1. Product Overview
The American Standard Cadet PRO Two-Piece 1.28 gpf/4.8 Lpf Compact Chair Height Elongated Toilet is engineered for optimal performance and value. This model features a compact elongated bowl designed to fit in spaces typically accommodating round-front toilets, while providing the comfort of an elongated design. The Cadet Flushing System ensures a high-performance flush with an efficient water consumption rate of 1.28 gallons per flush, using 20% less water than standard 1.6 gpf toilets.
Key Features:
- PowerWash Rim: Designed to scrub the bowl with each flush, ensuring thorough cleaning.
- High Efficiency Toilet (HET): Ultra-low consumption (4.8 Lpf / 1.28 gpf) for water savings.
- EZ-Install Tools: Includes tools to simplify the installation process.
- Two-Piece Design: Consists of a separate bowl and tank (seat sold separately).
- Space-Saving Elongated Bowl: Offers the comfort of an elongated bowl while fitting into smaller bathroom layouts.
Image: American Standard Cadet PRO Two-Piece Elongated Toilet, showcasing its design and features.
Product Video:
Video: An overview of American Standard products, highlighting various innovations and designs.
2. Setup and Installation
This section provides a general guide for installing your American Standard Cadet PRO toilet. For detailed, step-by-step visual instructions, please refer to the official installation video below. Always ensure the water supply is turned off before beginning any installation work.
Installation Video:
Video: Official installation guide for the American Standard Cadet PRO Two-Piece Toilet. This video demonstrates each step of the installation process, from unboxing to final adjustments.
General Installation Steps:
- Preparation: Turn off the water supply to the toilet. Remove the old toilet if applicable and clean the flange area. Gather all necessary tools and components.
- Install Closet Bolts: Insert the closet bolts into the floor flange channels and slide them into position, parallel to the wall.
- Prepare Wax Ring: Place the wax ring evenly around the waste flange on the bottom of the toilet bowl, ensuring the tapered end is positioned correctly.
- Position Toilet Bowl: Carefully lower the toilet bowl onto the floor flange, aligning the bolt holes with the closet bolts. Apply even weight to compress the wax ring.
- Secure Toilet Bowl: Loosely install the retainer washers and nuts onto the closet bolts. Alternately tighten the nuts until the toilet is firmly seated on the floor. Do not overtighten. If necessary, cut the bolt heights to size before installing caps.
- Install Tank: Attach the tank to the bowl, ensuring the tank-to-bowl gasket and tube gasket are properly seated. Tighten the tank bolts alternately until the tank makes firm contact with the front and back of the bowl (china-to-china contact).
- Connect Water Supply: Connect the water supply line (sold separately) to the fill valve and hand-tighten the nut.
- Turn On Water & Adjust: Turn on the water supply. Adjust the water level in the tank to the indicated level by turning the water level adjustment knob on the fill valve.
3. Operating Instructions
The American Standard Cadet PRO toilet is designed for simple and efficient operation.
Flushing the Toilet:
To flush, simply press down on the trip lever located on the side of the tank. The Cadet Flushing System will initiate a powerful flush using 1.28 gallons (4.8 liters) of water. The PowerWash rim actively cleans the bowl during each flush.
Water Efficiency:
This toilet is a High Efficiency Toilet (HET) and WaterSense certified, meaning it uses significantly less water than older models. Ensure the water level in the tank is set correctly for optimal performance and water conservation.
4. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your American Standard Cadet PRO toilet.
Cleaning:
- Clean the exterior surfaces with a soft cloth and mild, non-abrasive cleaners.
- For the bowl interior, use a toilet brush and a non-abrasive toilet bowl cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the toilet's finish.
Component Checks:
- Periodically check the water supply line and connections for any signs of leaks.
- Inspect the flapper or flush valve for wear and tear. Replace if necessary to prevent leaks.
- Ensure the fill valve is functioning correctly and maintaining the proper water level in the tank.
5. Troubleshooting
If you encounter issues with your toilet, consult the following common troubleshooting tips. For persistent problems, contact a qualified plumber or American Standard customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Toilet runs continuously | Flapper not sealing, fill valve malfunction, water level too high. | Check flapper for debris or wear; adjust water level in tank; inspect fill valve. |
| Weak flush | Low water level, clogged rim jets, partially closed water supply valve. | Adjust water level; clean rim jets; ensure water supply valve is fully open. |
| Leaking at base | Loose closet bolts, damaged wax ring, cracked bowl. | Tighten closet bolts (do not overtighten); replace wax ring; inspect bowl for damage. |
| Slow tank refill | Partially closed water supply valve, clogged fill valve. | Ensure water supply valve is fully open; clean or replace fill valve. |
6. Specifications
Detailed technical specifications for the American Standard Cadet PRO Two-Piece Elongated Toilet.
| Specification | Detail |
|---|---|
| Model Number | 215FA104.020 |
| Color | White |
| Material | Vitreous China (Toilet), Plastic (Seat - if included) |
| Item Weight | 110 Pounds |
| Installation Type | Floor Mounted |
| Bowl Shape | Elongated (Compact Chair Height) |
| Water Consumption | 1.28 Gallons per Flush (4.8 Lpf) |
| Certification | WaterSense |
| Included Components | 2-piece toilet (bowl and tank) |
| Product Dimensions | 31 x 16.5 x 14 inches |
7. Warranty and Support
American Standard products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official American Standard website.
If you require technical assistance, replacement parts, or have questions regarding your Cadet PRO toilet, please contact American Standard customer support through their official website or the contact information provided in your product packaging.
