Product Overview
The Honda Genuine Accessories 08L92-T0A-100 Trailer Hitch and Ball is designed to provide a secure towing solution for your vehicle. This receiver-style hitch accommodates various coupler designs, allowing for versatile towing applications. It is specifically compatible with 2012-2013 Honda CR-V models.
Key Features
- Receiver-style design for various coupler types.
- Towing capacity up to 1,500 pounds.
- Includes draw bar, retaining pin, and clip.
- Designed for 2012-2013 Honda CR-V.
- Genuine Honda accessory ensures compatibility and quality.
Package Contents
Verify that all components are present before beginning installation:
- Trailer Hitch Assembly
- Draw Bar
- Retaining Pin
- Clip
- Installation Hardware (bolts, washers, nuts)
Image: All components of the Honda Trailer Hitch and Ball package, including the main hitch assembly, draw bar, retaining pin, clip, and installation hardware, displayed on a clean white surface.
Setup and Installation
Installation of the Honda Genuine Trailer Hitch requires specific tools and technical knowledge. It is highly recommended that installation be performed by a qualified Honda service technician or a professional installer to ensure proper fitment and safety.
Important Considerations:
- This hitch requires a separate Trailer Hitch Harness (not included) for electrical connections if towing a trailer with lights.
- Installation may involve removal of vehicle trim panels and exhaust components.
- Refer to the official Honda service manual for your specific vehicle model (2012-2013 CR-V) for detailed, step-by-step instructions.
- Ensure all fasteners are tightened to the manufacturer's specified torque values.
Image: The main Honda Trailer Hitch assembly, showcasing its robust construction and receiver opening.
Operating Instructions
Once the trailer hitch is properly installed, follow these guidelines for safe operation:
- Attach Draw Bar: Insert the draw bar into the receiver tube of the hitch.
- Secure with Pin and Clip: Align the holes in the draw bar and receiver, then insert the retaining pin. Secure the pin with the clip to prevent it from dislodging.
- Connect Trailer: Attach your trailer's coupler to the ball on the draw bar. Ensure the coupler is fully seated and locked onto the ball.
- Safety Chains: Always cross and attach safety chains from the trailer to the designated attachment points on the hitch or vehicle frame.
- Electrical Connection: If your trailer has lights, connect the trailer's wiring harness to the vehicle's trailer hitch harness (if installed). Verify all lights are functioning correctly (brake lights, turn signals, running lights).
- Weight Distribution: Ensure the trailer load is properly distributed to maintain stability and avoid exceeding the vehicle's tongue weight and towing capacity.
- Pre-Trip Inspection: Before each trip, inspect the hitch, draw bar, pin, clip, and all connections for wear, damage, or looseness.
Towing Capacity: The maximum towing capacity for this hitch is 1,500 pounds. Always adhere to your vehicle's specific towing capacity limits as outlined in your owner's manual, which may be lower than the hitch's capacity.
Maintenance
Regular maintenance helps ensure the longevity and safe operation of your trailer hitch.
- Inspection: Periodically inspect the hitch for signs of rust, cracks, bends, or other damage. Pay close attention to welds and mounting points.
- Cleaning: Clean the hitch regularly, especially after exposure to road salt, dirt, or harsh weather conditions. Use mild soap and water, then rinse thoroughly.
- Lubrication: Apply a thin layer of grease to the hitch ball to reduce friction and wear on the trailer coupler.
- Fasteners: Check all mounting bolts and nuts periodically to ensure they remain tight. Re-torque to specifications if necessary.
- Corrosion Protection: If the powder-coated finish is chipped or scratched, touch up with rust-inhibiting paint to prevent corrosion.
Troubleshooting
This section addresses common issues that may arise with your trailer hitch.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hitch appears loose or rattles. | Loose mounting bolts. | Inspect and re-torque all mounting bolts to factory specifications. |
| Difficulty inserting draw bar. | Receiver tube or draw bar is dirty/corroded; minor misalignment. | Clean the receiver tube and draw bar. Apply a thin layer of grease. Ensure proper alignment. |
| Trailer lights not working. | Faulty trailer wiring harness; incorrect connection; blown fuse. | Check all electrical connections. Inspect the trailer hitch harness and vehicle fuses. Consult a professional if issues persist. |
| Excessive sway during towing. | Improper weight distribution on trailer; overloaded trailer; worn suspension components. | Adjust trailer load for proper tongue weight. Do not exceed towing capacity. Inspect vehicle and trailer suspension. Consider a weight distribution hitch if applicable. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 08L92-T0A-100 |
| Brand | Honda |
| Compatibility | 2012-2013 Honda CR-V |
| Towing Capacity | Up to 1,500 pounds |
| Item Weight | Approximately 42.5 pounds |
| Product Dimensions | Approximately 45 x 25 x 8 inches |
| Finish Type | Powder Coated |
| Receiver Style | Accommodates various coupler designs |
Warranty Information
As a Honda Genuine Accessory, this product is typically covered by Honda's limited warranty for genuine parts and accessories. Specific warranty terms, conditions, and duration may vary. Please refer to your original purchase documentation or contact an authorized Honda dealership for detailed warranty information applicable to your region and purchase.
Customer Support
For technical assistance, installation inquiries, or to purchase replacement parts, please contact your authorized Honda dealership. You can also visit the official Honda website for support resources and contact information.
Online Resources: www.honda.com
