1. Introduction
This manual provides essential information for the safe and effective use of your Elinchrom Modeling Lamp 100W (230V). Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the product.
2. Product Overview
The Elinchrom Modeling Lamp 100W (230V) is a high-quality E27 base bulb designed for professional photography lighting systems. It offers an average operational life of 500 hours and produces light with a color temperature of approximately 3200K, providing a warm white illumination. This lamp is specifically engineered for compatibility with various Elinchrom heads, including but not limited to EL 250, 250 S, 500, 500 S, 22, 23, 66, S, T, Box Lite, Style 300 / 600, Style FX 100 / 400, and MiniLite, as well as any other fixture that matches the specified voltage and features an E27 base.
Figure 2.1: Elinchrom Modeling Lamp 100W/230V. This image shows the full view of the modeling lamp, highlighting its E27 screw base and the frosted bulb. The Elinchrom branding and specifications (100W 196V, Made in Italy) are visible on the bulb's surface.
3. Features
- Strong and Portable: Designed for durability and ease of handling.
- Long Service Life: Engineered to provide years of reliable service.
- Optimal Compatibility: Specifically designed for Elinchrom studio lighting systems.
- Standard Base: Features an E27 screw base for wide compatibility with appropriate fixtures.
- Warm Color Temperature: Produces light at approximately 3200K, ideal for consistent lighting setups.
4. Setup
- Power Off: Ensure the lighting unit is completely powered off and unplugged from the mains electricity before handling the lamp.
- Cool Down: Allow the existing lamp (if any) and the lighting unit to cool down completely before attempting removal or installation. Hot lamps can cause severe burns.
- Handle with Care: Hold the new modeling lamp by its base or the frosted glass, avoiding direct contact with the clear glass surface to prevent oil residue from skin, which can shorten lamp life.
- Installation: Carefully screw the E27 base of the modeling lamp into the lamp socket of your Elinchrom lighting unit. Ensure it is securely tightened but do not overtighten.
- Power On: Once the lamp is securely installed, plug the lighting unit back into the mains and power it on.
Important Safety Note: Always ensure the correct voltage lamp is used for your specific lighting unit. This lamp is rated for 230V. Using an incorrect voltage lamp can damage the unit or the lamp itself.
5. Operating
The Elinchrom Modeling Lamp functions as a continuous light source within your studio strobe or lighting unit, aiding in previewing light patterns and focus before flash discharge. Its operation is typically controlled by the lighting unit itself.
- Power Control: The modeling lamp's on/off function and intensity (if supported by your lighting unit) are controlled via the settings on your Elinchrom strobe or power pack. Refer to your specific Elinchrom unit's manual for detailed instructions on modeling lamp control.
- Purpose: Use the modeling lamp to visualize shadows, highlights, and light spread on your subject before taking a photograph. This helps in precise light placement and composition.
- Heat Generation: The lamp generates heat during operation. Ensure adequate ventilation around your lighting unit and avoid placing flammable materials near the lamp.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your modeling lamp.
- Cleaning: If the lamp surface becomes dusty, gently wipe it with a soft, dry, lint-free cloth when the lamp is cool and powered off. Do not use abrasive cleaners or liquids.
- Replacement: Replace the modeling lamp when it burns out or its light output significantly diminishes. Always use genuine Elinchrom replacement lamps to ensure compatibility and performance.
- Storage: When not in use for extended periods, store the lamp in its original packaging or a protective container in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. |
|
|
| Lamp flickers or is dim. |
|
|
| Lamp burns out quickly. |
|
|
8. Specifications
| Brand | Elinchrom |
| Model Number | EL23002 |
| Light Type | Halogen |
| Wattage | 100 watts |
| Voltage | 230 Volts |
| Bulb Base | E27 |
| Color Temperature | Approximately 3200 Kelvin |
| Average Life | 500 Hours |
| Product Dimensions | 4.2 x 2.5 x 2.4 inches |
| Item Weight | 1.41 ounces (0.04 Kilograms) |
| Specific Uses | Photography |
Note: Specifications are subject to change without notice. Please refer to the product packaging or official Elinchrom website for the most current information.
9. Warranty Information
Specific warranty details for the Elinchrom Modeling Lamp 100W/230V (EL23002) are not provided in the available product data. For comprehensive warranty information, please refer to the official Elinchrom website or contact Elinchrom customer support directly. Keep your proof of purchase for any warranty claims.
10. Support
For technical assistance, product inquiries, or support, please visit the official Elinchrom website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their website.
Elinchrom Official Website: www.elinchrom.com
For Amazon-related inquiries, you may visit the Elinchrom Store on Amazon.
