1. Important Safety Instructions
Please read all instructions carefully before using your Beautyrest Electric Blanket. Retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or injury.
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use with pets.
- Do not use if wet.
- Do not use with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Do not use with adjustable beds. If used on an adjustable bed, ensure the blanket and cord do not become pinched or kinked.
- Do not tuck in or drape the blanket under the mattress. Ensure the blanket is spread out evenly.
- Do not use pins or other metallic objects. These can damage the heating elements.
- Do not dry clean. Dry cleaning solvents may damage the insulation of the heating element.
- Unplug when not in use.
- This blanket is designed to virtually eliminate Electro Magnetic Field (EMF) emissions.
- The product is UL certified for maximum safety.
Refer to the 'Dos and Don'ts' section for visual guidance on safe usage.
2. Product Overview
The Beautyrest Electric Blanket provides customizable warmth and comfort. It features ultra-soft ribbed micro fleece fabric and flexible wires for enhanced comfort. This King size blanket includes two controllers for individual heat zone adjustment.
- Material: 100% Polyester Micro Fleece
- Heat Settings: 20 levels
- Auto Shut-Off: Adjustable 1-10 hours
- Controllers: Two for King/Queen sizes, one for Twin/Full sizes
- EMF: Engineered for lowest possible EMF emissions
Figure 2.1: Beautyrest King Electric Blanket (Blue) on a bed.
Figure 2.2: Dual controllers for King and Queen size blankets.
3. Setup
- Unpack: Carefully remove the electric blanket and controllers from the packaging.
- Placement: Lay the electric blanket flat on your mattress, ensuring it is spread out evenly without any folds or wrinkles. The connector for the controller should be positioned at the foot end of the bed.
- Connect Controllers: For King size blankets, there are two controllers. Connect each controller cord securely to the corresponding connector on the blanket. Ensure the connection is firm.
- Power Connection: Plug the power cord(s) from the controller(s) into a standard 110V-120V AC, 60Hz electrical outlet. Ensure the outlet is easily accessible.
- Controller Placement: Place the controllers on a bedside table or other flat surface where they will not be covered by other bedding. Keep the controller cords loose and untwisted.
Figure 3.1: Proper placement of the electric blanket on a bed.
4. Operating Instructions
Your Beautyrest Electric Blanket features a user-friendly controller with 20 heat settings and an adjustable auto shut-off timer.
- Power On/Off: Press the Power button (circle icon) to turn the blanket on or off.
- Adjust Heat Setting: Use the Up and Down arrow buttons to select your desired heat level from 1 to 20. The current setting will be displayed on the LED screen.
- Preheat Function: Press the Preheat button to quickly warm the blanket before use. The preheat cycle typically runs for one hour.
- Auto Shut-Off Timer: Press the Sleep button to cycle through the auto shut-off timer options (1-10 hours). The blanket will automatically turn off after the selected duration.
- Dual Controls (King/Queen): For King and Queen sizes, each side of the blanket has an independent controller, allowing two users to customize their individual heat settings and auto shut-off times.
It is recommended to start with a lower heat setting and adjust as needed for personal comfort.
5. Care and Maintenance
Proper care will extend the life of your electric blanket. Always disconnect the power cord(s) from the wall outlet and detach the controller(s) from the blanket before cleaning.
Washing Instructions:
- Pre-soak: Pre-soak the blanket for 15 minutes in cold water with a small amount of mild detergent.
- Wash: Wash by hand or on a delicate cycle in a washing machine with cold water and minimal detergent.
- Rinse: Rinse thoroughly in cold water.
- Spin: Remove immediately after the spin cycle to prevent wrinkles.
Drying Instructions:
- Tumble Dry: Tumble dry on medium or low heat for 5 minutes.
- Air Dry: Gently stretch the blanket to its original size and hang to finish drying.
- Do Not: Do not hang with clothespins. Do not iron.
Figure 5.1: Visual guide for washing and drying your electric blanket.
Dos and Don'ts for Use:
Figure 5.2: Important usage guidelines for your electric blanket.
6. Troubleshooting
If your electric blanket is not functioning as expected, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket does not heat or heats unevenly. | Loose connection, power outage, blanket folded/bunched, controller covered. | Ensure all cords are securely connected. Check power outlet. Spread blanket flat and ensure controller is uncovered. Turn off and on again. |
| Controller display is off or flashing. | Power interruption, internal error. | Unplug the blanket from the wall outlet for 5 minutes, then plug it back in. If the issue persists, contact customer service. |
| Blanket feels too hot or not warm enough. | Heat setting too high/low, external factors. | Adjust the heat setting using the Up/Down arrows. Consider room temperature and other bedding. |
If these steps do not resolve the issue, please contact customer service for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | BR54-0186 |
| Size | King |
| Color | Blue |
| Material | 100% Polyester Micro Fleece |
| Product Dimensions | 100"L x 90"W |
| Item Weight | 7.38 Pounds |
| Heat Settings | 20 Levels |
| Auto Shut-Off | Adjustable 1-10 Hours |
| Power Input | 110V-120V AC, 60Hz |
| Included Components | 1 Blanket, 2 Controllers |
| UPC | 675716356491 |
Figure 7.1: Product dimensions illustration.
8. Warranty and Support
Your Beautyrest Electric Blanket is covered by a 5-Year Limited Warranty from the manufacturer. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, product questions, or concerns, please contact Beautyrest customer service. Please have your model number (BR54-0186) and proof of purchase available when contacting support.
Customer Service: Refer to the contact information provided with your product packaging or visit the official Beautyrest website for support details.
