Nfusion Braxton White Dining Chair Set (Model 213818) - User Manual

1. Introduction

Welcome to the user manual for your Nfusion Braxton White Dining Chair Set, Model 213818. This set includes two dining chairs designed to provide comfortable and stylish seating for your dining area or as additional seating. Each chair features white bonded leather upholstery, elegant diamond-patterned tufting, and sturdy espresso-stained wood legs.

Please read this manual thoroughly before assembly and use to ensure proper setup and to maximize the lifespan of your chairs.

An overview of the two Nfusion Braxton White Dining Chairs, showcasing their design and white bonded leather upholstery.

Detailed view of the elegant diamond-patterned tufting on the chair's white bonded leather backrest.

2. Setup and Assembly

Your Nfusion Braxton Dining Chairs require minimal assembly. Please ensure all components are present before beginning.

2.1. Package Contents

• 2 x Chair Bodies (upholstered seat and back)
• 8 x Chair Legs (espresso-stained wood)
• Hardware Pack (screws, washers, Allen wrench)

2.2. Tools Required

• Included Allen Wrench
• Phillips Head Screwdriver (optional, for minor adjustments)

2.3. Assembly Instructions

1. Carefully unpack all components and place them on a soft, clean surface to prevent scratching.
2. Identify the chair body and the four individual legs for one chair.
3. Locate the pre-drilled holes on the underside of the chair body where the legs attach.
4. Align each leg with its corresponding hole. Ensure the angle of the leg is correct for stability.
5. Insert the provided screws with washers through the leg brackets and into the chair body.
6. Using the included Allen wrench, tighten all screws securely. Do not overtighten, as this may damage the wood.
7. Repeat steps 2-6 for the second chair.
8. Once both chairs are assembled, gently place them upright and test for stability. If a chair wobbles, slightly loosen the leg screws, apply even pressure to the seat, and then retighten the screws.

3. Operating Instructions

The Nfusion Braxton Dining Chairs are designed for comfortable and stable seating.

• Proper Use: These chairs are intended for single-person use in a dining or general seating environment.
• Placement: Always place the chairs on a flat, level surface to ensure stability and prevent wobbling.
• Weight Capacity: While sturdy, avoid exceeding reasonable weight limits to prevent damage.
• Movement: When moving the chairs, lift them rather than dragging to protect the legs and floor.

4. Maintenance and Care

Regular maintenance will help preserve the appearance and longevity of your dining chairs.

4.1. Upholstery Care (Bonded Leather)

• Daily Cleaning: Dust regularly with a soft, dry cloth.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
• General Cleaning: For light cleaning, wipe the surface with a soft cloth dampened with distilled water. Avoid using excessive moisture.
• Avoid: Do not use harsh chemicals, abrasive cleaners, solvents, or furniture polish on bonded leather, as these can damage the material.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading and drying of the material.

4.2. Wood Frame and Legs Care

• Wipe wood surfaces with a soft, dry cloth.
• Avoid placing hot items directly on wood surfaces.
• Periodically check and tighten all leg screws to ensure the chair remains stable.

5. Troubleshooting

If you encounter any issues with your chairs, refer to the following common solutions:

• Chair Wobbles:
  Ensure all leg attachment screws are securely tightened. Check that the chair is placed on a completely flat and even surface. If the floor is uneven, consider using furniture pads or glides to level the chair.
• Loose Parts:
  Periodically inspect all screws and connections. If any feel loose, gently tighten them using the provided Allen wrench. Do not overtighten.
• Upholstery Stains:
  Refer to the cleaning instructions in the Maintenance section (4.1). For stubborn stains, it is recommended to consult a professional upholstery cleaning service.
• Squeaking Noises:
  Squeaking can sometimes occur from loose joints. Try tightening all screws. If the issue persists, carefully disassemble and reassemble the affected joint, ensuring all parts are correctly aligned.

6. Specifications

Detailed specifications for the Nfusion Braxton White Dining Chair (Model 213818):

A visual representation of the chair's dimensions: 35.83 inches height, 22.44 inches depth, and 17.2 inches width.

7. Warranty Information

Nfusion provides a 90-day warranty against manufacturing defects from the date of purchase.

This warranty covers defects in materials and workmanship under normal household use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, alterations, or normal wear and tear. Proof of purchase is required for all warranty claims.

8. Customer Support

For any questions, assistance, or to report a defect, please contact Nfusion customer support. When contacting support, please have your model number (213818) and proof of purchase readily available to expedite service.

Thank you for choosing Nfusion.