Sangean PR-D6 Portable AM/FM Analog Radio Instruction Manual

1. Introduction

The Sangean PR-D6 is a compact, analog-tuned portable radio designed for reliable AM/FM listening. It features a robust build and intuitive controls, providing clear audio quality for various environments. This manual provides essential information for the proper setup, operation, and maintenance of your PR-D6 radio.

Image 1.1: Front view of the Sangean PR-D6 Portable AM/FM Analog Radio with carrying strap and antenna extended.

2. Package Contents

Ensure all items are present in the package:

• Sangean PR-D6 Portable AM/FM Analog Radio
• Owner's Manual
• FM Antenna (rubberized non-telescoping)
• Carrying Strap
• AC Power Adapter

3. Product Overview

The Sangean PR-D6 features a user-friendly design with clearly labeled controls and ports.

3.1 Front Panel

Image 3.1: Close-up of the radio's front panel, showing the speaker grille, tuning dial, and display.

• Speaker: Integrated 3-inch speaker for audio output.
• Tuning Dial: Analog dial for precise station selection.
• Display: Softly lighted analog display showing selected frequency.
• Power/Band Switch: Selects between OFF, AM, and FM bands.
• Memory Presets (1-5): Buttons to store and recall favorite stations.
• HD Seek +/-: For seeking HD Radio channels (if available in your area).
• Menu/Info/Page: Buttons for navigating menus and displaying information.
• Low Batt Indicator: LED indicator for low battery status.

3.2 Side Panel

• Tuning Knob: Used for manual tuning of AM/FM frequencies. Also functions as a seek/select button.
• Volume/Tone Knob: Controls audio volume. Pressing this knob allows switching between volume, treble, and bass adjustments.

3.3 Rear Panel & Ports

Image 3.2: Rear view highlighting dimensions and various input/output ports.

• DC IN (7.5V/0.8A): Power input for the included AC adapter.
• Earphone Jack (3.5mm): For private listening with headphones. Supports FM stereo.
• REC OUT: Audio output for connecting to a recording device.
• AUX IN: Auxiliary input for connecting external audio sources (e.g., MP3 player).
• Telescopic Antenna: Extendable antenna for improved FM reception.
• Battery Compartment: Houses 4 C-size batteries (not included).
• Carrying Handle: Integrated handle for portability.

4. Setup

4.1 Powering the Radio

The PR-D6 can be powered by either batteries or the included AC power adapter.

4.1.1 Battery Installation

1. Open the battery compartment cover on the rear of the radio.
2. Insert 4 C-size batteries (not included) according to the polarity indicators inside the compartment.
3. Close the battery compartment cover securely.

4.1.2 Using the AC Power Adapter

1. Connect the AC power adapter to the DC IN jack on the radio.
2. Plug the AC power adapter into a standard wall outlet.
3. When using the AC adapter, battery power consumption is automatically bypassed.

5. Operating Instructions

5.1 Turning On/Off and Band Selection

1. Slide the Power/Band switch to 'AM' or 'FM' to turn on the radio and select the desired band.
2. Slide the switch to 'OFF' to turn off the radio.

5.2 Tuning to a Station

5.2.1 Manual Tuning

1. Rotate the Tuning knob on the side of the radio to manually scan through frequencies.
2. Observe the analog display for the current frequency.
3. Extend the telescopic antenna for optimal FM reception.

5.2.2 Seeking Stations (HD Radio)

The 'HD SEEK +/-' buttons are specifically for seeking HD Radio signals. For general AM/FM scanning, use the Tuning knob on the side.

1. Press the Tuning knob (on the side) briefly in the direction you wish to seek (up or down). The radio will automatically scan for the next available strong station.
2. Press and hold the Tuning knob to continuously scan through the band. Release when a desired station is found.

5.3 Adjusting Volume and Tone

1. Rotate the Volume/Tone knob to adjust the volume.
2. Press the Volume/Tone knob to cycle through Volume, Treble, and Bass settings. Rotate the knob to adjust the selected tone setting.

5.4 Using Memory Presets

1. Tune to your desired station.
2. Press and hold one of the numeric preset buttons (1-5) until the display confirms the station is saved.
3. To recall a preset, simply press the corresponding numeric button.
4. Use the 'PAGE' button to access additional pages of presets.

5.5 External Audio Connections

• Earphone: Plug 3.5mm headphones into the Earphone jack for private listening.
• AUX IN: Connect an external audio device (e.g., smartphone, MP3 player) to the AUX IN jack using a 3.5mm audio cable.
• REC OUT: Connect a recording device to the REC OUT jack to record radio broadcasts.

6. Maintenance

• Clean the radio with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• If not using the radio for extended periods, remove the batteries to prevent leakage.
• Avoid exposing the radio to extreme temperatures, direct sunlight, or high humidity.

7. Troubleshooting

• No Power: Check battery installation or AC adapter connection. Ensure batteries are fresh or charged.
• Poor Reception: Extend and adjust the telescopic antenna for FM. For AM, rotate the radio for best reception. Move away from electronic devices that may cause interference.
• No Sound: Check volume level. Ensure headphones are not plugged in if you intend to use the speaker.
• Difficulty Tuning: The analog tuning dial may require fine adjustment. Use the seek function for HD Radio channels.

8. Specifications

9. Warranty & Support

The Sangean PR-D6 is covered by a limited warranty. Please refer to the warranty card included in your product packaging for detailed terms and conditions. For technical support or service inquiries, please contact Sangean America, Inc. directly.