Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your KOHLER 1153944-BN Lever Handle Base Kit. This genuine KOHLER part is designed to ensure optimal performance and longevity for your faucet. Please read these instructions carefully before proceeding with installation or use.
Image: The KOHLER 1153944-BN Lever Handle Base Kit, featuring a vibrant brushed nickel finish. This image displays the complete kit, including the lever handle and base components.
Package Contents
Verify that all components are present before beginning installation:
- Lever Handle Base Kit
- Lever Handle
- Mounting Screws
Image: A banner displaying the 'KOHLER Genuine Parts' logo, surrounded by various faucet components, emphasizing the authenticity and quality of replacement parts.
Installation Instructions
Tools Required:
- Adjustable Wrench
- Screwdriver (appropriate type for mounting screws)
- Plumber's Putty or Silicone Sealant (optional, for base sealing)
Step-by-Step Installation:
- Turn Off Water Supply: Locate the water supply valves under your sink and turn them off completely. Turn on the faucet to drain any remaining water and relieve pressure.
- Remove Existing Handle (if applicable): If replacing an old handle, carefully remove any decorative caps, then unscrew the handle screw and lift off the old handle and base. Note the orientation of any existing components.
- Prepare Mounting Surface: Clean the area where the new handle base will be installed, ensuring it is free of debris or old sealant.
- Install New Base: Position the new lever handle base kit onto the faucet body. Ensure it is properly aligned. Secure the base using the provided mounting screws. Tighten screws firmly but do not overtighten.
- Attach Lever Handle: Place the lever handle onto the base. Secure it with the appropriate screw, typically located on the side or front of the handle.
- Test Operation: Slowly turn the water supply valves back on. Check for any leaks around the base and connections. Operate the lever handle to ensure smooth movement and proper water flow control.
Operation
The KOHLER 1153944-BN Lever Handle operates by rotating the lever to control water flow and temperature. Push the lever down to turn off the water and lift it up to turn on. Rotate the lever left or right to adjust the water temperature, typically with hot water on the left and cold water on the right, depending on your faucet's configuration.
Maintenance and Care
To maintain the finish and performance of your KOHLER lever handle base kit, follow these guidelines:
- Cleaning: Clean the surface with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Regular Inspection: Periodically check the handle for any looseness. If the handle feels loose, gently tighten the set screw.
- Avoid Damage: Do not use excessive force when operating the handle.
Troubleshooting
If you encounter issues with your lever handle, refer to the following common problems and solutions:
- Loose Handle: If the handle feels wobbly, locate the set screw (usually on the underside or side of the handle) and tighten it with an appropriate screwdriver.
- Water Leaks from Base: Ensure all connections are tight. If leaks persist, the O-rings or gaskets may need inspection or replacement. Consult a professional plumber if unsure.
- Stiff Operation: If the handle is difficult to move, mineral deposits may have accumulated. Cleaning the internal components may be necessary.
For issues not covered here, please contact KOHLER customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | K-1153944-BN |
| Part Number | 1153944-BN |
| Material | Metal |
| Color | Vibrant Brushed Nickel |
| Product Dimensions | 7.55"L x 2.8"W |
| Item Weight | 9.4 ounces (0.27 Kilograms) |
| Handle Attachment Mechanism | Screws |
| Special Feature | Easy to Install |
| UPC | 650531122247 |
Warranty Information
As a genuine KOHLER part, this lever handle base kit is designed and engineered to meet KOHLER's rigorous quality standards, ensuring compatibility and maintaining the original product's performance and warranty. Always look for the KOHLER GENUINE PARTS logo to protect your product's warranty and ensure optimal functionality.
Image: Four circular icons illustrating the benefits of KOHLER Genuine Parts: certified to meet codes, made with quality materials, assures optimal performance, and protects product warranty.
Image: A visual comparison highlighting the differences between KOHLER Genuine Parts and Non-OEM parts for various plumbing components, emphasizing the superior design and testing of genuine parts.
Image: A table detailing the guarantees offered by KOHLER Genuine Parts (e.g., designed by engineers, premium materials, extensive testing, exact fit) versus the lack of such guarantees for Non-OEM parts.
For specific warranty terms and conditions, please refer to the official KOHLER website or contact KOHLER customer service.
Customer Support
For further assistance, technical support, or to inquire about other genuine KOHLER parts, please visit the official KOHLER website or contact their customer service department.
Official KOHLER Website: www.kohler.com
