American Standard Cadet Pro Elongated Two-Piece Toilet User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your American Standard Cadet Pro Elongated Two-Piece Toilet. Please read all instructions carefully before beginning installation or use to ensure proper function and safety.

The Cadet Pro toilet features an elongated bowl for comfort, high-efficiency 1.28 gallons per flush (GPF) operation, and is WaterSense® certified. It also includes an EverClean® surface for enhanced cleanliness and a PowerWash Rim for effective bowl cleaning.

Image: The American Standard Cadet Pro Elongated Two-Piece Toilet, showcasing its design and components.

Safety Information

Always turn off the water supply to the toilet before performing any maintenance or installation. Wear appropriate personal protective equipment, such as gloves and eye protection, during installation and cleaning. Handle ceramic components with care to prevent breakage and injury. If you are unsure about any step, consult a qualified plumber.

What's in the Box

Verify that all components are present before beginning installation. Contents may vary slightly based on the specific version purchased.

• Toilet Bowl (Elongated, Chair-Height)
• Toilet Tank
• Tank-to-Bowl Gasket
• Tank-to-Bowl Bolts, Washers, and Nuts
• Closet Bolts, Washers, and Nuts for floor mounting
• Bolt Caps
• Wax Ring with Sleeve
• Fill Valve Assembly
• Flush Valve Assembly
• Trip Lever
• Toilet Seat (Sold separately, but installation instructions for seat are typically included with the seat itself)

Image: Exploded view of the toilet components, including the tank, bowl, and various hardware pieces.

Recommended Tools

The following tools are recommended for installation:

• Adjustable Wrench
• Screwdriver (Phillips and Flathead)
• Pliers
• Utility Knife (for wax ring trimming if needed)
• Tape Measure
• Level
• Rags or old towels (for cleanup)
• Flashlight (optional, for better visibility)

Setup and Installation

Follow these steps for proper installation of your Cadet Pro toilet. Refer to the official installation video for visual guidance.

1. Prepare the Installation Area

• Ensure the existing water supply valve is turned off.
• Clear the area around the toilet flange.

2. Install Closet Bolts

• Insert the closet bolts into the floor flange channel.
• Slide them into place, parallel to the wall.

3. Install Wax Ring

• Invert the toilet bowl onto a cushioned surface to prevent damage.
• Evenly install the wax ring around the waste flange on the toilet bowl, ensuring the tapered end of the ring is positioned correctly.

4. Position the Toilet Bowl

• Carefully position the toilet bowl over the floor flange, aligning the closet bolts with the mounting holes.
• Apply even weight to the toilet to compress the wax ring and firmly seat the bowl on the floor.
• Loosely install the retainer washers and nuts onto the closet bolts.
• Alternately tighten the nuts until the toilet is firmly seated. Do not overtighten.
• If necessary, cut the bolt heights to size before installing the decorative caps.
• Hand-tighten the bolt caps onto the washers.

5. Install the Tank

• Attach the tank to the bowl, ensuring the tank-to-bowl gasket and tube gasket are properly seated.
• Tighten the tank bolts alternately until the tank contacts the front and back of the bowl, achieving china-to-china contact.

6. Install the Toilet Seat

• Install your toilet seat according to the instructions provided with the seat. The Cadet Pro is designed for chair-height comfort, measuring 17 inches tall including the seat.

Image: The Cadet Pro toilet installed in a bathroom, highlighting its chair-height design.

Official Installation Video:

Video: American Standard Cadet PRO Installation Video. This video provides a step-by-step guide for installing the Cadet Pro Two-Piece Toilet.

Operating Instructions

The Cadet Pro toilet is designed for efficient and powerful flushing.

• Flushing: Press the trip lever to activate the flush. The 3-inch flush valve ensures a powerful flush, using 1.28 gallons of water per flush.
• PowerWash Rim: The PowerWash Rim feature scrubs the bowl clean with every flush, dispersing water evenly throughout the bowl.
• Siphoning Jet: A perfectly positioned water jet captures the circular flow of water for optimal performance, siphoning waste into the trapway.

Image: Diagram illustrating the Cadet Flushing system, including the 3-inch flush valve, 360-degree cleaning, powerful siphoning water jet, and fully glazed trapway.

Image: Visual representation of the PowerWash Rim feature, showing water flow cleaning the bowl.

Maintenance

Regular cleaning and maintenance will ensure the longevity and performance of your toilet.

• Cleaning the EverClean® Surface: The EverClean® antimicrobial surface is built into the finish to inhibit the growth of stain and odor-causing bacteria, mold, and mildew on the surface. Clean regularly with non-abrasive toilet bowl cleaners. Avoid harsh chemicals or abrasive tools that could damage the finish.
• Checking for Leaks: Periodically inspect the tank, bowl, and water supply connections for any signs of leaks. Tighten connections as needed.
• Flapper/Fill Valve Inspection: Check the flapper and fill valve for proper operation and wear. Replace components if they are not functioning correctly.

Image: Illustration of the EverClean® Antimicrobial Surface protecting the toilet against mold, mildew, odor, and stain-causing bacteria.

EverClean® Surface Video:

Video: American Standard EverClean. This video explains the benefits and function of the EverClean antimicrobial surface.

Troubleshooting

If you encounter any issues with your toilet, refer to the following common troubleshooting tips:

• Toilet not flushing properly: Check the water level in the tank. Ensure the flapper chain is not too long or too short. Inspect the flush valve for obstructions.
• Continuous running water: Check the flapper for a proper seal. Adjust the fill valve to ensure it shuts off completely when the tank is full.
• Leaks: Inspect all connections for tightness. Check the wax ring for proper seal.

For more complex issues, it is recommended to contact a professional plumber or American Standard customer support.

Specifications

Warranty and Support

The American Standard Cadet Pro toilet is backed by an industry-leading warranty:

• Chinaware: Lifetime Limited Warranty
• Mechanical Parts: 5-Year Limited Warranty
• Toilet Seat: 1-Year Limited Warranty (if included)

For technical support, replacement parts, or warranty claims, please contact American Standard customer service. Refer to the official American Standard website for the most current contact information and detailed warranty terms.

Online Resources: www.americanstandard-us.com