Olympus FL-LM2 Flash Unit Instruction Manual

1. Product Overview

The Olympus FL-LM2 Flash is a dedicated accessory for the Olympus OM-D E-M5 digital camera. It serves as a replacement or additional flash unit, maintaining the camera's dustproof and splash-proof construction for reliable performance in various environments.

A close-up view of the compact Olympus FL-LM2 flash unit, showcasing its sleek black design and the Olympus branding. The flash head is visible, indicating its readiness for attachment to a camera's hot shoe.

2. Key Features

• Genuine Olympus accessory
• Replacement flash for the bundled OM-D E-M5 flash
• Dust and splashproof construction

3. Setup

3.1 Attaching the Flash

Align the base of the FL-LM2 flash with the hot shoe on your Olympus OM-D E-M5 camera. Slide the flash firmly into place until it clicks securely. Ensure it is fully seated to establish proper electrical contact.

3.2 Power Source

The FL-LM2 flash draws its power directly from the camera body when attached to the hot shoe. No separate batteries are required for the flash unit itself.

4. Operating the Flash

4.1 Basic Operation

Once securely attached and the camera is powered on, the FL-LM2 flash is ready for use. The flash operates in conjunction with your camera's flash modes. It will automatically fire when required by the camera's exposure settings, or when manually activated through the camera's menu.

4.2 Camera Settings

For detailed information on adjusting flash modes, intensity, and other related settings, please refer to the comprehensive instruction manual provided with your Olympus OM-D E-M5 digital camera. The camera's menu system provides control over the flash's behavior.

5. Maintenance

5.1 Cleaning

To clean the flash unit, gently wipe the exterior with a soft, dry cloth. For stubborn dirt, a slightly dampened cloth can be used, followed immediately by a dry cloth. Avoid using harsh chemicals or abrasive materials. Ensure the flash contacts on both the unit and the camera's hot shoe are clean and free of debris.

5.2 Storage

When not in use, detach the flash from the camera and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Using the provided protective cap for the hot shoe mount is recommended to prevent dust and damage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

This Olympus product is covered by a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or visit the official Olympus website. For technical support, service, or replacement parts, please contact Olympus customer service directly.