Beautyrest Electric Micro Fleece Heated Blanket Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your Beautyrest Electric Micro Fleece Heated Blanket. Please read all instructions carefully before use and retain for future reference. This blanket is designed to provide warmth and comfort with advanced safety features.

Important Safety Information

Your safety is paramount. Adhere to all warnings and instructions to prevent fire, electric shock, or injury.

General Safety Guidelines:

• UL Certified: This electric blanket is 100% UL certified, ensuring it meets rigorous safety standards.
• Secure Comfort Technology: Engineered to virtually eliminate Electro Magnetic Field (EMF) emissions, providing a safer sleeping environment.
• Auto Shut-Off: Features an adjustable 1-10 hour auto shut-off timer for enhanced safety and energy conservation.
• Proper Placement: Ensure the blanket is spread out evenly on the bed. Do not bunch, fold, or ball up the blanket while it is in operation, as this can cause overheating.
• Controller Uncovered: Always keep the controller uncovered and away from other bedding or heat sources to prevent overheating.
• Cord Management: Keep the power cord loose, not twisted or pinched, to avoid damage.
• Not for Infants or Incapacitated Persons: Do not use with infants, children, or any person who is incapacitated, insensitive to heat, or unable to understand these instructions.
• No Sharp Objects: Avoid using sharp objects or pins with the blanket, as they can damage the heating elements.

Setup Instructions

Follow these steps to properly set up your electric blanket:

1. Unpack: Carefully remove the blanket and controller(s) from the packaging.
2. Placement: Lay the electric blanket flat on your mattress, ensuring it is spread out smoothly without any wrinkles or folds. The connector for the controller should be positioned at the foot of the bed.
3. Connect Controller: Plug the controller cord(s) into the connector(s) on the blanket. Ensure a secure connection.
4. Power Connection: Plug the power cord from the controller(s) into a 110-120V AC electrical outlet. Ensure the outlet is easily accessible.
5. Controller Placement: Place the controller(s) on a bedside table or other stable surface where it will not be covered by other bedding.

Operating Instructions

Your Beautyrest Electric Blanket features a user-friendly controller for personalized comfort.

Controller Features:

• Power On/Off: Press the power button to turn the blanket on or off.
• Heat Settings: Use the up/down arrows to select from 20 heat settings. Start with a lower setting and adjust as needed.
• Preheat Feature: Activate the preheat function to warm the blanket quickly before use.
• Auto Shut-Off Timer: Set the timer for 1 to 10 hours. The blanket will automatically turn off after the selected duration.
• Dual Controllers: Queen and King sizes include two controllers, allowing individual heat settings for each side of the bed. Twin and Full sizes have one controller.

Product Operation Video:

Maintenance

To ensure the longevity and performance of your electric blanket, follow these care instructions:

Washing Instructions:

1. Disconnect: Always unplug the blanket from the wall outlet and disconnect the controller(s) from the blanket before washing.
2. Pre-soak (Optional): For best results, pre-soak the blanket for 15 minutes in cold water with a small amount of mild detergent.
3. Machine Wash: Wash on a delicate or gentle cycle in cold water. Use minimal detergent.
4. Rinse: Rinse thoroughly.
5. Spin Cycle: Remove immediately after the spin cycle to prevent wrinkles.

Drying Instructions:

1. Tumble Dry: Tumble dry on a low or medium heat setting for no more than 5 minutes.
2. Stretch and Hang: Gently stretch the blanket to its original size and hang it over a clothesline or shower rod to finish drying.
3. Do Not Use Clothespins: Avoid using clothespins, as they can damage the heating wires.
4. Do Not Iron: Never iron the electric blanket.
5. Ensure Dryness: Ensure the blanket is completely dry before reconnecting the controller(s) and plugging it back into an outlet.

Troubleshooting

If your electric blanket is not functioning as expected, consult the following common issues and solutions:

• Blanket Not Heating:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Verify that the controller cord is firmly connected to the blanket.
  • Check if the controller is turned on and a heat setting is selected.
  • Confirm the auto shut-off timer has not expired.
• Uneven Heating:
  • Ensure the blanket is spread out smoothly on the bed without any folds, bunches, or items placed on top that could restrict heat distribution.
  • For Queen and King sizes, verify both controllers are set to desired temperatures and functioning correctly.
• Controller Display Not Working:
  • Unplug the blanket from the wall outlet for 5 minutes, then plug it back in to reset the system.
  • Ensure the power outlet is functional by testing it with another appliance.
• Blanket Feels Too Hot/Cold:
  • Adjust the heat setting on the controller to a comfortable level (1-20).
  • Consider the ambient room temperature and adjust accordingly.

If problems persist after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

Your Beautyrest Electric Micro Fleece Heated Blanket is covered by a 5-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact Beautyrest customer service. Keep your purchase receipt and product registration card for potential warranty needs.

Note: The warranty may be voided if the blanket is returned with pet hair or if care instructions are not followed. Please wash the item before returning for service.