Introduction
The Elmo MO-1 Visual Presenter is a compact and versatile document camera designed for high-quality imaging and presentation. Its portable design makes it suitable for various environments, from classrooms to offices. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MO-1 Visual Presenter.
Product Overview
Figure 1: Elmo MO-1 Visual Presenter, unfolded and ready for use.
The Elmo MO-1 is engineered for portability and ease of use, featuring a 1/3.2" 5-megapixel CMOS sensor capable of capturing effective pixels of 2,048 (H) x 1,536 (V). It includes an 8x digital zoom and an F2.9 lens, allowing for a maximum shooting area of 10.1" x 13.4" (WXGA/XGA/VGA). Its flexible camera arm and head can swivel 300 degrees, providing versatile viewing angles. The unit also integrates a built-in microphone, an SD card slot, HDMI input, and can be powered via USB, making it a high-precision tool for visual presentations.
Safety Information
Please read and understand all safety instructions before using the Elmo MO-1 Visual Presenter. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.
- Do not expose the unit to rain or moisture.
- Do not disassemble or modify the unit. Refer all servicing to qualified service personnel.
- Use only the power cord and AC adapter supplied with the unit.
- Avoid placing the unit in direct sunlight or near heat sources.
- Ensure proper ventilation around the unit during operation.
- Keep the unit away from strong magnetic fields.
Package Contents
Verify that all items listed below are included in your package:
- Elmo MO-1 Visual Presenter Unit
- Power cord
- AC adapter
- USB cable
- CD-ROM (Image Mate software, User manual, Quick start guide)
- Warranty card
Setup
1. Unpacking and Physical Setup
- Carefully remove the MO-1 Visual Presenter and all accessories from the packaging.
- Place the unit on a stable, flat surface.
- Unfold the camera arm and adjust the camera head to the desired position. The arm is flexible, and the head can swivel 300 degrees to capture various angles.
2. Connecting Power
- Connect the supplied AC adapter to the DC IN port on the MO-1 unit.
- Plug the power cord into the AC adapter and then into a standard electrical outlet.
- Alternatively, the unit can be powered via USB by connecting the supplied USB cable to a computer's USB port.
3. Connecting to a Display Device
The MO-1 offers multiple output options for connecting to a display or computer:
- HDMI Output: Connect an HDMI cable from the MO-1's HDMI OUT port to an HDMI input on your display (e.g., TV, projector). Supports 1080i (30fps) and 720p (30fps, 60fps).
- Analog RGB Output: Connect a D-Sub cable from the MO-1's RGB OUT port to a VGA input on your display. Supports WXGA/XGA (20fps) and 720p (30fps).
- USB Output: Connect the supplied USB cable from the MO-1's USB Type B (mini) port to a USB port on your computer. This allows for image transfer and control via software like Image Mate. Supports WXGA/XGA (20fps), VGA (20fps), 1080p (15fps), 720p (30fps).
Operation
1. Power On/Off
- Press the Power button on the unit to turn it on. The power indicator light will illuminate.
- Press and hold the Power button again to turn the unit off.
2. Adjusting Image and Focus
- Focus: The MO-1 features auto-focus. For manual adjustment, use the Focus +/- buttons or the one-push auto-focus button.
- Zoom: Use the Zoom +/- buttons to digitally zoom in or out on the captured image (up to 8x digital zoom).
- White Balance: Adjust the white balance using the dedicated controls to ensure accurate color reproduction. Options include Auto and Manual.
- Image Rotation: The live camera image can be rotated 0°/180°. Saved images can be rotated 0°/90°/180°/270°.
3. Input Switching
The MO-1 allows switching between different input sources:
- Use the Input Select button to cycle through HDMI, RGB, USB, and External input sources.
4. Using the Built-in Microphone
The integrated microphone captures audio during presentations or recordings. Ensure your connected display or recording device is configured to receive audio from the MO-1.
5. SD Card Usage
Insert an SD card into the designated slot to save captured images or videos directly to the card. Refer to the on-screen menu or the Image Mate software for recording and playback options.
Maintenance
1. Cleaning
- Before cleaning, disconnect the power cord from the unit.
- Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water and then wipe dry.
- Do not use abrasive cleaners, waxes, or solvents (e.g., alcohol, benzene, thinners) as they may damage the finish.
- Gently clean the camera lens with a lens cleaning cloth designed for optical surfaces.
2. Storage
- When not in use for extended periods, fold the unit into its compact form.
- Store the MO-1 in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the unit in its original packaging or a protective case to prevent dust accumulation and physical damage.
Troubleshooting
If you encounter issues with your Elmo MO-1 Visual Presenter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on display. |
|
|
| Image is blurry or out of focus. |
|
|
| Poor image quality or color issues (e.g., red tint). |
|
|
| Unit does not power on. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Image Pick-up Device | 1/3.2" 5Megapixel CMOS sensor |
| Effective Pixels | 2,048 (H) x 1,536 (V) |
| Zoom | 8x digital |
| Lens | F2.9 |
| Shooting Area Max. | 10.1" x 13.4" (WXGA/XGA/VGA) |
| Focus | Auto (one-push)/Manual |
| White Balance | Auto/Manual |
| HDMI Output | 1080i (30fps), 720p (30fps, 60fps) |
| Analog RGB Output | WXGA/XGA (20fps), 720p (30fps) |
| USB Output | Type B (mini), WXGA/XGA (20fps), VGA (20fps), 1080p (15fps), 720p (30fps) |
| Input Terminal | Analog RGB (D-Sub), HDMI (Type A) |
| Image Rotation | Live camera image: 0°/180°, Saved image: 0°/90°/180°/270° |
| Illumination | White LED |
| Power Source | 5V DC, 2A (AC 100 - 240V, 50/60 Hz) / Powered via USB |
| Power Consumption | 4.2W (standby 0.25W) / USB 3.3W |
| Dimensions (WxDxH) | Set up: 3.97" x 8.89" x 13.3", Folded: 3.97" x 8.89" x 1.1" |
| Weight | 1.2 lbs |
Warranty and Support
Warranty Information
The Elmo MO-1 Visual Presenter comes with a warranty card included in the package. Please refer to this card for specific details regarding the warranty period and coverage. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Elmo USA website or contact their customer support. Contact information can typically be found on the warranty card or the manufacturer's website.
