1. Introduction
The Squire Key Keep 1 is a robust, wall-mounted key safe designed for secure storage of keys and small items. It features a 4-wheel recodable combination lock, offering 10,000 possible combinations for enhanced security. Constructed from durable die-cast alloy, it is suitable for both indoor and outdoor use, providing a reliable solution for key access.
Key Features:
- High Security: 4-wheel combination lock with 10,000 recodable combinations.
- Durable Construction: Made from high-quality die-cast alloy, resistant to shock, water, and corrosion.
- Weatherproof: Designed to withstand various weather conditions.
- Large Storage Capacity: Accommodates multiple keys and cards.
- Versatile Mounting: Suitable for easy installation on various surfaces, indoors or outdoors.
2. Setup
2.1 Unpacking and Initial Inspection
Carefully remove the key safe from its packaging. Inspect the unit for any signs of damage. Ensure all components, including mounting hardware, are present.
2.2 Mounting the Key Safe
The Key Keep 1 is designed for surface mounting. Choose a secure location, such as a wall or sturdy post, that is discreet yet accessible. Use appropriate tools and fasteners for your chosen surface to ensure a firm installation.
Image: The Squire Key Keep 1 securely mounted on a stone wall, demonstrating its discreet and robust installation.
Image: The Squire Key Keep 1 mounted on a stone wall, with its cover open to reveal keys stored inside, illustrating its capacity.
2.3 Setting the Combination
The factory default combination is typically 0-0-0-0. You must change this to a personal, memorable code immediately after installation.
- Open the shutter hatch to reveal the combination dials and the opening lever.
- Dial the existing combination (factory default 0-0-0-0).
- Press down on the opening lever to open the safe.
- Inside the safe, locate the reset lever or button (refer to the diagram below).
- Move the reset lever to the 'SET' position or press the reset button.
- While the reset mechanism is engaged, dial your new desired 4-digit combination.
- Return the reset lever to the 'LOCK' position or release the reset button.
- Close the safe door and scramble the dials to lock it. Test your new combination before fully closing the shutter.
Image: A visual guide detailing the three steps to open the Squire Key Keep 1: opening the shutter, dialing the combination, and pressing the opening lever.
3. Operation
3.1 Opening the Key Safe
- Slide the protective shutter downwards to reveal the combination dials.
- Rotate the dials to align your secret 4-digit combination.
- Press the release lever located below the dials. The door will spring open.
- Retrieve or place keys as needed.
3.2 Closing the Key Safe
- Ensure the door is fully closed and latched.
- Scramble the combination dials to secure the lock.
- Slide the protective shutter upwards to cover the dials, protecting them from weather and concealing the combination.
3.3 Changing the Combination (Recoding)
To change the combination, follow the steps outlined in Section 2.3. It is recommended to change your combination periodically for enhanced security.
Video: An official video from Squire Locks demonstrating the features and operation of the Squire Key Safe, including how to access and secure keys.
4. Maintenance
The Squire Key Keep 1 is designed for minimal maintenance due to its robust construction.
- Cleaning: Periodically wipe the exterior with a damp cloth to remove dirt and grime. Avoid abrasive cleaners or solvents.
- Lubrication: The internal mechanism is generally self-lubricating. If the dials become stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts.
- Weather Protection: While weatherproof, ensure the protective shutter is always closed when not in use to prevent water and debris from entering the mechanism.
5. Troubleshooting
5.1 Safe Will Not Open
- Incorrect Combination: Double-check that you are entering the correct 4-digit combination. Ensure each dial is precisely aligned with the indicator mark.
- Dials Stiff: If the dials are stiff, try applying a small amount of silicone lubricant.
- Lever Stuck: Ensure no debris is obstructing the release lever.
5.2 Safe Will Not Close
- Obstruction: Check for any items inside the safe that might be preventing the door from closing completely.
- Mechanism Misalignment: Ensure the internal locking mechanism is not jammed. Gently try to reseat the door.
5.3 Combination Dials Are Hard to Turn
- Dirt/Debris: Clean the dials and surrounding area.
- Lack of Lubrication: Apply a small amount of silicone-based lubricant to the dials and their shafts.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Squire |
| Model Number | KEY KEEP 1 (KEYKEEP1) |
| Lock Type | 4-Wheel Combination, Recodable |
| Material | Die Cast Alloy |
| Product Dimensions (D x W x H) | 3.35" x 1.38" x 4.72" (85mm x 35mm x 120mm) |
| Chamber Depth | 2 Inches |
| Item Weight | 500 Grams (1.1 lbs) |
| Mounting Type | Surface Mount |
| Special Feature | 10,000 secure combinations |
| Water Resistance Level | Not Water Resistant (Weatherproof design protects mechanism) |
| Included Components | 1 x Henry Squire 4 Wheel Combination Key Safe |
Image: Detailed dimensions of the Squire Key Keep 1, showing height, width, and depth measurements.
7. Warranty & Support
7.1 Manufacturer's Warranty
Squire provides a 10-year guarantee for this product. We design our products to inspire confidence. With appropriate maintenance and normal use, this product is guaranteed for 10 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
7.2 Customer Support
For technical assistance, warranty claims, or further inquiries, please contact Squire customer support through their official website or the retailer where the product was purchased. Please have your model number (KEY KEEP 1) and proof of purchase available when contacting support.