Woods Light Duty Extension Cord User Manual

Product Overview

The Woods 5607 is a 10-foot, 16-gauge, SPT-2 extension cord designed for indoor use. It features three outlets, allowing multiple devices to be powered simultaneously. This cord is UL listed, ensuring it meets safety standards. Its solid molded power taps and strain relief neck contribute to a compact design and extended cord life. It is suitable for powering various indoor tools, appliances, and lamps.

Key Features

• Provides a total of 3 outlets for multiple connections.
• UL listed for safety and quality assurance.
• Features solid molded power taps in a compact design.
• Equipped with a strain relief neck for enhanced durability and longer cord life.
• Ideal for indoor use with tools, appliances, and lamps.

Image: The Woods 5607 extension cord, 10 feet long, with three outlets, shown in its retail packaging. The cord is gray and coiled, with the plug and outlet visible.

Safety Information

Always read and understand all instructions before using this product. Failure to follow these instructions may result in fire, electric shock, or injury.

• Indoor Use Only: This extension cord is designed for indoor use. Do not use it outdoors or in wet conditions.
• Voltage Rating: Ensure the total voltage of connected devices does not exceed 125 Volts.
• Prevent Overloading: Do not overload the extension cord. The total amperage of all connected appliances should not exceed the cord's rating (15 Amps). Overloading can cause overheating and fire.
• Proper Insertion: Fully insert the plug into the outlet. A loose connection may cause overheating.
• Avoid Damage: Do not run the cord through doorways, under carpets, or near heat sources. Inspect the cord regularly for damage. Do not use if the cord or plug is damaged.
• Keep Away from Children: Store the cord out of reach of children when not in use.
• UL Listed: This product is UL listed, indicating it meets nationally recognized safety standards.

Setup

Setting up your Woods extension cord is straightforward. Follow these steps for safe and effective use:

1. Uncoil the Cord: Gently uncoil the entire length of the extension cord to prevent kinks and overheating.
2. Identify Power Source: Locate a standard 125V indoor wall outlet. Ensure the outlet is easily accessible and not obstructed.
3. Plug in the Extension Cord: Insert the two-prong plug of the Woods extension cord firmly into the wall outlet. Ensure it is fully seated.
   

   Image: A close-up view of the two-prong male plug of the gray extension cord, designed for insertion into a standard wall outlet.

4. Connect Devices: Plug your appliances, tools, or lamps into the three available outlets on the extension cord. Ensure each plug is fully inserted.
   

   Image: A detailed view of the three-outlet female end of the extension cord, showing the compact design and a protective cover over one of the outlets.

Operating Instructions

The Woods 5607 extension cord is designed for light-duty applications. To ensure optimal performance and safety, adhere to the following guidelines:

• Load Capacity: This 16-gauge cord is suitable for light-duty appliances such as lamps, fans, and small electronics. Refer to the appliance's power requirements and ensure the total current draw does not exceed 15 Amps.
• Multiple Outlets: Utilize the three outlets as needed, but always be mindful of the total power consumption. Do not connect high-wattage appliances that could collectively exceed the cord's capacity.
• Avoid Daisy-Chaining: Do not plug one extension cord into another. This practice, known as "daisy-chaining," can lead to overheating and fire hazards.
• Placement: Position the cord where it will not be a tripping hazard and where it is protected from physical damage.

Image: An informational chart detailing various wire gauges (16, 14, 12, 10) and their corresponding types of use, from light duty to extra heavy duty, along with examples of appliances and tools suitable for each gauge.

Maintenance

Proper maintenance ensures the longevity and safe operation of your extension cord.

• Regular Inspection: Periodically inspect the cord, plug, and outlets for any signs of damage, such as cuts, fraying, cracks, or discoloration.
• Cleaning: Disconnect the cord from the power source before cleaning. Wipe the cord and outlets with a dry, clean cloth. Do not use liquid cleaners or immerse the cord in water.
• Storage: When not in use, coil the cord loosely and store it in a cool, dry place away from direct sunlight, moisture, and extreme temperatures. Avoid tightly wrapping the cord around objects, which can damage the internal wires.
• Disposal: If the cord becomes damaged, discontinue use immediately and dispose of it according to local electrical waste regulations. Do not attempt to repair damaged cords.

Troubleshooting

If you encounter issues with your extension cord, consider the following common troubleshooting steps:

If problems persist after following these steps, discontinue use and contact customer support.

Specifications

Warranty Information

This Woods extension cord is covered by a 180 Days Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or modifications.

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Woods product documentation or contact customer support.

Support & Contact

For further assistance, technical support, or inquiries regarding your Woods Light Duty Extension Cord, please contact the manufacturer directly.

You can visit the official Woods brand store for more information and product resources: Woods Brand Store

Please have your product model number (5607) and purchase details ready when contacting support.