Introduction
This manual provides essential information for the proper use and maintenance of your Kenco Ink Rollers, designed specifically for the Monarch 1110 Pricing Gun. These high-quality replacement ink rollers ensure clear and consistent impressions for your labeling needs, providing up to 10,000 impressions per roller.
Setup: Ink Roller Replacement
Replacing the ink roller in your Monarch 1110 pricing gun is a straightforward process. Follow these steps to ensure proper installation and optimal performance.
- Prepare the Pricing Gun: Ensure the Monarch 1110 pricing gun is turned off or disengaged from any active labeling process.
- Locate the Ink Roller Compartment: The ink roller compartment is typically found near the print head of the pricing gun. Refer to your Monarch 1110 pricing gun's original manual for exact location if unsure.
- Remove the Old Ink Roller: Carefully open the ink roller compartment. Gently grasp the old, depleted ink roller and pull it out. Dispose of the old roller responsibly.
- Unpack the New Ink Roller: Remove one Kenco Ink Roller from its packaging. Avoid touching the inked surface directly to prevent smudging.
- Insert the New Ink Roller: Align the new ink roller with the guides in the compartment. Gently push the roller into place until it clicks or sits securely. Ensure it is properly seated and can rotate freely.
- Close the Compartment: Close the ink roller compartment securely.
- Test the Print: Perform a few test prints on scrap labels to ensure the ink is flowing correctly and the impressions are clear.
Figure 1: Kenco Ink Roller in its protective packaging, ready for installation.
Figure 2: Detailed view of the Kenco Ink Roller, showing the ink-saturated foam surface.
Operating
Once the Kenco Ink Roller is correctly installed, the Monarch 1110 pricing gun is ready for operation. The roller automatically applies ink to the print head as labels are advanced and printed. No additional user interaction is required for the ink roller during normal operation.
Maintenance
Kenco Ink Rollers are designed as disposable components. Regular maintenance primarily involves timely replacement.
- Replacement Schedule: Replace the ink roller when print quality begins to degrade, such as faint or inconsistent impressions. Each roller is designed to provide up to 10,000 clear impressions.
- Cleaning: Do not attempt to clean or re-ink the roller. These rollers are pre-inked and intended for single-use until depleted. Attempting to clean or re-ink may damage the roller or the pricing gun.
- Storage: Store unused ink rollers in their original sealed packaging in a cool, dry place away from direct sunlight to preserve ink quality and prevent premature drying.
Troubleshooting
If you encounter issues with your Kenco Ink Roller or print quality, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Faint or Inconsistent Prints | Ink roller is depleted or drying out. | Replace the ink roller with a new Kenco Ink Roller. |
| Smudged Prints | Ink roller not seated correctly or excess ink on print head. | Re-seat the ink roller. If problem persists, check the pricing gun's print head for debris (refer to pricing gun manual). |
| Ink Roller Does Not Fit | Incorrect ink roller model. | Ensure you are using Kenco Ink Rollers specifically designed for the Monarch 1110 Pricing Gun (Model INK1110). |
Specifications
- Brand: Kenco
- Model Compatibility: Monarch 1110 Pricing Gun
- Estimated Impressions: Up to 10,000 per roller
- Item Model Number: INK1110
- Item Weight: 0.32 ounces (per roller)
- Product Dimensions: Approximately 4.5 x 4 x 0.6 inches (packaging dimensions)
- Manufacturer: Kenco
Warranty Information
Specific warranty details for Kenco Ink Rollers are not provided in this document. For information regarding product warranty, please refer to the original product packaging or contact Kenco directly through their official website or customer service channels.
Support
For further assistance or inquiries regarding your Kenco Ink Rollers, please visit the official Kenco website or contact the seller from whom you purchased the product. You may also refer to the Monarch 1110 pricing gun's user manual for specific instructions related to the pricing gun itself.
Kenco Website: Visit the Kenco Store on Amazon
