Astatic 302-VS6

Astatic 302-VS6 Noise Cancelling External CB Speaker

Model: 302-VS6 | Brand: Astatic

Introduction

The Astatic 302-VS6 is a high-quality external speaker designed to enhance audio clarity for CB radios. Featuring advanced noise-cancelling technology, this speaker helps to reduce background interference, providing clearer reception of voice communications. Its robust design and easy installation make it an ideal accessory for any CB radio setup.

Product Features

Noise Canceling External CB Speaker
Noise Canceling Technology
10 Watts Power Rating
8 Ohms Impedance
10' Power Cord with 3.5mm Mini Plug

Package Contents

Please ensure all items are present in the package:

Astatic 302-VS6 External CB Speaker
10-foot power cord with 3.5mm mini plug
Mounting bracket
Mounting hardware

Image: The retail packaging box for the Astatic 302-VS6 speaker, showing the product and key features.

Setup and Installation

Follow these steps to properly set up your Astatic 302-VS6 external CB speaker:

Choose a Mounting Location: Select a stable and convenient location for the speaker, ideally near your CB radio. Ensure the location allows for the 10-foot power cord to reach the radio's external speaker jack without strain.
Attach Mounting Bracket: Use the provided mounting bracket and hardware to securely attach the speaker to your chosen surface. Ensure the speaker is firmly mounted to prevent vibrations and ensure optimal sound quality.
Connect to CB Radio: Insert the 3.5mm mini plug from the speaker's 10-foot power cord into the external speaker output jack on your CB radio. This jack is typically labeled "EXT SPKR" or "External Speaker".
Secure Cabling: Route the speaker cable safely, ensuring it does not interfere with vehicle operation or other equipment.

Astatic 302-VS6 speaker with attached power cord

Image: The Astatic 302-VS6 speaker showing its integrated 10-foot power cord with a 3.5mm mini plug for connection.

Operation

Once connected, the Astatic 302-VS6 speaker will output audio from your CB radio. The speaker is designed to provide clear and loud audio, especially in noisy environments.

Volume Control: Adjust the audio volume directly from your CB radio's volume control. The external speaker's volume is controlled by the radio it is connected to.
Noise Cancelling Feature: The Astatic 302-VS6 features a noise-cancelling function. Locate the small button or switch on the side of the speaker. Engaging this feature activates a filter that helps to reduce static and background noise, improving the clarity of received transmissions. Experiment with this feature to find the optimal setting for your listening environment.

Front and side view of the Astatic 302-VS6 noise cancelling external CB speaker

Image: A detailed view of the Astatic 302-VS6 speaker, highlighting its front grille and the side-mounted noise-cancelling switch.

Maintenance

To ensure the longevity and optimal performance of your Astatic 302-VS6 speaker, follow these simple maintenance guidelines:

Cleaning: Wipe the speaker's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the finish.
Environmental Protection: While durable, the speaker is not waterproof. Protect it from direct exposure to moisture, extreme temperatures, and direct sunlight to prevent damage.
Cable Inspection: Periodically check the power cord and plug for any signs of wear, fraying, or damage. Replace if necessary to ensure safe operation.

Troubleshooting

If you encounter issues with your Astatic 302-VS6 speaker, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No sound from speaker	Speaker not properly connected to CB radio. CB radio volume is too low or muted. Faulty cable or speaker.	Ensure the 3.5mm mini plug is fully inserted into the CB radio's external speaker jack. Increase the volume on your CB radio. Check if the radio's internal speaker is working. Try connecting the speaker to another audio source (e.g., a portable radio with a 3.5mm jack) to test if the speaker is functional.
Poor sound quality / Excessive static	Noise cancelling feature not engaged or improperly set. Interference from other electronic devices. Weak signal from CB radio.	Engage the noise-cancelling switch on the side of the speaker. Move the speaker away from other electronic devices that might be causing interference. Check your CB radio's antenna and signal strength.
Noise cancelling button feels loose or ineffective	Plastic cover over button may be loose. Internal mechanism issue.	If the plastic cover is loose, it can often be re-secured. If the button itself does not seem to engage or disengage the filter, contact customer support.

Specifications

Dimensions of the Astatic 302-VS6 speaker: 5.1 inches deep, 3 inches wide, 5.6 inches high

Image: Visual representation of the Astatic 302-VS6 speaker's dimensions.

Model Name: VS6
Speaker Type: CB Radio External Speaker
Special Feature: Noise Cancelling Technology
Recommended Uses: For CB Radios
Compatible Devices: CB Radios
Power Rating: 10 Watts (Maximum Output)
Impedance: 8 Ohms
Connectivity: Wired, 3.5mm audio jack
Cord Length: 10 feet
Color: Black
Product Dimensions (D x W x H): 5.1" x 3" x 5.6"
Item Weight: 0.2 Ounces
Mounting Type: Tabletop Mount (with included bracket)
Manufacturer: Astatic
ASIN: B006OFWBE8
UPC: 796793684588, 093642024886

Warranty and Support

The Astatic 302-VS6 Noise Cancelling External CB Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included with your purchase or visit the official Astatic website.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Astatic customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.