1. Introduction
Thank you for purchasing the THOMSON CR380PC Clock Radio. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions carefully before use and retain them for future reference.
2. Important Safety Instructions
- Power Source: Ensure the power source voltage matches the rating indicated on the clock radio.
- Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Water and Moisture: Do not use this apparatus near water or expose it to dripping or splashing.
- Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Cleaning: Clean only with a dry cloth.
- Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
3. Package Contents
Please check that all items are present and in good condition:
- THOMSON CR380PC Clock Radio (Black)
- Power Adapter
- User Manual (this document)
4. Product Overview
Familiarize yourself with the main components and controls of your CR380PC Clock Radio.

Figure 1: Front view of the CR380PC Clock Radio. This image displays the digital time display, speaker grille, and primary control buttons such as Time Set, Alarm Set, and Snooze.
4.1 Front Panel
- Digital Display: Shows time, alarm status, and radio frequency.
- Time Set Button: Used to set the current time.
- Alarm Set Button: Used to set the alarm time.
- Snooze/Sleep Button: Temporarily silences the alarm or activates sleep timer.
- Volume Up/Down Buttons: Adjusts audio volume.
- Tuning Buttons: Adjusts radio frequency.

Figure 2: Rear view of the CR380PC Clock Radio. This image highlights the power adapter input jack and the integrated FM antenna wire.
4.2 Rear Panel
- DC IN Jack: Connects to the power adapter.
- FM Antenna: For improved radio reception.
5. Setup
5.1 Power Connection
- Unpack the THOMSON CR380PC Clock Radio and its accessories.
- Connect the power adapter cable to the DC IN Jack on the rear of the clock radio.
- Plug the power adapter into a standard wall outlet. The display will light up, indicating the unit is powered.
5.2 Setting the Time
- Press and hold the Time Set Button until the hour digits begin to flash.
- Use the Tuning Buttons (or dedicated Hour/Minute buttons if present) to adjust the hour. Press Time Set again to confirm the hour.
- The minute digits will now flash. Use the Tuning Buttons to adjust the minutes.
- Press the Time Set Button one more time to save the current time.
6. Operating Instructions
6.1 Setting the Alarm
- Press and hold the Alarm Set Button until the alarm hour digits begin to flash.
- Use the Tuning Buttons to adjust the alarm hour. Press Alarm Set again to confirm.
- The alarm minute digits will flash. Use the Tuning Buttons to adjust the alarm minutes.
- Press Alarm Set again to save the alarm time.
- To activate/deactivate the alarm, press the Alarm Set Button briefly. An alarm icon will appear/disappear on the display.
6.2 Using the Radio
- Turn On/Off: Press the Power Button (if available, otherwise it might be integrated with volume or mode).
- Tune Frequency: Use the Tuning Buttons to manually adjust the radio frequency.
- Adjust Volume: Use the Volume Up/Down Buttons to set the desired listening level.
- Improve Reception: Extend and adjust the position of the FM antenna wire on the rear panel for better signal reception.
6.3 Snooze Function
When the alarm sounds, press the Snooze/Sleep Button to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.
6.4 Sleep Timer Function
To fall asleep to music, press the Snooze/Sleep Button repeatedly while the radio is playing to cycle through sleep timer options (e.g., 90, 60, 30, 15 minutes, OFF). The radio will automatically turn off after the selected duration.
7. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to clean the exterior of the clock radio. Do not use abrasive cleaners, waxes, or solvents.
- Storage: If the unit is not used for an extended period, unplug it from the power outlet and store it in a cool, dry place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Display off | Power adapter not connected or faulty outlet. | Ensure the power adapter is securely plugged into the unit and a working wall outlet. |
| Alarm does not sound | Alarm not activated or set incorrectly. | Verify the alarm time is set correctly and the alarm icon is visible on the display. |
| Poor radio reception | Antenna not extended or interference. | Fully extend and adjust the FM antenna. Move the unit away from other electronic devices that may cause interference. |
| Buttons unresponsive | Temporary software glitch. | Unplug the unit from the power outlet for a few minutes, then plug it back in to reset. |
9. Specifications
| Model: | CR380PC |
| Brand: | THOMSON |
| Color: | Black |
| Material: | Plastic |
| Power Source: | Electric (AC Adapter) |
| Alarm Function: | Yes |
| Installation Type: | Tabletop Mount |
10. Warranty and Support
THOMSON products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official THOMSON website. For technical support or service inquiries, please contact your local THOMSON customer service center. Keep your proof of purchase for warranty claims.
Online Support: www.thomsonconsumer.com/support





