accidental damage due to their nature as collectible items. However, if you received a product with a manufacturing defect, please contact the retailer or the manufacturer directly upon receipt.
Manufacturer Contact:
For general inquiries regarding Hot Wheels products or manufacturing concerns, please refer to the official Mattel website or customer service channels.
Manufacturer: Mattel
For more information, visit the official Hot Wheels Store on Amazon.
