Rubbermaid WaveBrake Down Press Combo - 35 qt. Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Rubbermaid WaveBrake Down Press Combo 35 qt. mop bucket system. Please read this manual thoroughly before operating the product and retain it for future reference.

Safety Information

• Read all instructions: Familiarize yourself with the product's features and operation before use.
• Use appropriate personal protective equipment: Wear gloves and eye protection when handling cleaning chemicals.
• Avoid overfilling: Do not exceed the 35-quart capacity to prevent spills and maintain stability.
• Secure the wringer: Ensure the down-press wringer is properly seated and secured on the bucket before use.
• Keep clear of moving parts: Exercise caution when operating the wringer to avoid pinching fingers or hands.
• Store safely: Store the mop bucket system in a secure, dry place away from children and pets.
• Inspect before use: Check for any damage or wear before each use. Do not use if components are broken or missing.

Package Contents

Verify that all components are present and undamaged upon unpacking:

• 1 x 35-quart Mop Bucket (Yellow)
• 1 x Down Press Wringer
• 1 x Handle (integrated or attachable, depending on model design)

Note: Mop head and cleaning solutions are sold separately.

Setup

Follow these steps to prepare your WaveBrake Down Press Combo for use:

1. Unpack Components: Carefully remove the mop bucket and wringer from their packaging.
2. Inspect for Damage: Check all parts for any signs of damage during shipping. Contact customer support if any components are damaged or missing.
3. Attach Wringer: Place the down-press wringer securely onto the rim of the 35-quart mop bucket. Ensure it is firmly seated and stable. Some models may have clips or grooves for a secure fit.
4. Fill Bucket: Fill the bucket with the desired cleaning solution and water, ensuring not to exceed the maximum fill line or 35-quart capacity.

Figure 1: The Rubbermaid WaveBrake Down Press Combo 35 qt mop bucket system. This image shows the yellow bucket with the down-press wringer securely attached, ready for use. Note the compact design for efficient mopping.

Operating Instructions

Follow these steps for effective mopping:

1. Prepare Mop: Dip your mop head into the cleaning solution within the bucket, ensuring it is fully saturated.
2. Wring Mop: Place the saturated mop head into the wringer basket. Press down firmly on the wringer handle to squeeze out excess water. The WaveBrake design helps reduce splashing.
3. Mop Floor: Mop the desired area, applying even pressure.
4. Rinse and Repeat: Rinse the mop head in the bucket as needed, then wring it out again before continuing to mop.
5. Empty Bucket: Once cleaning is complete, carefully transport the bucket to a drain and empty the dirty water.

Maintenance

Proper maintenance ensures the longevity and hygiene of your mop bucket system:

• Clean After Each Use: Rinse the bucket and wringer thoroughly with clean water after each use to remove any cleaning solution residue and dirt.
• Disinfect Regularly: Periodically disinfect the bucket and wringer, especially if used in environments requiring high hygiene standards. Use a mild disinfectant solution and rinse thoroughly.
• Inspect for Wear: Regularly check the wringer mechanism and bucket for cracks, breaks, or signs of wear. Replace components as necessary.
• Store Dry: Store the bucket and wringer in a dry, well-ventilated area to prevent mold and mildew growth.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact Rubbermaid Commercial Products directly. Refer to the official Rubbermaid website or product packaging for the most current contact details and warranty terms.

Official Website: www.rubbermaidcommercial.com