1. Introduction
This manual provides essential instructions for the safe and efficient use of your Creative SBS A-120 2.1 Channel Multimedia Speaker System. Please read this manual thoroughly before operating the device and retain it for future reference.
The Creative SBS A-120 system delivers quality audio for your multimedia needs, featuring a subwoofer for enhanced bass and two satellite speakers for clear sound reproduction.
2. Package Contents
Verify that all items listed below are included in your package:
- Subwoofer
- Two Satellite Speakers
- Wired Remote Control
- User Manual
- Audio Cables
- Warranty Card
3. Safety Information
- Do not expose the system to water or moisture.
- Do not place the system near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
- Ensure proper ventilation around the subwoofer and satellite speakers.
4. Setup and Connection
Follow these steps to connect your Creative SBS A-120 speaker system:
- Positioning: Place the subwoofer on the floor, ideally near a wall for optimal bass reflection. Position the two satellite speakers on either side of your listening area, facing you.
- Connect Satellite Speakers: Connect the cables from the two satellite speakers to the corresponding "LEFT" and "RIGHT" speaker output jacks on the rear of the subwoofer.
- Connect Wired Remote Control: Plug the wired remote control into the dedicated port on the rear of the subwoofer.
- Connect Audio Source: Connect the 3.5mm audio cable from the wired remote control to the audio output jack (e.g., headphone jack) of your computer, laptop, or other audio device.
- Power Connection: Plug the subwoofer's power cord into a wall outlet.
Image Description: A diagram illustrating the connection process for the Creative SBS A-120 speaker system. It shows the subwoofer, two satellite speakers, and the wired remote control. Numbered steps indicate how to connect the satellite speakers to the subwoofer, the wired remote to the subwoofer, and the remote to an audio source (like a computer or mobile device). The power cord connection for the subwoofer is also depicted.
Image Description: A front view of the Creative SBS A-120 2.1 Channel Multimedia Speaker System. It features a black subwoofer on the right, two compact black satellite speakers on the left, and a small wired remote control unit in the foreground. The speakers have a sleek, modern design.
5. Operating Instructions
- Power On/Off: The system powers on automatically when plugged in and the source device is active. There is no separate power button on the speakers or remote.
- Volume Control: Adjust the overall volume using the knob on the wired remote control. For optimal performance, it is recommended to set your computer's or audio source's volume to 100% and control the main volume via the speaker system's remote.
- Audio Input: The system uses a standard 3.5mm auxiliary input for connecting to various audio sources.
6. Maintenance
- Cleaning: Wipe the speaker surfaces with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Storage: If storing the system for an extended period, unplug it from the power outlet and store it in a cool, dry place.
- Ventilation: Ensure that the subwoofer and satellite speakers have adequate ventilation to prevent overheating. Do not block any vents.
7. Troubleshooting
If you encounter issues with your speaker system, refer to the following common solutions:
- No Sound:
- Ensure all cables are securely connected (power, satellite speakers, remote, audio source).
- Check if the audio source (computer, phone) is playing sound and its volume is turned up.
- Increase the volume on the wired remote control.
- Try connecting to a different audio source to rule out an issue with the original source.
- Distorted Sound:
- Lower the volume on both the speaker system and the audio source.
- Ensure the audio cable is fully inserted and not damaged.
- Check for interference from other electronic devices.
- Hissing or Thumping Noise from Subwoofer:
- Move the subwoofer slightly away from walls or other electronic devices (e.g., digital alarm clocks, wireless phones) that might cause interference.
- Ensure the audio cable connection is secure.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | A 120 |
| Speaker Type | Bookshelf, Satellite, Subwoofer |
| Surround Sound Channel Configuration | 2.1 |
| Frequency Response | 50 Hz to 20,000 Hz |
| Subwoofer Power | 4W RMS |
| Satellite Speaker Output | 2.5W per speaker |
| Total Audio Wattage | 9 Watts |
| Signal-to-Noise Ratio | 75 dB |
| Connectivity Technology | Wired (Auxiliary 3.5mm) |
| Control Method | Wired Remote |
| Compatible Devices | Desktop, Laptop, Mobile (via 3.5mm jack) |
| Item Weight | 3 kg |
| Product Dimensions (LxWxH) | 32.6 x 40.2 x 21.6 cm |
| Manufacturer | Creative Technology |
9. Warranty Information
This product comes with a 1 Year Limited Hardware Warranty from the date of purchase. This warranty is provided through the manufacturer's service center only.
Important Note: The warranty does not cover products that are physically damaged, burnt, or altered.
10. Support
For further assistance, technical support, or warranty claims, please contact Creative Technology's official support channels or visit their website.
You can also visit the Creative Store on Amazon for more product information.
