1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your Breo iDream1260 Head, Eye, and Neck Massager. Please read this manual thoroughly before operating the device and retain it for future reference.
The Breo iDream1260 is designed to provide a relaxing massage experience for the head, eyes, and neck. It incorporates various massage techniques including air pressure, vibration, pressure point massage, and infrared heat compression, along with integrated music for enhanced relaxation.
2. Product Overview
2.1 Key Features
- Targeted massage for head, neck, and eye areas.
- Multiple massage modes: Air Pressure, Vibration, Pressure Point, and Infrared Heat Compression.
- Individual control settings for each massage type.
- Integrated music options for enhanced relaxation.
- Convenient attached remote control for easy adjustments.
- Power options: AC adapter or batteries.
2.2 Components
The Breo iDream1260 consists of the main massager unit and an attached remote control. Refer to the images below for visual identification of components.
Figure 1: Front view of the Breo iDream1260 massager and its attached remote control. The massager is a helmet-like device designed to cover the head, eyes, and neck, with the remote control featuring various buttons for mode selection and power.
Figure 2: Back view of the Breo iDream1260 massager, showing the adjustable straps and the overall structure that cradles the head and neck.
Figure 3: A person wearing the Breo iDream1260 massager, demonstrating how the device is positioned on the head and over the eyes for use.
3. Setup
3.1 Unpacking
- Carefully remove all components from the packaging.
- Verify that all items are present: Breo iDream1260 massager unit with attached remote, AC power adapter, and this user manual.
- Inspect the device for any signs of damage. Do not use if damaged.
3.2 Powering the Device
The Breo iDream1260 can be powered using the included AC power adapter or batteries.
Using the AC Power Adapter:
- Locate the power input port on the massager unit.
- Connect the AC power adapter to the massager.
- Plug the AC power adapter into a standard electrical outlet.
Using Batteries:
- Locate the battery compartment on the massager unit.
- Open the battery compartment cover.
- Insert the required number and type of batteries (e.g., AA batteries) according to the polarity indicators (+/-).
- Close the battery compartment cover securely.
Note: Batteries are typically not included and must be purchased separately. Refer to the device's battery compartment for specific battery type requirements.
4. Operating Instructions
The Breo iDream1260 is operated using the attached remote control. Ensure the device is properly powered before use.
4.1 Remote Control Functions
The remote control allows you to power the device on/off, select massage modes, adjust intensity, and control music playback.
- Power Button: Press to turn the device on or off.
- Mode Selection Buttons: Cycle through or select specific massage modes (Air Pressure, Vibration, Pressure Point, Heat).
- Intensity Adjustment: Increase or decrease the intensity of the selected massage mode.
- Music Control: Play, pause, skip tracks, or adjust volume for the integrated music.
4.2 Using the Massager
- Positioning: Place the massager on your head, ensuring it comfortably covers your eyes and the back of your neck. Adjust the straps for a snug but not overly tight fit.
- Power On: Press the power button on the remote control to turn on the device.
- Select Massage Mode: Use the mode selection buttons to choose your desired massage type. You can combine modes or use them individually.
- Adjust Settings: Modify the intensity of the massage and the level of heat (if applicable) using the remote control.
- Music Playback: If desired, activate the integrated music feature and select from the available ambient sounds or melodies. Adjust volume as needed.
- Duration: The device may have pre-set massage durations. If not, use for a comfortable period, typically 10-20 minutes per session.
- Power Off: After your session, press the power button to turn off the device.
Caution: Do not use the massager for extended periods without breaks. Consult a physician if you experience discomfort.
5. Maintenance
5.1 Cleaning
- Always disconnect the massager from the power source before cleaning.
- Wipe the exterior of the device with a soft, slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
- Ensure no liquid enters the device's internal components.
- Allow the device to air dry completely before storage or next use.
5.2 Storage
- Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove batteries to prevent leakage.
- Keep out of reach of children.
6. Troubleshooting
If you encounter issues with your Breo iDream1260, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | No power supply; batteries depleted or incorrectly inserted; AC adapter not connected. | Ensure AC adapter is securely plugged in. If using batteries, replace them or check polarity. |
| Massage intensity is weak or inconsistent. | Low battery power; incorrect mode selected; device not positioned correctly. | Replace batteries or use AC adapter. Select a different mode or adjust intensity settings. Reposition the massager for optimal contact. |
| No music playback. | Music feature not activated; volume too low. | Activate the music function on the remote. Increase the volume. |
| Device feels uncomfortable. | Straps too tight; intensity too high; prolonged use. | Adjust straps for a looser fit. Reduce massage intensity. Take a break from using the device. |
If the problem persists after attempting these solutions, please contact Breo customer support.
7. Specifications
| Model Number | AK-67UNHE1260-BO |
| Brand | Breo |
| Product Name | iDream1260 Head, Eye, and Neck Massager |
| Dimensions (L x W x H) | 23.19 x 27.79 x 24.28 cm |
| Weight | 0.88 Kilograms (880 g) |
| Power Source | AC Adapter, Battery Powered |
| Material | Plastic |
| Color | White |
| Special Features | Heat function |
| Target Areas | Head, Eyes, Neck |
| Massage Types | Air Pressure, Vibration, Pressure Point, Infrared Heat Compression |
8. Warranty and Support
For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Breo website. Keep your proof of purchase for warranty claims.
If you require technical assistance, have questions about product operation, or need to report a defect, please contact Breo customer support through their official channels. Contact details can typically be found on the product packaging or the Breo website.
Breo Official Website: Visit the Breo Store on Amazon
