Woods 7-Day Indoor Mechanical Vacation Security Timer User Manual

Introduction

This manual provides comprehensive instructions for the Woods 50003 7-Day Indoor Security Mechanical Timer. Designed for ease of use, this timer allows you to automatically control lamps, appliances, and other electrical devices, enhancing home security and saving energy. It features pre-programmed settings for random on/off times, repeating weekly, and includes a manual override switch for convenience. This timer is intended for indoor use only and features a grounded outlet.

Product Overview

Front view of the Woods 7-Day Indoor Mechanical Timer, showing the central dial for time setting and the "TIME NOW" indicator.

Side view of the timer, highlighting the electrical outlets where devices are plugged in.

Back view of the timer, displaying product specifications and safety certifications.

Key Features

• Turns plugged-in device ON and OFF twice a day at random times.
• Preprogrammed settings; repeats weekly.
• Perfect home accessory while you are away on vacation to give home lived-in look and increase security.
• CFL; LED; Incandescent compatible.
• 125Vac; 60Hz; 15A 1875W Resistive; 8A; 1000W Tungsten; 5A Ballast.

Setup Instructions

1. Unpack the Timer: Carefully remove the Woods 7-Day Indoor Mechanical Timer from its packaging.
2. Locate a Suitable Outlet: Choose a standard 125V AC wall outlet for indoor use only. Ensure the outlet is easily accessible.
3. Plug in the Timer: Insert the timer's three-pronged plug into the wall outlet.
4. Connect Your Device: Plug the appliance or lamp you wish to control into the grounded outlet(s) on the side of the timer. The timer has two grounded outlets, allowing control of two devices simultaneously.
5. Initial Power Check: Ensure the device plugged into the timer is in the "ON" position if it has its own power switch.

Operating Instructions

Setting the Automatic Timer

The Woods 50003 timer operates on a 7-day cycle with pre-programmed random on/off times to simulate occupancy, ideal for vacation security. The central dial represents a 24-hour period, with segments for AM and PM. The timer automatically turns devices on and off twice a day at random times, repeating weekly.

1. Set Current Time: Rotate the central dial clockwise until the "TIME NOW" arrow points to the current time of day. The dial is marked with AM and PM hours.
2. Activate Timer Mode: Ensure the manual override switch (located on top of the timer) is set to "TIMER ON".
3. Verify Operation: The timer will now automatically turn your connected devices on and off according to its pre-programmed random schedule, repeating every week.

Manual Override

If you need to bypass the timer's automatic schedule and turn your device on or off manually, use the override switch:

• To keep the device continuously ON, slide the switch from "TIMER ON" to "OUTLET ON".
• To resume automatic timer operation, slide the switch back to "TIMER ON".

Specifications

Maintenance

To ensure the longevity and proper functioning of your Woods 7-Day Indoor Mechanical Timer, follow these simple maintenance guidelines:

• Cleaning: Disconnect the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: If storing the timer for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check the timer and its cord for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately and replace the unit.

Troubleshooting

If you encounter issues with your Woods 7-Day Indoor Mechanical Timer, refer to the following common problems and solutions:

• Device Not Turning On/Off Automatically:
  • Ensure the timer is securely plugged into a working wall outlet.
  • Verify that the appliance plugged into the timer is in the "ON" position.
  • Check that the manual override switch on the timer is set to "TIMER ON".
  • Confirm that the "TIME NOW" arrow on the dial is correctly set to the current time.
• Timer Dial Not Moving:
  • Ensure the timer is receiving power from the wall outlet.
  • The timer is mechanical; ensure no obstructions are preventing the dial from rotating.
• No Power to Connected Device:
  • Test the wall outlet with another device to confirm it is functional.
  • Check the appliance's own power cord and switch.

If these steps do not resolve the issue, please refer to the support section.

Warranty and Support

For detailed warranty information or further technical assistance, please refer to the official user manual provided by Woods. A digital version of the user manual can be accessed via the following link:

Download User Manual (PDF)

You may also visit the official Woods website or contact their customer support for additional help.